2085::Santosh Kumar::B-303, Dive Pearl Building, Sec-8::Airoli, Navi Mumbai::91::400708::+91-9869390782::santoshkumar80@gmail.com::Sales&&Management&&Engineering&&Certified or Licensed&&Inspection::http://::Position Desired:Technocommercial Manager ::Corrosion and Coating specialist:: SANTOSH KUMAR
Email: santoshkumar80@gmail.com, Phone: + 91-9 869390782
PROFILE:
Excellent management & research skills.
Strong analytical and quantitative skills resulting from an engineering and research background.
Results-oriented performer with ability to solve complex problems in challenging environments.

EDUCATION:
Master of Technology (Corrosion Science and Engineering) 2003-2005
Indian Institute of Technology Bombay, India

Master of Science (Chemistry) 2000-2002
University of Delhi, India

Bachelor of Science (Chemistry Hons.) 1997-2000
University of Delhi, India

WORK EXPERIENCE:
Head- Quality Control, J.K Surface Coatings Pvt. Ltd., Navi Mumbai. March 2007 - present
Coordination with Offshore (ONGC, Reliance etc.) and onshore( Tata Steels, IOCL) clients to lay out plans and strategy formulation for carrying out Corrosion protective operations mainly Coating at their sites.
Coordination with Project team involving project managers and supervisors to bring out better work efficiency following all the environmental norms and regulations.
Coordination with coatings/chemicals manufacturers & distributors to select best system for application.
Carry out inspections job during and after the operation to check any discrepancies and irregularities to ensure better job quality to our customers.
Also involves quality control, rate analysis, cost Estimation, preparation of tender documents and concept planning in a number of projects. Fully conversant with computerized data analysis, costing, and financial and economic evaluation of projects.
Also fully involved with setting up a new manufacturing plant for coil coatings by our parent company.

Research & Development Engineer, Expanded Incorporation, Navi Mumbai. Oct 2005–15Feb 07
The project involved:
Development of polyurethane based products such as coatings systems, and other related product under CASE family.
Development of polyurea based coatings systems for floor application.
Formulation of polyester polyols and phenolic resins compatible to the specific requirement.

CERTIFICATION:
NACE Coating Inspector Level 1–Certified, Augst-2007,Chennai (India)
Certification Course in “Fire prevention & Fire fighting, Elementary First Aid, Personal survival Technique at Sea” from Marine Training Acadmey, Mumbai.
Certification in “C++ programming (advanced) course” conducted by IIT Bombay-2004
SSPC certification in “Paints and surface coatings for substrate protection” conducted by IIT Bombay, 2005.

PUBLICATIONS/PAPER PRESENTATIONS:
A.S.Khanna, Santosh Kumar “Evaluation and characterizations of paint systems” (soon to be published by Woodhead Publishing Limited, Cambridge)
Santosh Kumar “Polyurea-revolution in coating technology “, Paint India., Augst, 2007
A.S. Khanna , Santosh Kumar “Hybrid coating” Chem. World., Nov , 2006
A.S. Khanna , Santosh Kumar “Powder coating” Chem. World., Nov, 2005
A.S. Khanna , Santosh Kumar “Nano coating: Coating for future” Chem.World., July, 2005
Presented Technical paper on “Effect of contaminants on the durability of various coating
systems” in SSPC-2005,Inter Continental, Mumbai.
 Presented Technical paper on “evolution of Underwater Coating System” at COMME-2008
 Presented Technical paper on “Polyurea: “An advance technology” in SSPC-2006 , Mumbai..



MAIN COURSE CONTENT (M.TECH):
High temperature corrosion, Aqueous Corrosion, Coating systems for substrate protection.
High temperature materials, Cathodic Protection, Industrial Corrosion, Powder Metallurgy, Composite materials (including FRP).
Used polarization and Horizontal & Vertical Gravimetric techniques (Study aqueous and High Temp Corrosion), Electrical Impedance Spectroscopy, Cathodic Disbondment, Various Coating related Chemical and Physical testing , Well Versed with various Corrosion and Coatings ASTM Satndards, Failure analysis of substrate through SEM, TEM, X-Ray Diffraction, Electrochemistry.


PROJECTS AND SEMINARS:
Projects:
“Effect of contaminants on the performance of different coating systems” in collaboration with Asian paints (I) ltd, Mumbai.
“Role of volatile corrosion inhibitors in metal protection” in collaboration with Wellpack Enterprises, Mumbai.
Seminars:
“Effect of vapor phase inhibitors in packaging industries.”

SEMINARS / CONFERENCES/WORKSHOPS:
Volunteered and participated in conference such as “Society for Surface Protective Coating “(Nov 2003,Oct.2004,Nov 2005) “Indian paint Association” (Jan 2005) and represented SSPC at CII meet at Nasik (Jun, 2005).
Actively associated with E- Cell (Entrepreneurs Cell) club of IIT Bombay and other activities like UNNATI related to upliftment of poor children.

SCHOLASTIC ACHIEVEMENTS:
Cleared Net exam conducted by Council of Scientific & Industrial Research, Govt.of India in June 2003.
Awarded By Canara Bank for Academic Excellence-1994.
GATE (2003): All India rank-218.
CAT (2005): Above 98 percentile.

EXTRA-CURRICULAR ACTIVITIES:
Participated and won prizes in debates, essay writing, plays/dramatics at school and college level.
Played active role in organizing events like Mood Indigo, Chemophilian and other workshops.
Actively participated in script writing (awarded 1st prize in PAF-2004).

LEADERSHIP SKILLS:
Placement representative of Corrosion science and engineering department, IIT Bombay, 2004-2005.
Class representative during graduation (1997-2000), University of Delhi.

COMPUTER KNOWLEDGE:
Done basics of computer at graduation level and learnt BASIC language at post graduation level.
Familiar with operating systems like Windows® and Linux.

PERSONAL PROFILE:
Date of Birth : 08-09-1980
Father’s Name : Mr. K. D. Narayan Singh
Sex : Male
Nationality : Indian
Postal Address : C/O:-Anil Kumar, Hostel-1,Room-297. IIT Bombay-400076

REFERENCE: Prof.A.S.Khanna, Corrosion Science& Engg. Department, Indian Institute of Technology, BOMBAY-400076,Tel:-022-25767891.
::July 11, 2008::Aug 11, 2008::2454690::chinki::1::0::0 2084::Peter Aiku::4 Odiong street, Afaha-Uqua Rd::Eket, Akwa-Ibom state, Nigeria::ak::23400::234-8035527939::paaiku@yahoo.com::Certified or Licensed::http://::Coating/Corrosin Engineer ::Coating/Corrosion Engineer::Graduated in 1992 with Bachelor of Science (B. Sc) in Chemical Engineering from University of Lagos, I have acquired wide range of experience through field works, technical studies and courses.

These experiences involve judgment of sound engineering practice in Project management, Coating/Painting, NDT Inspection in various environments and fields; pipeline, structures, offshore/onshore and tank farm. My experiences are at hand-on and supervisory level. My comprehensive experience and flexibility would enable me to work as a team member, leader or as an individual when required.
EDUCATION
1987 – 1992 University of Lagos, Lagos State.
Bachelor of Science in Chemical Engineering (1992)
NACE Coating Inspector Level 1 - Certified
NACE Coating Inspector Level 2 - Certified
NACE Corrosion Technician Certification
NACE Corrosion Technologist Certification
PROFESSIONAL MEMBERSHIPS
National Association of Corrosion Engineers (NACE)
American Society for Quality (ASQ)
WORK EXPERIENCE
Feb ’08 – Present Deepdrill Oilfilled Services Overseas Limited
Coating Inspector – EPC4A Platforms Retrofit & Wellhead Tie-ins. Exxonmobil Development Company.
Coating Inspector for Exxonmobil EAP EPC 4A comprises of the following structures, Idoho BZ-BP Flare Bridge, Idoho BZ Flare boom, riser platform & jacket, Ubit GY-GM flare bridge, Ubit GM-GZ flare bridge, Ubit GM riser platform, jacket & flare boom, Ubit GZ flare jacket & platform.
Responsibility includes
• Performing coating quality inspection activities in accordance with the Painting GPL 13-00-09 & TSA GPL 29-02-07 Sub-Project Quality Plan.
• Keep the Site Quality Lead updated with status of coating quality issues.
• Perform witness inspections and monitor production processes.
• Review and evaluate Contractor’s records.
• Review Contractor’s and Suppliers’ completion files for accuracy and adequacy.
• Surface Preparations: Dry blasting with expendable blasting medium (Grit & Garnet) standards some of SSPC SP 5 or SP 10 of profiles ranging from 37µm corresponding to “Grade fine to medium” as measured by ISO 8503
• Coating systems: Thermal Spray Aluminum (TSA) Ameron & International paints of various generic and coating levels (two, three and four coating systems)
• Test and Inspection. The tests carried out are as follows:
• Qualification of Paint operator in accordance with WCP and Coating Procedure Test performed for all the coating systems and TSA
• Environmental conditions; AT, ST, RH & DP
• 100% visual examination, before & after blasting, and painting to check for contaminations, solvent retention, runs, sag and other defects.
• Roughness; SSPC-SP5 (TSA) and SSPC-SP10 (Atmospheric surfaces)
• Cleanliness: to conform with SSPC VIS 1 or ISO 8501 & ISO 8502-3.
• Salt test to conform with ISO 8502-6 & ISO 8502-9
• Adhesion test using ISO 4624 as standard minimum 5MPa (Epoxy), 3MPa (Zn primed) & 7MPa (TSA)
Mar ’06 – Jan ’08 Linkso Nigeria Limited.
Project Engineer (Coating/corrosion) – West African Gas Pipeline Project.
Coating Inspection for West Africa Gas Pipeline project, a sub-regional project to supply gas from Lagos, Nigeria to Tema/Takoradi, Ghana with landfall spurs at Cotonou (Benin) and Lome (Togo) of different terrain onshore/offshore, swamp and dry land. Responsibilities includes:
 Pipe receiving/Loading and stringing of FBE and concrete coated 5Lx70 PSL-2E pipes.
 Cold bending of pipe to specification and appropriate standard;
 Surface preparation to NACE NO.2/SSPC-SP-10;
 Mainline Coating (shrink sleeve) of field joints applied in accordance with the manufacturer's recommendations, WAGP specifications and standard;
 Effectively monitor the repair of fusion bonded epoxy (FBE) coating on line pipe and bends;
 Holiday testing to ASTM-D5162,Adhesion testing to ISO 4624 2409 & 4624 and project specifications
 Effectively monitor that pipes are properly strings, lowered and laid in a safe and controlled manner to eliminate the possibilities of damage to the pipe or coating.
 Installation of Anodes for Cathodic Protection (CP);
 954m 20” Horizontal Directional Drilling (HDD) final inspections before pulling;
 Concrete weight coating (CWC) of line pipe in Cotonou, Benin republic;
 Procedure Qualification Test (PQT) for CWC “Mould Technique”
 Pre-production tests: slump test, Concrete mix design, concrete compressive strength,
 Trial production on 10” and 8” pipes
 Periodic reporting; weekly, daily and monthly for management.
‘03- Mar ‘06 OCEANEERING (SOLUS SHALL) LTD Port-Harcourt, Nigeria
QC Administrator - Mobil Producing Nigeria Unlimited.
Employed as the QC Database Administrator for the Corrosion Condition Monitoring (CCM) of Mobil fields, the QIT tank farm, BRT and offshore platforms, reporting to Project manager. The responsibilities are:
• Managing the Mechanical integrity (UT) data gathering and acquisition of all offshore platforms and onshore facilities.
• Preparing, reviewing and submitting inspection (Visual and NDT) reports, to the client; electronically and manual documentation.
• Implementation of risk based Inspection strategy.
• Input of data into Win-CAIRS (Computer Aided Inspection Reporting Systems.)

 Sep. ‘98 – May 2003 CEPHWELL RESOURCES LIMITED, Eket, Nigeria
Project Engineer (Painting/Coating)
Project: 7# of Helidecks Paint Coating Maintenance projects for Mobil Producing Nigeria.
Project: External Paint Coating of QIT Relief Tank 103 and Accessories.
• Calculation of surface areas of structures and piping (using isometric drawings) materials for estimation of abrasives grits quantities to be used for blasting operations and estimate of paint and thinner quantities to be used in painting.
• Identification and marking of painted spools and fittings using Isometric drawings.
• Responsible for tracking of weather conditions suitable for blasting and painting operations (Relative humidity, Air temperature, Steel surface temperature and Dew points).
• Inspection of blasted surface to ensure it’s conformance with the clients specification SSPC-SP-10,for application of primer.
• Application of paints (3 coats) system.
• Responsible for proper conformances with service identification colour codes and banding of structures, spools and equipment.
• Inspection of coated surface for holidays using the holiday detector and taking of Coating thickness as specified by client.
• Monitoring of cathodically protected structures and piping items.
• Responsible for proper conformances with client procedure for Grit blasting and painting.
• Preparations of daily/weekly coating report to the Client project engineer.
• Documentation of daily report for onward submission to Clients reps.
Dec ’93 – Aug ‘98 OCEANEERING (SOLUS SHALL) LTD Port-Harcourt, Nigeria
QA Inspector - ExxonMobil EKET
See above

ADDITIONAL SKILL
• Proficiency in computer applications of Microsoft office, Lotus application, AutoCAD, MS Projects and WINCAIRS
• Ability to use coating inspections equipments including Sling Psychrometer & wet tables, WFT and DFT gauges, Low & High voltage holiday detector, Adhesion, Salt, Dust test. Comprehend and use surface preparations standard (NACE, SSPC and ISO) to attain specified surface cleanness. ::July 7, 2008::Oct 8, 2008::2454748::funmilayo::0::0::0 2083::Madhu.K::P.O.Box-270 ADCO-BAB::Abu Dhabi::AD::270::+971508206801::madhusudanan_k@hotmail.com::Engineering&&Inspection&&Field Work::http://::Position Desired: Corrosion/CP Supervisor ::Corrosion technologist & CP level - II::NACE-USA Certified Corrosion Technologist/CP Level-ll by profession.

I'm associated with Corrosion Monitoring & Control + Cathodic Protection Technology Services since 1994,serving the Oil & Gas industries in Middle East, Gulf and India.

My expertise includes,

► Corrosion Engineering practices for Onshore Pipelines, Well Casings, Piles, Tanks and Process Plants.
► Execution of Cathodic Protection Projects in the Oil & Gas Sector.
► Design and Detailed Engineering for Cathodic Protection Systems.
► Hands on experience with CP Survey, Installation, Testing & Commissioning.
► Hands on experience with Investigative assessment, Trouble shooting & Rehabilitation for CP Systems.
► Hands on experience with Painting Coating, Lining, Inspection & Quality Control.
► Hands on experience with Corrosion Coupon retrieving, analysis.
► IPS anomaly verifications and remedial action

Applied for any open position related to Corrosion / Cathodic Protection / Painting, Coating works.
::July 2, 2008::Oct 3, 2008::2454743::ambemapen::0::0::0 2082::Javed Bashir::Abdulkrim Holding Co.::Khobar::03::4909::00966530124706::javed.brf@hotmail.co.uk::Engineering::http://::Corrosion/Cathodic Protection ::Corrosion/Cathodic Protection:: Please ask for detail CV
Professional Qualification:

Member of National Association of Corrosion Engineers, (NACE)
Member of Technical Group (TG) on NACE FORUM
Member of the Institute of Corrosion, (MI Corr.).
Approved for CP level 3

Employment History:

Present Job:
TYCO THERMAL CONTROLS, Cathodic Protection division.
From 10 Sep, 2007.
Al-Abdulkarim Holding Co. P.O. Box 4909,Khobar, KSA.

Position: Consultant Project Manager for Middle East.
Presently deputed in Saudi Arabia.

Responsibilities: Project management including materials procurement, installation, testing commissioning.
Marketing, business development.

1. DODSAL ENGINEERING AND CONSTRUCTION PTE. LTD.
P.O. Box- 8034,Dubai- UAE.
From 8th July, 2006 to 27th Aug, 2007

Company Profile:

Dodsal is one of the up-growing EPC Company, which is famous for multi-million USD Oil & Gas, commercial building, construction projects in the Middle East & Africa.

Position: Project Lead Engineer Cathodic Protection System.

Project: EPC of Ras Laffan Common Cooling Seawater System, Phase-II, Qatar Petroleum, Qatar.

Introduction: Ras Laffan Common Cooling Seawater system Phase II is a development undertaken by Qatar Petroleum (QP) for providing cooling water supply to rapidly growing mega industries at Ras Laffan industrial city of Qatar.

This project is one of the biggest Concrete Cathodic Protection projects of the Middle East, Where each and every piece of concrete is cathodically protected by means of MMO Ribbon Mesh Anodes, a huge quantities of Eltech200 mesh anode, Titanium Conductor Bar, MMO tubular canister anodes, MMO wire canister anodes, Ag/Ag Cl for water & concrete application, Prepackage Cu/Cuso4 Reference Electrodes, Huge quantities of different size with different colour code of cables, million of plastic rebar’s clips and different types sizes of junction boxes etc. 100% Remote monitoring & control system, huge numbers of Digital SMPS multi channels power supplies modules & Oil cooled Transformer Rectifiers for
Protection of Piles of pipe supports.


2. ABDULLA FOUAD IMPALLOY LIMITED COMPANY,
Cathodic Protection Specialized Company
P.O. BOX-257,Dammam, KSA.
Company Profile:
Abdulla Fouad-Impalloy is a Cathodic Protection system specialist company of Saudi Arabia. AFIC one of the most popular, reputed, known, biggest and old CP Company of Saudi Arabia.
There is a complete setup for manufacturing, assembling, testing of all types of CP equipments as per international standards and providing best engineering services and corrosion solution for all types of CP engineering designs, CP material, installations, testing and commissioning of Cathodic protection systems.

Position: Project Coordinator / Project Manager.

From 14 July, 1994 to 27 June, 2006:

(Some of the Projects are being listed)
• Maintenance Contract with Saudi consolidated electrical company (SCECO) for Ghazlan power plant, the project includes the following activities: to perform monitoring, preventive and corrective maintenance of CP system, the system including 25 oil cooled “Good All” old Transformer rectifiers, 145 TA-4 high silicon cast iron anodes distributed along the utility pipelines and 150 flush fink test and bonding stations and 8 fire water and fuel tanks, under tank bottoms and internal protected by ICCP system. The TA-4 anodes distributed around the periphery of each tank. Maintenance and overhauling of transformer rectifiers, dielectric strength test of TR oil etc and finally testing and commission the system.
• The Project with Yanbu, NIGC/SABIC, includes Installation, Installation supervision, testing commissioning and commissioning report for reinforcement of concrete for seawater intake pit, utility pipelines, there is concrete CP protected by impressed current and utility Pipelines protected by sacrificial system.
• SADAF/SABIC, Styrene plant, Jubail for Daelim Arabia: Bid preparation & detail design engineering under supervision of engineering manager. Installation supervision, testing and commissioning for M.M.O. grid anode system and VIP / auto potential controlled type TR 10 nos. for under tank bottoms and sacrificial CP system for utility pipelines.
::June 30, 2008::Oct 1, 2008::2454741::7064786::0::0::0 2081::charles allen::1701 121st SE D103::everett::WA::98208::206-423-8405::charles.allen01@gmail.com::Certified or Licensed&&Field Work::http://::Position Desired: Corrosion Technician ::CP 2 looking to relocate::1701 121 St. SE D103
Everett, WA 98208 Phone (425) 225-5185
Cell (206) 423-8405
Email charles.allen01@gmail.com
Charles Allen


Objective

Dedicated, hard-worker seeking testing or construction job in corrosion industry (willing to travel and relocate).


Education

NACE CP 2 Feb 2008
NACE CP 1 Feb 2007
UST (Underground Storage Tanks) WA Dec 06
Aug 04-May 05 Kilgore Community College Kilgore, TX
Corrosion Technology Certificate
Jan 02-Dec 02 Kilgore Community College Kilgore, TX
HVAC (Heating, Venting, Air Conditioning) License
EPA Certified

Work experience

Feb 06-Present Corrpro Company, Inc. Seattle, WA

Install CP systems for UST/AST. Maintain 60 day and 3 year surveys for UST/AST. Install and commission new deep well anode bed and galvanic systems. Installed semi deep wells and surveyed in and around compressor stations. Installed CP systems in and around marina. Completed OQ training for access into military and nuclear facilities. Surveyed Puget Sound Energy distribution mains and services. Data processed all readings of impressed current, galvanic, and isolated systems using Microsoft Excel and Word. Communicated directly to PSE technicians. Drove company vehicle over 100,000 miles accident/ticket free.

Sept 05-Feb 06 Total Corrosion Houston, TX

Completed annual surveys. Data processed using Microsoft Excel and Word. Supervised the drilling of holes for anode beds and installed anode beds. Supervised tie ends of rectifiers and anode beds. Trouble shot and installed oil and universal rectifiers. Completed OQ/safety training to gain access to oil refineries, pipeline right-of-ways, and international trade zones. Drove over 10,000 miles in company vehicle accident/ticket free.

May 05-Sept 05 Center Point Energy Shreveport, LA

Aided in CIS, ACVG, and DCVG surveys with MC Miller equipment. Located pipelines by using both transmitter/receiver. Assisted in Pipeline Current Mapper. Trouble shot rectifiers. Installed interrupters. Drove company vehicles over 25,000 miles accident/ticket free.

::June 23, 2008::July 24, 2008::2454672::Ca033080::0::0::0 2080::Steve Sparks::3218 Wardmont St::Houston::TX::77093::281-904-4534::gijoeman0075@yahoo.com::Management&&Certified or Licensed&&Inspection&&Field Work::http://::Position Desired: ::Inspector/Supervisor::STEVE SPARKS

EDUCATION:
1979-1981 Associate of Applied Science: USAF, Community College
1976-1979 Novi High School

TECHNICAL QUALIFICATIONS:

Certified: SSPC, C3 Lead Competent/Supervisor
Certified: NACE, Certified Coatings Inspector, level 3
Certified: Applicator Sherwin Williams Polyurea systems
Certified: Applicator Char tek 7 Fireproofing
Certified: Applicator PPG Pitt-Char Fireproofing
Certified: Applicator Carboline Pyrocrete 240/241
Certified: Applicator SPC Epoxy Coating systems
Certified: Shipyard Competent person
Certified: UHP (New Jet) repair and operation

Successfully completed the following courses
Introduction to Metallurgy and failure analysis
Supervisor training (Nichols State University 2004)
Rigging for offshore @ Louisiana Technical College
Devilbiss/ Ransburg 2K fluid metering system
Spider staging and Sky climber equipment.
JLG, Marklift, and Grove manlifts

OTHER:

Have completed the following computer classes,
Excel, Word, SAP, Sure track (primavera), SIS.
OSHA forklift
15-25 ton Cherry picker (Grove, Galion, Lorain, Dresser, )
Welding and fabrication
Blastrac & EBE Machines
Wheelabrator and Pangborne blast machines

Operate most heavy equipment
Many types hydro blasting rigs 10,000 – 40,000 psi
Sponge/soda blasting
Most plural component and specialty spray systems
Epoxy injection, Ameritech pump
Spray applied, foam insulation
.

EMPLOYMENT:

May 07 – current Tecon Services: Inspector
Insure all coating are being applied to specification and document all related information.

Mar 06 – May 07 Dunkin and Bush: Superintendent
Oversee application of specialty coating and supervise painting and blasting crews

Jun 05 - Mar 06 Midwest Coating: Supervisor
Apply and oversee application of specialty coating, with emphasis on wastewater treatment plants.

Dec 04 – May 05 Python Corp: Supervisor
Oversee application of high temp coating, sponge/sand blasting and epoxy injection and application of hydro active grout.

Mar 04 – Dec 04 Danos & Curole: Off Shore Coatings Superintendent
Duties included, but not limited to, hiring employees, purchasing equipment, inspection of and overseeing application of coatings, maintaining supplies and paint inventory and safety of workers.

Feb 03 – Feb 04 Basic Industries: Coating Superintendent/Scheduling and planning
Duties included, but not limited to organizing paint crews, scheduling work, developing time line for work completion, hiring employees, ordering equipment and supplies, attending production meetings, handling all phrases of coating related work on CUI project.

May 87 – Sep 89 Sipco Services: General foreman/ Site Supervisor
Feb 02 – Feb 03 Duties included daily paperwork relating to time keeping, billing, purchasing, and deliveries, supervision of sandblasting, painting, fireproofing crews on turnarounds/shutdowns. Oversee fireproofing crews.

Jan 00 – Feb 01 Shaw Global Energy Service: Project manager / Site Supervisor
Duties included, but not limited to, organizing and deploying work force to obtain maximum productivity. Insure that work is performed in a safe manner through enforcement of company policies. Hiring of employees, perform inspection of work and maintain records of it. Develop and maintain file system for records. Develop and maintain a yearly budget. Exercise operational and purchasing cost control. Maintain superior knowledge of coating specifications, painting practices and surface preparation.

Jun 99 – Jan 00 Technicoating, Scaffold and Insulation: Area Supervisor / Outside Sales
Responsibilities included outside sales and new business development and contacting potential new clients and maintain relationships we current clients. Also responsible for supervision of ongoing projects.

Jul 98 – Jun 99 CRC Evans: Field Technician.
Apr 93 – Dec 93 Duties included, design, fabrication, maintenance, and operation of CPCO coating machine for pipeline service, assist with demonstration for potential clients and oversee crew that assist with the operation of machine.

Dec 95 – Jul 98 DARR Equipment Co: Paint shop lead / Transmission repair specialist
Duties included, prep and painting of Caterpillar heavy equipment, oversee make ready personnel on night shift. Certified Transmission rebuild specialist, duties included estimates for repair, ordering parts and rebuilding of transmissions
Jan 94 - Dec 95 Uni Systems: Coatings General Foreman
Duties included, supervision of painting crews, ordering supplies and materials and tracking employee hours, maintaining equipment.
Aug 92 - Apr 93 Forrest Services: Field Superintendent
Duties included, oversee painting and sandblasting crews, Hydro blasting, maintenance of equipment, Timekeeping and safety related item. Reported directly to company President
Jan 92 - Aug 92 Piping Technology and Products: Paint shop/ Foam shop Supervisor
Duties included, Coatings recommendations prior to painting of products, Quality control of welding prior to paint application and wheelabrator operation, oversee the manufacture of foam cold shoes.
Sep 89 - Dec 91 Certified Coatings Co: Site Supervisor/ General Foreman/ Outside sales
Supervised numerous coatings projects with up to 60 employees throughout the United States, including Ameron maintenance painting programs.
Jun 84 - May 87 Texas Industrial Painting Co: Foreman
Participated and supervised painting crews and, tank linings, sandblasting, hydoblasting as well as fiberglass linings on numerous projects as well as DuPont painting program.
Aug 83 - Jun 84 Matcote/ International Paint: Tech Rep/ Paint Sales
Jan 81 – Jun 81 Duties included, Paint Sales, Technical consultations and instruction of epoxy systems
with Customers, maintain warehouse inventory, performed batch making at manufacturing facility.

Aug 77 - Aug 83 Non Corrosive Products Co: Foreman Last position held.
Painting and sandblasting, fiberglass work with Chopper gun and hand laid systems, numerous tank linings.


REFERENCES:
Available upon request
::June 18, 2008::Sept 19, 2008::2454729::airforce::1::0::0 2079::Michael Shilling::9650 grant ave::clare ::mi::48617::7144943101::michael.shilling@gmail.com::Field Work::http://::Position Desired: ::Corrosion Technician:: Michael J. Shilling
9650 Grant Ave
Clare, MI 48617
(714) 494-3101



Education
1996-1999 Clare High School
306 Schoolcrest St.
Clare, MI 48617

01/06 Took and passed NACE CP 2
(never mailed in for actual cert just have to fill out app)

Employment
7/99-3/00 Mears Engineering
4500 N. Mission Rd.
Rosebush, MI 48878
(989) 433-2191
Laborer in corrosion Survey Department
Close interval surveyor, locator, reader, and GPS snapper

10/00-2/01 Northern Dry Bulk
805 Industrial Dr.
Clare, MI 48617
(989) 386-2389
Material Handler
Ran grinders, and kept materials supplied, drive forklift

6/01-9/01 Letherer Truss Inc.
851 Industrial Ct.
Clare, MI 48617
(989) 386-4999
Assembler
Sorted lumber and made trusses

9/01-6/02 Mears Engineering
4500 N. Mission Rd.
Rosebush, MI 48878
(989) 433-2191
Crew Leader in corrosion Survey Department
Close interval surveyor, locator, reader, and GPS snapper,
DCVG Pipecamp reader, rectifier repair

7/02-12/02 Johnsens Fleet Service
200 Summit ave
Spruce Pine, NC 28777
828-765-0500
Medium and heavy truck mechanic
Light truck and car tune ups

6/02-2/04 Rudy’s Drywall
St. Johns, Michigan
Drywall Hanger

5/04-1/05 Delfield
Mt. Pleasant, Michigan
TIG welder on stainless steel
Restaurant equipment.

2/05-3/05 Rudy’s Drywall
St. Johns, Michigan
Drywall Hanger


3/05/-8/05 Allied Corrosion
Marrieta, Georgia
locater, CIS reader, DCVG


11/05-8/07 Corrpro Companies Inc.
13011 Florence Ave
Santa Fe Springs, CA 90670
CP Technician.
(full time corrosion technician contracted to BP Pipelines Los Angles since 01/06,I have also done USTsurveys, current requirement testing, soil res., commissioning, attenuation, and continuity testing on fridays for corrpro when not at BP )

References


Winford Wilson
Corrpro Compaines Inc.
Santa Fe Springs, CA
(714) 391-1594

Rory Gutchak
Mears Engineering
Rosebush, MI
(925) 963-4409

Robert Trujillo
Farwest Corrosion control
Gardena, CA
(818) 613-3857




::June 16, 2008::Sept 17, 2008::2454727::liberty::1::0::0 2078::Resume-roper vernon hvac::14641 Kenwood Ave::dolton::IL::60419::708 201 0051::VrRoper@aol.com::Management&&Miscellaneous::http://VrRoper@aol.com::hvac ::Building Maintenance::Vernon Roper
14641 Kenwood Ave. Dolton, IL 60419
Phone: 708-201-0051
VrRoper@aol.com

Objective ENTRY LEVEL HVAC TECHNICIAN
A position where my education, skills and experience in the HVAC industry will be utilized

Experience Hands-on training in HVAC fundamentals, system troubleshooting, repair and maintenance of air conditioning, heating systems, and electronics

. Experience with basic air distribution systems, chimneys, vents and flues, hand and power tools, basic electricity, brazing and soldering, blueprints, copper and plastic piping principles and ferrous metal piping

. EPA 608 Certified

. 10 hours OSHA certified

. 410A Certified

Employment General Realty Building Co. – Chicago, IL 01/2001-2/2008
Property Maintenance
. Maintain building maintenance and construction

Park Manor Church – Chicago, IL 07/2000-03/2006
Building Maintenance
. In house building maintenance and construction
. Electrical, Plumbing and Remodeling

R.C.N. – Pen Plaza, NY 01/1999-12/2000
Telecommunication Technician
. Installed and repaired cable and telephone
. Work with co-axcle cable; drop lines, computer modems, TV/VCR and surround
Sound

Profile I work well alone and as a team player. I am a very hands-on worker. I am very eager to start a new career in the HVAC industry where I can utilize my learned skills and continue to advance and grow.

Education ConTech Institute- Columbus, IN 03/2008
HVAC Technical Training
Certification of Completion
10 hour OSHA Certification
EPA 608 Universal

Quality Business Institute – Long Island, NY 1999
630 Hour Certificate in Telecommunications / Electronics

NYS Law Library – Ulster County, NY 1994
Certified Legal Researcher

Mercy College – Dobbs Ferry, NY 1984
Liberal Arts Concentration

References available upon request
::June 2, 2008::Sept 3, 2008::2454713::sunday::1::0::0 2077::Dr. Peter C. Okafor::Department of Pure and Applied Chemistry, University of Calabar::Calabar, Nigeria::CR::451114::+234-803-429-5604; +86-158-0245-2809 (till Dec., 2008)::pcokafor@chemist.com::Research::http://::Position Desired: Research Corrosion Scientist ::Resume of Dr. Peter C. Okafor::Date of birth: 17 November, 1970
Nationality: Nigerian

Research and Professional
Education
Ph.D. University of Calabar, Calabar, Nigeria, Physical (Corrosion) Chemistry, May 2005
M.Sc. University of Calabar, Calabar, Nigeria, Physical (Corrosion) Chemistry, June, 2000
B.Sc. University of Calabar, Calabar, Nigeria, Chemistry, November, 1995 (with honours)

Professional Experience
1. Department of Pure and Applied Chemistry, University of Calabar, Calabar, Nigeria
Lecturer II, July 2005 – till date (on research leave)
Research Assistant (Ph.D. candidate) (to Prof. U. J. Ekpe) Sept. 2001 – Dec. 2004
Research Assistant (M.Sc. candidate) (to Prof. U. J. Ekpe) Jan. 1997 – Dec. 1998

2. State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016,Liaoning Province, China
Postdoctoral Research Fellow, May 2008 – till date

3. Institute for Corrosion and Multiphase Flow Technology, Department of Chemical Engineering, Ohio University, Athens, Ohio, U. S. A., 45701
Visiting Researcher (Fulbright Scholar), 22 August 2003 – 15 June 2004

4. National Youth Service Corp (NYSC)
Science Based Subjects Instructor (NYSC Member)
(Deployed to Esie/Illudun Anglican Grammar School, Esie, Kwara State, Nigeria)
November 1995 – November 1996

Professional Membership
Member: Chemical Society of Nigeria (CSN) September 2001 till date
Member: Institute of Chartered Chemist of Nigeria (ICCON) November 2007 till date

Awards/Honours
1. CAS (Chinese Academy of Sciences) – TWAS (Academy of Sciences for the Developing World) Postdoctoral Fellowship 2008 – 2009.
2. Fulbright J. S. Fellowship. (United State Department of States) 2003 – 2004.

Theses and Publications
Research effort is focused on understanding the mechanism, inhibition and modelling of corrosion processes and environmental pollution as it relates to atmospheric corrosion.

A. Thesis
1. P. C. Okafor (2004). Investigation and Modelling of CO2 Corrosion of Carbon Steel in the Presence of Acetic Acid. Ph.D. Thesis. Department of Pure and Applied Chemistry, University of Calabar, Calabar, Nigeria.

2. P. C. Okafor (1998). Corrosion Inhibition of Aluminium by 2-acetyl pyridine 4-phenyl Thiosemicarbazone Derivatives in Acidic Medium. M.Sc. Thesis. Department of Pure and Applied Chemistry, University of Calabar, Calabar, Nigeria.

3. P. C. Okafor (1995). The Effect of Fluorescent Light on the Physico-chemical Properties of Soybean/Palm Kernel Oil and Soybean/Groundnut Oil Blends. B.Sc. Project. Department of Chemistry, University of Calabar, Calabar, Nigeria.

B Scientific Publications

Number of publications: Over 20

List of recent publications (in Refereed Journals)
1. P. C. Okafor, M. E. Ikpi, I. E. Uwah, E. E. Ebenso, U. J. Ekpe and S. A. Umoren (2008). Inhibitory action of Phyllanthus amarus extracts on the corrosion of mild steel in acidic media. Corrosion Science, in press, (doi: 10.1016/j.corsci.2008.05.009)

2. P. C. Okafor, E. E. Oguzie, G. E. Iniama, M. E. Ikpi and U. J. Ekpe (2008). Corrosion inhibition properties of thiosemicarbazone and semicarbazone derivatives in concentrated acid environment. Global Journal of Pure and Applied Sciences, 14(1): 89 - 95.

3. P. C. Okafor and S. Nesic. (2007). Effect of Acetic acid on CO2 Localized Corrosion of Carbon Steel in Vapor-Water Two-Phase Horizontal Flow. Chemical Engineering Communications, 194(2); 141 - 157.

4. P. C. Okafor and E. E. Ebenso (2007). Inhibitory action of Carica papaya extracts on the corrosion of mild steel in acidic media and their adsorption characteristics. Pigment and Resin Technology, 36(3). 134 - 140.

5. P. C. Okafor, V. I. Osabor, E. E. Ebenso (2007). Eco friendly corrosion inhibitor: Inhibitive action of ethanol extracts of Garcinia kola for the corrosion of mild steel in H2SO4 solutions. Pigment and Resin Technology, 35(5), 299 - 305.

6. S. A. Umoren, O. Ogbobe, P. C. Okafor and E. E. Ebenso (2007). Polyethene glycol and polyvinyl alcohol as corrosion inhibitors for aluminium in acidic medium. Journal of Applied Polymer Science, 105,3363 - 3370.

7. S. A. Umoren, E. E. Ebenso, P. C. Okafor, U. J. Ekpe and O. Ogbobe (2007). Effect of halide ions on the corrosion inhibition of aluminium in alkaline medium using polyvinyl alcohol. Journal of Applied Polymer Science, 103(5), 2810 - 2816.

C. Conference Proceedings and Technical Papers
1. P. C. Okafor and S. Nesic. (2004). Effect of Acetic acid on CO2 Localized Corrosion of Carbon Steel in Vapor-Water Two-Phase Horizontal Flow. Presented at the American Institute of Chemical Engineers (AIChE) 2004 Annual Meeting (November, 2004).

2. P. C. Okafor (2004). CO2/Acetic acid Corrosion Electrochemistry. Institute for Corrosion and Multiphase Flow Tech., Ohio University, March 2004 Board Meeting.

Number of Undergraduate Students Final Research Projects Supervised: over 30

Professional Services
A University of Calabar Consultancy Services (UNICALCONS)
1. Assistant Consultant : ExxonMobil Credential Verification Project
September 2002 – August 2003

B Department of Pure and Applied Chemistry
1. Time Table Officer September 2007 – May, 2008
2. Academic Adviser (Year 2) November 2006 – May, 2008
3. Industrial Training Coordinator November 2005 – May, 2008
4. Field/Industrial Trip Coordinator November 2005 – May, 2008
5. Research Project Coordinator November 2005 – November 2006

C Others
1. Reviewer: Global Journal of Pure and Applied Sciences (University of Calabar, Calabar, Nigeria), 2007 till date
2. Reviewer: Pigment and Resin Technology (Emerald Group Publishing Limited, UK), 2007 till date
3. Member: Local 5th Fulbright Alumni Association of Nigeria (FAAN) National Conference Organizing Committee (Calabar, 2004)

Referees
Professor U. J. Ekpe
Department of Pure and Applied Chemistry
University of Calabar
Calabar, Nigeria
Email: ujekpe@yahoo.com
Tel.: +234-(0)803-711-4983

Professor U. J. Ibok
Department of Pure and Applied Chemistry
University of Calabar
Calabar, Nigeria
Tel.: +234-(0)803-405-8032

Doctor E. E. Ebenso
Department of Pure and Applied Chemistry
University of Calabar
Calabar, Nigeria
Email: eno_ebenso@yahoo.com
Tel.: +234-(0)803-541-6747; +2665-814-6440 (current-Lesotho)

::June 2, 2008::Sept 3, 2008::2454713::nov170::1::0::0 2076::John Furstenberg::POBox 64 Ormond ::Australia::ca::3204::+61413201559::fursten@optushome.com.au::Sales&&Management&&Engineering::http://::Position Desired: ::CP Project Manager::I have 30 years of experience in Ownership and management of Cathodic Protection Companies , I am available for project Management services in most areas of cathodic protection .

I am available for managing specific Projects world wide.

My experience also alows me to manage CP companies or divisions for which may require strengthening. Currently I live in Australia but am available to travel worldwide.
::May 28, 2008::June 28, 2008::2454646::dalia1::0::0::0 2075::Awdhesh Pratap Mall::A-40,Shankheswar Society,ONGC Colony,Makarpura Road ::Baroda,Gujarat,India::91::390009::+912652655947::awdhesh_mall@yahoo.com::Engineering&&Inspection&&Field Work::http://:: Corrosion/Cathodic ProtectionTehnician ::Cathodic Protection::TECHNICAL SKILLS SUMMARY:
1,15 Years extensive experience in the cathodic industry.

2Handling independently turnkey project in the field of cathodic protection of underground structure.
3Designing sacrificial and impressed current cathodic protection system for pipeline.
4Project planning , feasibility surveys, manpower management, material managements, cost analysis and control & decision techniques
5Testing and commissioning of cathodic protection system. Identification of interference source and mitigation measure such as AC and DC mitigation.
6Trouble shooting in the system, monitoring and maintenance of cathodic protection for all the structures such as onshore pipeline, internal and external Tank, Vessel, Bullets, Well casing.
7Investigation, recommendation and implement of same, revamping of CP System.
8As built drawing and documentation preparation.
9Exposure to quality assurance and control system.
10CIPS &DCVG survey on onshore pipeline.

PERSONAL PROFILE

Name : Awdhesh Pratap Mall
Date of Birth : 2nd January1968
Passport No. : F-4004708
Nationality : Indian
Permanent Address : A-40,Shankheshwar society,
O.N.G.C Colony
Makarpura Road,
Baroda-390009
Gujarat, India.
Email : awdhesh_mall@yahoo.com
Phone no- : +912652655947 India (Home)

Present Location : OIL& GAS Field PDO Marmul, Oman
Contact details : Mobile +968 99323805 (Work place)


EDUCATION
1 Iinter College (Science) - 1984,UP.E.Board. UP, INDIA
2 Diploma in Electronics Engineering – 1991,UP.T.E.Board, UP, INDIA
MEMBERSHIP/ CERTIFICATION

ACTIVE Nace member (National Association of Corrosion Engineers, USA)
1Membership no-115345
2NACE Certified CP Level-2 ( Cathodic Protection Technician)
3NACE Corrosion Technologists certification in progress.

TRAINING IN SAFETY

1.Basic First Aid Training by PDO Oman & British Petroleum
2.H2S Awareness & Escape, NTI(PDO Oman)
3.HSE Training by British Petroleum, Georgia and Azerbaijan
4.JHA Training by NTI (PDO Oman)
5.GAS Tester Authorization.
6Permit Holder Authorization: BP Georgia & Azerbaijan and PDO Oman,
7.Permit Applicant Authorization :BP Georgia & Azerbaijan and PDO Oman
COMPUTURE PROFICIENCY

1.Operating and working knowledge of software package of MS Word, MS Excel, and MS power point.
2.Well conversant with various manufacturer’s software of pipeline integrity survey instrument.
3.Internet skills

PERSONAL STRENGTHS

1.Teamwork and leaderships quality.
2.Strong Analytical skills, proven ability to quickly and apply knowledge and common sense effectively and successfully.
3.Strong education back ground in Electrical and Electronic Engineering.
4.Strong written and communication skills.

PROFESSIONAL EXPERIENCE
1.0 DECEMBER 2003 ONWARDS: Amran Cathodic Protection System & Services LLC, Oman
Engineer (Cathodic Protection) -
Responsibilities:
1. Preparation of the detail report, material/equipment specifications, bill of quantities and preparation of execution drawings. Interaction with client/consultant for approval of the documents.
2.Conduct Site Surveys.
3.Monitoring progress of site activities, interaction with sub contractor for resource/manpower mobilisation for execution of the project as per schedule.
4.Supervision of the erection, testing and commissioning, data interpenetration. Interaction with client/consultant for project handover.
5.Investigation, recommendation and up gradation of existing CP System for onshore pipelines, Plants, Tanks and Vessels, well casing.
6.CIPS &DCVG report preparation and data evaluation.

2.0JANUARY 2001 –FEBRUARY 2002: M/S Pens pen International Limited, Abu Dhabi,
Surveyor (CIPL/ DCVG) -
Responsibilities:
1.CIPS & DCVG Survey of on shore pipeline.
2.Preparation of reports and data interpretretation,
3.SEPTEMBER1992 –February 2001& 2002-DECEMBER 2003: - Corrtech International Ltd, Ahmedabad, India, Engineer(Cathodic Protection )

Joined as a CP Technician and I rose gradually and steadily to various positions viz. project supervisor and Project CP Engineer.
Responsibilities:
1.Site Survey Installation
2.Testing and Commissioning
3.Post Commissioning, Monitoring & Maintenance Services of ICCP and Sacrificial CP System
4.Mitigation of interference caused by HVDC Railway and foreign underground structures
5.CIPS, CAT and DCVG Surveys, Pearson Surveys.
6.Preparation of installation procedure, price break up and billing, approval from client
7.Liaison with various authorities (i.e. Foreign pipeline crossing, Railways, Ministry of Electricity’s Boards, Municipal corporations, and other authorities to carry out project work
8.Co-ordination with client/consultant/contractors
9.Preparations of documents and contract closing activities

3.0 Maintenance Supervisor - Advance Electronics Systems Baroda, India 1992- 1993
Responsibilities:
1.0Testing and Maintenance of cathodic protection unit.

4.0Testing Supervisor - Indian Telephone Industries Ltd, Allahabad, India 1991- 1992
Responsibilities:
1.Testing of telephone accessories like Transmitters, Receivers and radio frequency amplifier .filter etc.

::May 22, 2008::Aug 23, 2008::2454702::pratap123::0::0::0 2074::Geoffrey Raoul Noumbissi::1001 south martin street ::kilgore::tx::75662::903-241-8957::nsraoul10@hotmail.com::Certified or Licensed::http://::Corrosion technician ::Corrosion Technician.::

Education
Kilgore College, Kilgore, Texas
• Associate of Applied Science, Corrosion Tech
• Cathodic Protection Level 1 Certification
• Phi Theta Kappa
• Who’s Who Among College Students
• National Scholar Honor Society
• 3.84 GPA
• Certificate of Applied Science, Corrosion Tech

Computer Skills
• Microsoft Word®
• Microsoft PowerPoint®
• Microsoft Excel®

Languages
• English (fluent)
• French (fluent)

References

Jerome Edinger, Corrosion Technology Instructor
Phone: (903) 983-8165,Fax: (903)9848175,jedinger@kilgore.edu

Mary Stephens, Administrative Assistant, Kilgore College, 1100 Broadway Kilgore,
TX 75662,(903)-983-8683,mstephens@kilgore.edu

::May 22, 2008::July 23, 2008::2454671::kilgore::1::0::0 2073::Nair KG::162, Krishnan Koil Street, Ramanathapuram,::Coimbatore::TN::641045::91-9921073956::cptechnology@indiamail.com::Management&&Engineering&&Certified or Licensed&&Inspection&&Field Work::http://::Available for Services ::Indian Cathodic Protection Personal::NACE Certified Senior Corrosion Technologist, with having over nineteen years work experience in Cathodic Protection Technology PRE-DESIGN SURVEYS, DETAILED ENGINEERING, INSTALLATIONS, TESTING, COMMISSIONING, POST COMMISSIONING SURVEYS, MONITORING & MAINTENANCE, INVESTIGATION & TROUBLE SHOOTING etc., and involved with Cross Country Pipelines, AGST (internal & external), Plant Structures and Reinforcement in Cement Concrete etc. ::May 8, 2008::June 8, 2008::2454626::proprietor::0::0::0 2072::abdul::brusselsestraat 165/F181::3000 Leuven::--::---::+32 478247391::raufbe@yahoo.com::Sales&&Management&&Office&&Manufacturing&&Engineering&&Research&&Field Work&&Miscellaneous::http://::Position Desired: ::Corrosion engineer:: DETAIL

• Name: RAUF
• First name: Abdul
• Address: Brusselsestraat 165/F181-3000 Leuven
• Nationality: Pakistani
• Marital status: married
• Contact details:
Tel.: +32(0)478.247.391
E-mail: raufbe@yahoo.com
• Birthdate and place: 14/2/1973,Gujranwala


OBJECTIVE

As a researcher in the field of electrochemical measurements in Leuven University, I have gained technical knowledge and experience. I will gladly implement these skills and knowledge in an economic way to contribute in the success of your group.

EDUCATION (reversed chronologically)

2003-2008
• Researcher - Department of metallurgy and materials sciences – KUL, Leuven
Subject: Detection of localized corrosion with the help of EFM
(Electrochemical frequency modulation) technique.

2001-2002
• Master in chemical engineering – KUL
Thesis: Design of an experimental set-up for study of heat transfer in
mixing vessels

1994-1998
• Bachelor in chemical engineering – UET Lahore
Thesis: Design of ethyl benzene plant
Mini project: Pollution from automobile sources in Lahore

PROFESSIONAL EXPERIENCE (chronologically)

2003-2008
• Katholieke Universiteit Leuven (Leuven, Belgium).
Research in corrosion lab of KUL, Leuven
Every year arranged practical sessions to engineering students
• Tested new software
Comparison between new Gamry software and the existing set-up for
EFM technique on November 29,2003.
• Advisor for student thesis
Detection of localized corrosion phenomena with the help of
Electrochemical frequency modulation (EFM) technique
By Jan-Willem BURSSENS


2006-2007
• Katholieke Universiteit Leuven (Leuven, Belgium).
Department: Metallurgy and materials sciences
Project: A research project about green inhibitors for corrosion
Performed:
Short-term and long-term electrochemical measurements
Arranged meeting with other project members.
Prepared monthly project reports and delivered presentations

KNOWLEDGE OF LANGUAGES

Punjabi (mother language) ******
Nederlands ** Understanding
English ***** Daily using in conversations and studies


COMPUTER KNOWLEDGE

Internet, Outlook, PowerPoint, Word, Excel, MathCAD: daily professionally user.

SEMINARS delivered

KULeuven-August 2005 “a. Pitting detection by using the EFM technique”

KULeuven-September 2007 “b. Performance of green inhibitors”.


COURSES followed

• Thermodynamics of Materials and processes by Prof. Doug Swinbourne RMIT University Melbourne, Australia

• Labview introduction course at National instruments centre in Zaventum on 24.10.2003

• Introductie databanken universiteitsbibliotheek in het 2de semester van het academiejaar 2006-2007,on 06/03/2007.


POSTERS PRESENTED

• Critical pitting temperature can be measured using the EFM (Electrochemical Frequency Modulation) technique. (Presented in Nace2005)
A. Rauf and W. F. Bogaerts, KU Leuven; R. W. Bosch, SCK/CEN

• Online monitoring possibilities for distinguishing between crevice and pitting corrosion using the EFM technique (presented in Nace2007)
A. Rauf and W.F. Bogaerts


TRAVEL ASSISTANCE WON

• CORROSION 2005 (NACE International, HOUSTON, USA 03/04/2005-06/04/2005), received travel assistance in the amount of $550.00 US

• CORROSION 2007 (NACE International, NASHVILLE, USA 11/03/2007-14/03/2007), received travel assistance in the amount of $250.00 US.


PUBLICATIONS

• Pitting detection by using the Electrochemical Frequency Modulation (EFM) technique. Eurocorr 2005/Paper # 394
A. Rauf (KU-Leuven), R. W. Bosch (SCK•CEN) and W. F. Bogaerts (KU-Leuven)

• The response of EFM technique for different stainless steels, without and with preheat treatment, during pitting and the appropriate range for the amplitude of its perturbation signal. Eurocorr 2007/Paper #1186
A. Rauf and W. F. Bogaerts

• Implementation of the EFM (Electrochemical Frequency Modulation) technique for the detection of Stress Corrosion Cracking (SCC) Eurocorr 2007/Paper #1318
A. Rauf and W. F. Bogaerts


INTERESTS

Jogging, tennis, cricket and music


REFEREES

• Prof. Walter Bogaerts (Chairman Arenberg Library, KUL, Belgium) E-mail: walter.bogaerts@mtm.kuleuven.be

• Prof. Jan Degrève (Chemical engineering department, KUL, Belgium) E-mail: Jan.Degreve@CIT.kuleuven.be

::Apr 26, 2008::July 28, 2008::2454676::123123::1::0::0 2071::Kevin Sweeney::P.O. Box 11469::Casa Grande::AZ::85230::502-876-5274::sweeney_kj@cox.net::Certified or Licensed&&Inspection&&Field Work::http://::Position Desired: Corrosion Tech. ::Multi-capable worker seeking work in CP::Currently in Arizona -- CAN RELOCATE

Not afraid to travel, perform other tasks as necessary, or get my hands dirty.

Will be available after already scheduled NACE CP-1 course work completed at the end of July 2008

Licenses/Certifications:
NACE Corrosion Technician # 18738
Certified Commercial Diver
Licensed FAA Private Pilot ASEL
Oregon Licensed Contractor # 114682 (inactive)


Skills:

Administrative:
Many years experience owning and managing all aspects of a small service business with subcontractors and employees. Computer literate.

Corrosion Related:
Five years experience in marine environments. My primary responsibilities included the installation of galvanic anodes on bulkheads, docks, piers, etc. Additionally, approximately 30% of my corrosion control responsibilities entailed underwater sandblasting and coating of marine structures.

Mechanical:
Many years experience in the use of all manner of hand, power tools, and test instruments; automotive/motorcycle repair and maintenance; burning and welding; carpet installation techniques and tools; laminate flooring installation and interior trim; forklift operation; small and large watercraft use and maintenance; sandblasting and coating/painting; basic woodworking; etc.

Corrosion Education/Training:

Corrosion Related: (scheduled or in progress)
07/08 NACE CP-1 Cathodic Protection Tester certification course – Houston, TX

Corrosion Related: (completed)
04/08 NACE Basic Corrosion Course – Certificate score 97%.
03/08 NACE CP-1 Cathodic Protection Tutorials No. 1,2,3 & 4 – Certificate.
05/08 NACE Western Area CP Rectifier School – Certificate
06/08 NACE Arizona Section CP Rectifier Troubleshooting & Maintenance School – Certificate

Other Education/Training:
Scottsdale Community College; Scottsdale, AZ; Crime Scene Technology; 2005; 4.0 GPA,
4 Point Scale; 6 credits; Semester Hours

Metropolitan Community College; Omaha, NE; Criminal Justice; 1993; 4.0 GPA,
4 Point Scale; 49 credits; Quarter Hours

Garden State Flying Service; Berlin, NJ; Fixed Wing Aviation (licensed
Pilot - ASEL); 1987

Divers Academy of the Eastern Seaboard; Camden, NJ; Commercial Deep Sea
Diving (certified); 1985

Corrosion Related Experience:

Owner/Diving Supervisor - Commercial Diving Services, Inc.
Six years working experience as a commercial diver in the NY/NJ area as the owner, chief diver, and diving supervisor for an underwater maintenance company. For five of those years I was engaged primarily in corrosion control work. Corrosion control tasks/responsibilities included underwater welding for galvanic systems installation; conduit and cable installations for test anodes and stations; sandblasting and coating of underwater splash zone areas of various marine structures; underwater pipe penetrations for corrosion inspection and maintenance; underwater jetting and dredging of high mud zone areas near dock facilities to provide clearance for cathodic protection components; collaboration with corrosion engineers and CP technicians regarding specifications, plans, drawings, and essential other sundry tasks necessary for achieving proper cathodic protection levels on various marine structures throughout the North Eastern United States.

Other Experience:

Webmaster - Ecommerce
Designed, built and presently manage ecommerce website.


General Manager - JD Morgan
Managed a service business engaged in floor covering installation contracts. A journeyman mechanic myself, I was also responsible to manage and oversee installations performed by sub-contractors and employees. I managed the day to day small business affairs, books, records, inventory receipt and control, accounting, taxes, payroll, etc. Designed and implemented a Lotus Approach based database for job scheduling and tracking, inventory control, and for ease of job status reporting to our clients. Designed and fabricated custom tools/clamps and implemented improved techniques to effect greater quality and efficiency in our operations. Additionally, I personally provided detailed floor measures, inspections, drawn floor plans, and bids/quotes for materials and labor.
::Apr 19, 2008::July 21, 2008::2454669::mudliner::0::0::0 2070::Brajesh Kumar Jha::A-408, Hostel-12, IIT Bombay,Powai ::Mumbai, MH, India::91::400076::9833616484::brajeshjha0@gmail.com::Office&&Engineering&&Certified or Licensed&&Research&&Inspection::http://::Position Desired:Corrosion Engineer ::Brajesh:Corrosion Engineer::Brajesh Kumar Jha
M.Tech (Corrosion Sci. and Engg.), Met. Engg. and Mat. Sci., IIT Bombay
M.Sc (Physical Chemistry), University of Delhi
B.Sc (Honors), Chemistry

Hostel Address: Email: brajeshjha0@gmail.com
A-408,Hostel-12,IIT Bombay, Mobile: 9833616484
Powai, Mumbai, India-400076 Sex: Male
Languages Known: English, Hindi, and Magahi Date of Birth: 01-MAR-1979

Career Objective:

To utilize my skills and experience for an organization where my technical, analytical as well as interpersonal skills could be tested as an eager learner to its fullest and would provide me with enormous opportunity to grow as a professional in technical space and interact with potential people which can help me to grow as a well-rounded manner to achieve targets.


Academic Performance:


Examination, University, Institute, Year, Class/SPI

M.Tech (Corrosion), IIT Bombay, IIT Bombay, Mumbai, July 2008,4th sem-Awaited, 3rd sem - 9.81/10,2ndsem-8.00/10,1st sem - 8.68/10.

M.Sc (Physical Chem.), University of Delhi, Z. H.College, NewDelhi, 2005,2nd
B.Sc(Chem.Honors), T.M.B.U, Bhagalpur, G.B.College, Naugachia, 1999/2001,1st
Intermediate, B.I.E.C Patna, G.B.CollegeNaugachia, 1995,1st
Matriculation, B.S.E.B Patna, Inter School Naugachia, 1993 1st


Academic Achievements:

• Topped (1st & 3rd Sem) in M.Tech (corrosion science and engineering), IIT Bombay
• Secured All India Rank 230th in GATE 2006
• Topped in B.Sc (Honors) Chemistry, G.B.College, Naugachia.

Technical Skills and Experience:

• Hands-on experience of AC/DC electrochemical polarization to evaluate corrosion behavior of metals and coatings under corrosive environment. (July 2007-March 2008)
• Hand on experience with high temperature-high pressure autoclave for evaluation of material and effectiveness of inhibitor in simulated sour environment. (July 2007-March 2008)
• IGC Monitoring of TIG welded Mild steel experimental training to B. Techs of IIT Bombay. (July-Nov 2007)
• Development, Characterizations and performance evolution Nano- organic coating by FT-IR, AFM, SEM, TEM, EDAX, TGA, DSC, and XRD.
• Knowledge of various ASTM and BS standards for corrosion testing and paints and coatings


Responsibilities and Position held:

• Worked as Teaching Assistant 20 month (July 2006-March 2008) to Professors at IIT Bombay.
• Member of technical and financial committee , 5th International Symposium on surface protective coatings (SSPC 2007) 26-28th Nov, 2007,Mumbai, India
• P.G. sports secretary of Met. Engg. And Mat. Sci. IIT Bombay 2007-2008.
• Sports secretary , G. B.College Naugachia, 2000-2001
• Member of National Association of Corrosion Engineers (NACE) International and
• Member of SSPC –India chapter

M. Tech Project:

High performance grafted nano-alumina particle modified waterborne polyurethane nano-composite coating (Jan-2007 to July 2008).
Abstract:
Environmental friendly waterborne polyurethane coating has unique properties but not commercialized on large scale due to some disadvantages. In this work waterborne polyurethane coating modified using nanotechnology with special treatment. Till now many properties improved successfully even that some result sowing excellent result which is not expected before. Like dispersion properties of Nano alumina after chemical treatment which was a big problems. Scratch resistance of this system improved exceptionally. Coating materials were characterized using FT-IR, atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-visible spectroscopy, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). ). Bend test, impact resistance test, pencil hardness test and cross-hatch test were also carried out to evaluate the hardness and adhesion behavior of the coating.


Performance of these coatings on mild steel substrate in terms of their hardness, corrosion resistance, and thermal stability were found suitable for automotive and aerospace applications.


Publications:

• B. K. Jha, A. S. Khanna, Silicone grafted nanoalumina particles based waterborne polyurethane coating for improved corrosion resistance and mechanical properties, European Polymer Journal (Communicated)
• S. S. Pathak, A. Sharma, B. Jha, & A. S. Khanna, Novel waterborne Nano-structured coatings, Asian J. Exp. Sci., Vol. 22,No. 2,2008; 195-196.
• S. S. Pathak, A. S. Khanna, T. J. M. Sinha, A. Sharma, B. Jha , Synthesis and performance evaluation of waterborne coatings for light weight alloy, , 5th international conference on surface and protective coating (SSPC 2007), The Residence Hotel, Mumbai, India, 26th – 28th Nov, 2007
• S. S. Pathak, A. Sharma, B. K. Jha, T. J. M. Sinha, Property enhancement of convention organic resin by silicone modification for high performance coating, Thin Film conference, Singapore, May 2008


M.Tech Corrosion control activity:-

Publications:

• A. S. Khanna, B. K. Jha, Additive and Admixture a concrete solution, Chemical World, Volume 6 No.7 , March-April 2008
• A. S. Khanna, B. K. Jha, Performance and Maintenance of Galvanized Structural Steel in chemical environment, Chemical World, (communicated)

Seminar:-

• Corrosion prevention properties of conducting polymer(Sep-Nov 2006), IIT Bombay

Case Study:-

• Control Measures in Internal Pipeline Corrosion for petrochemical Industries, (Feb-Apr 2007)
• Corrosion cost calculation for industry, (Sep-Nov 2007)

Course Presentations:-

• Online and offline boiler cleaning. (Sep-Nov 2006)
• Corrosion in Micro electronic devices. (Jan-Apr 2007)
• Application of Polymeric Matrix Nnao-Composites (Sep-Nov 2007)
• Coating failure and its prevention (Feb 2008)


Workshop attended:-

• Technical Talk on R & D to enhance pipeline reliability by R. W. Revie, CANMET Materials Technology Laboratory Natural resources Canada, Ottawa at Hotel Atithi Vile Parle (E) Santacruz Airport, Mumbai- 400 099,Jan 23,2007,
• Technical workshop on nanotechnology in paint coatings , SSPC-INDIA, Mumbai , May 12,2007

M.Sc (Chemistry) course Projects and experiments:-

• Advanced Biophysical Chemistry: Polymerase chain reaction for amplification of DNA and RNA.
• Electrochemistry: Polarometric titration using dropping-mercury electrode.
• Advanced computational science: Simulation of Nucleophilic substitution reaction.

Computer activities:

• Project: Developed Software requirement specification (SRS) for Recruitment and Placement Activities of IIT Bombay. (Jan-Apr 2007)
• Skills: Programming Languages/OS: MS Office, SQL, HTML, XML, Windows 95/98/2000/XP

Extracurricular activities/hobbies:

• Explore about nature , Meditation, Traveling and Football

Reference:

Prof. A. S. Khanna (M.Tech project supervisor)
Former chairman of NACE of Asia Pacific Region, Chairman of SSPC India
Department of Metallurgical Engineering and Materials Science
Indian Institute of Technology Bombay
Mumbai- 400 076,Email: khanna@iitb.ac.in
Phone/Fax: 022-25767891

Declaration: I declared that all information mentioned above is true by my knowledge


Brajesh Kumar Jha

::Apr 19, 2008::July 21, 2008::2454669::hari,,,om::1::0::0 2069::Krishnakumar G. Nair::6, Nishigandha, Chinchpada::Pen, Raigad::MH::402107::+912143256186::unicorrengg@yahoo.com::Management&&Engineering&&Certified or Licensed&&Inspection&&Field Work&&Miscellaneous::http://::Cathodic Protection ::Senior Corrosion & Cathodic Protection Technologist::INDIAN NATIONAL, NACE USA Certified Senior Corrosion Technologist and MICorr grading from Institute of Corrosion-UK, with 19 years experience in Cathodic Protection Technology / Corrosion Control Engineering, is available for employment. ::Apr 18, 2008::July 20, 2008::2454668::proprietor::0::0::0 2068::d bergey::7140 n clare ave::harrison::mi::48625::989 429 6351::dustinbergey@aol.com::Field Work::http://::Position Desired:Corrosion Tech/Surveyor ::OVER 7 YEARS CORROSION EXPERIENCE IN THE FIELD:: I have been working in the field performing Close Interval Surveys, DCVG Surveys, GPS surveys, and other surveys in the same field. I have been a foreman/supervisor for more than 5 years in the field. I am currently looking for work in the same general field dealing with Cathodic Protection. I am drug free and I have all OQ qualifications needed to performs surveys and inspect/repair/read rectifiers as well. thank you for your time.

DUSTIN M. BERGEY

7140 N CLARE AVE · HARRISON MI 48625
989 429 6351 · DUSTINBERGEY@AOL.COM


OVERVIEW

Over (7) years of experience in the oil and gas field of corrosion and Cathodic Protection business. Experience and Skills have touched many facets of the Oil Field production business(i.e. operations, sales, service, and technical). Experience in water production and treatment facilities Cathodic Protection systems.

I am seeking a position which includes responsibilities related to corrosion prevention duties. Including Cathodic protection, internal corrosion control, atmospheric corrosion control, and protective coating and linings.

Highly motivated and responsible employee recognized for:
• Commitment and Reliability/Perfect Safety Record
• Hardworking
• Strong communication skills
• Client relations
• Creative problem solving skills
• Computer skills Power Point, Excel, Word, etc.


EDUCATION

Harrison High School Graduate -Diploma

FUNCTIONAL SUMMARY
I am a self motivated employee. In the past seven(7) years I have been a foreman/crew leader/field supervisor for over five(5) years. I have been in charge of crews from as little as three(3) and as large as eleven(11) workers at one time. I have performed all types of survey and testing/troubleshooting for Cathodic Protection systems all over the country. I have always had good client relations, and I have always been able to keep the job cost at a minimum.


SUMMARY OF OPERAT0R QUALIFICATIONS (NCCER)

Corrosion Prevention Field Technician 2
*Check for Proper Operation of a Rectifier (3.2)
*Troubleshoot Rectifier Bond Connections (4.1)
*Test to Detect Interference (1.3)
*Conduct Close Interval Survey (1.2)

Corrosion Prevention Field Technician 1 - Installation V4
*Inspect for External Corrosion on Buried or Submerged Pipe (5.2)
*Inspect for Physical Damage on Buried or Submerged Pipe (5.1)
*Inspect the Condition of External Coating on Buried or Submerged Pipe (5.3)
*Apply Atmospheric Coating (7.5)(7.6)(7.7)
*Prepare surface for atmospheric coating (7.2)( 7.3)(7.4)
*Install Test Leads by Exothermic Welding and other Methods (2.3) (2.4)
*Repair Damaged Test Leads (2.2)
*Insert and Remove Coupons (10.1)
*Prepare surface for coating by abrasive blasting (13.3)
Abnormal Operating Conditions - General Pipeline V2
*Abnormal Operating Conditions (General)

Corrosion Prevention Field Technician III
*Install Bonds (9.1)
*Install Impressed Current Ground beds (9.4)
*Adjustment of Rectifier (4.3)
*Install Rectifiers (9.3)

Corrosion Prevention Field Technician 1 - Measurement
*Check for Proper Operation of a Rectifier (3.2)
*Measure Structure to Soil Potentials (1.1)
*Obtain a Voltage and Current Output Reading from a Rectifier (3.1)
*Troubleshoot Rectifier Bond Connections (4.1)


EMPLOYMENT

Jan. 2006 - present (Laid off) Hanson Survey & Design Houston, TX
Crew leader
*Oversee and perform CIS surveys, DCVG surveys, GPS surveys, and troubleshoot problems in Cathodic Protection systems, inspect tank yards, inspect storage fields

Feb. 2003- Dec. 2005 Allied Corrosion Industries Marietta, GA
Field Supervisor
*Perform CIS, DCVG, DOC, ECDA, and Soil Res surveys
*Install and troubleshoot groundbeds and impressed anodes.
*Install/Inspect/Troubleshoot Rectifiers
*Tank Inspection

Oct. 2001- Dec. 2002 Hanson Survey and Design Houston, TX
Crew leader
*Perform CIS, DCVG surveys

Jan 2001- Oct 2001 Mears Engineering Rosebush, MI
General Laboror
*Locate Pipelines, Perform CIS, DOC, Soil Res, and GPS surveys.
*Install & Replace Pipeline Signs and Markers

Oct. 1999- Dec. 2000 Biewer Sawmill Mcbain MI
Genaral Laborer/Chop Saw Operator


REFERENCES

Pete Hanson- Hanson Survey and Design (Owner- Operations Manager)
888 327 2216 office 713 703 5503 cell

Richard Baxter- Hanson Survey and Design (Data processor)
888 327 2216

Carol Kimbley- Hanson Survey and Design (Office manager)
888 327-2216

Rob Worden- Allied Corrosion Industries (Operations Manager-CIS)
770 425 1355 office 678 794 7643 cell

Gordon Carson- Allied Corrosion Industries (FT. Worth, TX Manager)
281 757 6951

Shelly Wiles- Allied Corrosion Industries (Data processing)
800 241 0809


::Apr 16, 2008::May 17, 2008::2454604::7151::0::0::0 2067::Joe Warren::11377 Aqua Rd::Houghton Lk::MI::48629::989-422-6421::jwarren26@hotmail.com::Certified or Licensed&&Field Work::http://::Position Desired: Corrosion Tech ::Nace certified CP-1 Tester 3yrs field experience::Joseph D. Warren
11377 Aqua Rd
Houghton Lake, MI
48629
Home Ph: (989) 422-6421
Work Ph: (989) 388-2366
Email: jwarren@nationalpipelineservices.com

Joe Warren; Field Supervisor

Employment History:

MEARS Engineering Cathodic Protection Group (CPG) from ’05 to Feb. 2008
National Pipline Services; Feb. 2008 to present

Job Duties:

•Maintaining and reading (inspection) of rectifiers in compliance with the Code of Federal Regulations. (CFR part 192)
•Annual test stand readings in accordance with CFR part 192
•Conducting cathodic protection surveys including On/Off, Depolarized, and Direct Current Voltage Gradient. (DCVG)
•Pipeline Current Mapper (PCM) and depth surveys.
•External Corrosion Direct Assessment (ECDA) projects as required by CFR part 192
• Responsible for a four to six man crew.
•Pipeline location and marking of underground facilities

Equipment experience:

 Iciss CP Data collector
 Allegro CX
 Trimble Pro XR GPS Data Logger
 Metrotech 480/810 Locators
 Radio Detection RD 4000 Locator
 Sesco interrupters / Radio Detection Smart Interrupters
 DCVG PCS 2000 Data Collector
 Fluke Scopemeter
 Tinker and Rasor DL-1 Data Logger

Software:

 Data Processing Software
 GPS Pathfinder
 Pipeline Compliance System ( PCS )

Operator Qualifications / Certifications

• Pipeline Markers
• Abnormal Operating Conditions ( AOC )
• Accidental Ignition
• CP System Maintenance: Rectifier
• CP System Maintenance: Electrical Isolation
• CP System Maintenance: Anodes/Anode Ground bed
• CP System Maintenance: Diodes
• CP System: Electrical Connections
• CP System Testing: General
• Soil Resistivity
• Pipe to Soil
• Locating Pipelines
• NACE Cathodic Protection Tester (CP-1) certification # 16013
::Apr 15, 2008::July 17, 2008::2454665::canam400::1::0::0 2066::Dhanajit Singha::Ramnagar Tuko::Silchar, Assam::78::8008::00974-6744124::dhanajit.singha@gmail.com::Engineering&&Field Work::http://::Position Desired: Cathodic Protection Engineer ::Cathodic Protection Engineer::DHANAJIT SINGHA
Qatar Resident Permit

dhanajit.singha@gmail.com
Cell: 00974-6744124 (Qatar)


BRIEF OVERVIEW


B.E. Mechanical, Total 6+ years experience in Oil Exploration Company and currently working in the field of Cathodic Protection system in an MNC located at NOIDA, INDIA. Worked at various project implementations across India and Overseas.

PROFESSIONAL EXPERIENCE


From April 2006 to till date

Tyco Thermal Controls, India Design Centre, NOIDA, INDIA
An ISO 9001 MNC head office at Houston, USA having its offices in 48 countries across the world dealing in multi-engineering field.

Designation: Sr. Engineer – Cathodic Protection

Roles and Responsibility:

• Installation, and testing of Cathodic Protection System for cross-country pipeline
• Site assessment, Economic feasibility.
• Project planning, Manpower planning, Project Execution, CP surveys
• Monitor, evaluate performance & train the subordinate supervisors & technicians to enhance their operational efficiencies
• Ensure adherence to quality standards implementation (ISO 9001) & maintaining all related documents of QA/QC
• Design of Sacrificial and Impressed current Cathodic protection system (Cross country Pipeline).
• Installation of deep bore-well ground bed.
• Installation of horizontal ground bed.
• Installation of vertical shallow ground bed.
• Installation of Test lead posts (TLPs).
• Installation supervision of Cathodic Protection system in Concrete structure.
• Installation of Ti/MMO mesh anode of GRID system for tank bottom CP.
• Commissioning of Tank bottom CP system.

Projects Worked:

Presently (March 2007 to present):
Cathodic Protection system for Concrete structure and Sea water screen system for EPIC of Ras Laffan Common Cooling Sea Water System Phase-II for Once through consumers of Qatar Petroleum, State of Qatar.

Client: DODSAL ENGINEERING & CONSTRUCTION PTE LTD
Consultant: ELECTROWATT-EKONO

Project Cost: US$ 16 Million.

Quantity of Concrete casting: 110,000 cum approx. (Under CP protection)

Main Duties:
Installation Supervision of Cathodic Protection system – MMO/Ti Ribbon Mesh anode installation, Ti Current distributor bar installation, spot weld, assembly of Ag/AgCl permanent reference electrode & Ti/MMO pseudo reference electrode, anode feeder cable connections, system negative (drain point) cable connections, instrument negative cable connections, positive header cable connection from Junction box/test post to Power supply, negative header cable connection from Junction box/test post to power supply and onsite installation of the mentioned CP components, monitoring of anode-cathode discontinuity of CP system prior to concrete pouring and during pouring. Installation of Pt/Ti wire anode perforated in casing for Sea water steel structure of rotating drum, racking screen in Pump House No 1 & 3 and Stop Log gates. Installation of MMO/Ti wire anode and Cu/CuSo4 reference electrode for the Earthing Rod of Earth-pit system in bore hole anode ground bed. Supervision of Tank foundation construction of Fire water Tank for Grid system MMO/Ti Ribbon Mesh anode installation and reference electrode as per Design of Tank bottom ICCP & Tank Internal sacrificial aluminium (Al) anode system. Anode/cathode Junction box installation, Big fink test post installation, Power supply unit (SMPS) installation, termination of cables in Junction boxes & Power supply unit, Pre-commissioning CP system record by manual. RS 485 communication cable layout from each power supply unit to Local unit (LU) and then to Central unit (CU) by Fiber optics cable for the Integration of the CP system and remotely access.

Prepared and fabricated prototype model of all kinds of Concrete CP system installation viz. MMO/Ti Ribbon Mesh anode installation for new concrete structure (new reinforcement), Slotted MMO/Ti Ribbon Mesh anode installation for old concrete structures and MMO/Ti Mesh anode installation on the surface of old concrete structures with all components for Presentation in the exhibition of “12th Middle East Corrosion Conference 2008” in Bahrain.

Nov 2006 – Feb 2007:
Numaligarh Siliguri Product Pipeline (650 km approx) of Oil India Limited, India.

Client: GAMMON INDIA LIMITED.

Consultant: ENGINEERS INDIA LIMITED

Project Cost: INR 35,000,000

Main Duties:
Soil resistivity survey and road survey data collection for Pre-Design of Temporary (Sacrificial) Cathodic Protection of 206 km pipeline along the ROW, Design of Sacrificial and Impressed Current Cathodic Protection system. Installation of Sacrificial Anode (Mg) & Test lead post (TLP), Anode cable connections, drain point cable connections, Pin brazing, vertical shallow sacrificial anode ground bed and Deep Bore Well Anodes, measurement of PSP (Pipe-soil potential).


Aug 2006-Oct 2006:
Makeup Water Pump House project of NTPC, Sipat, Chattishgarh, India.

Project Cost: INR 1,000,000

Main Duties:
Installation of Sacrificial Anode (Mg) & Test lead post (TLP), Anode cable connections, drain point cable connections, Thermit weld, horizontal (sacrificial) anode ground bed and Deep Bore Well Anodes. Installation of anode/ cathode Junction Boxes, measurement of PSP (pipe-soil potential).

From October 2001 to March 2006

TechnoGrid Pte Ltd, Assam, India.
An Oil Exploration company specialist in Shot Hole Drilling and Seismic Job Services.

Designation: Engineer

Roles and Responsibility:

• Management and train to technical manpower engaged in Seismic operation.

• Toll meeting regarding HSE, daily work progress & work performance for the next day.

• Operational performance and regular schedule maintenance of mechanical drilling Rigs (Jacro SS-175 & SS-150) and rotary mechanical in various projects.

• Adoption of right drilling technology and methodology for different types of surfaces.


ACHIEVEMENTS AND PROJECTS

• Upholes at depth range of 75m by mechanical Rig (Jacro) for 2D Seismic survey in the area Cachar Block, Assam for Premier Oil Cachar BV, a British Oil Company.

• Water sample & soil sample test hole at depth range of 90m by mechanical Rig (Jacro) in the area Digboi, Assam for Premier Oil North East India, a British Oil Company.

• 3500 nos Shot hole at depth range of 20m to 35m by mechanical Rigs (Jacro) and rotary mechanical and Upholes at depth range of 50m to 65m for 3D seismic survey in the area Manikyanagar, Tripura for ONGC Geophysical party 33,A&AA Basin Jorhat Assam.

• 3000 nos Shot hole at depth range of 20m to 35m by mechanical Rig (Jacro) and rotary mechanical and Upholes at depth range of 50m to 65m for 3D seismic survey in the area Borhoola-Sorupothar, Assam for ONGC Geophysical party 9,A&AA Basin Jorhat Assam.


QUALIFICATION

• Jorhat Engineering College, Dibrugarh University, Assam (India) in 2001
B. E. [Mechanical]- 72.24%

• Cachar College, Assam in 1996,10+2 (Science) – 64.6%


COMPUTER KNOWLEDGE

• Proficient with the use of AutoCAD 2004,Windows 2000,XP, Vista & MS Office 2003,2004,2007.
• Installations and trouble shooting of Windows OS

PERSONAL DETAILS

• Unmarried/ Male/ Indian willing to relocate anywhere in the World
• Date of birth: 01-06-1977
• Languages known: English, Hindi, Bengali, Assamese & Manipuri
• Passport No: F9675459
• Qatar Driving License: Applied for

REFERENCES


Available on request


Place: Doha, STATE OF QATAR
::Apr 10, 2008::July 12, 2008::2454660::hariom::0::0::0 2064::Ronald Z Hodgman::310 N Indian Hill Blvd #721::Claremont::CA::91711::9099124892::rzhodgman@earthlink.net::Engineering&&Certified or Licensed::http://::Position Desired: Corrosion Engineer ::Corrosion Engineer::WORK HISTORY

Corrosion Engineer, Schiff Associates, Claremont, CA (2007-Present)
Engineer for cathodic protection design and various corrosion related projects

Corrosion Specialist, Northern Natural Gas Company, Bloomington, MN (2006-2007)
Technical support for the Minnneapolis Region of Northern Natural Gas.

Pipeline Corrosion / Integrity Engineer, Think Energy /
BP Dome Pipeline, Iowa City, IA (2005-2006)
Contract corrosion and pipeline integrity work for BP Dome Pipeline

Senior Corrosion Engineer, M. J. Schiff & Associates, Inc.,
Concord, CA (2004-2005)
Project manager for pipeline integrity surveys mostly in the water / wastewater industry

Senior Corrosion Engineer, Corrpro Companies, Inc.,
San Leandro, CA (1996-2003)
Survey and evaluate existing cathodic protection systems, design and install new cathodic protection systems, and internal and external corrosion failure investigations. Involved in cathodic protection design and field testing for a variety of cathodic protection applications.

Materials Engineer, Chevron Research & Technology Company, Richmond, CA (1992-1996)
Pipeline and corporate corrosion control consulting, Chevron corporate technical manual writer on pipeline corrosion control, corrosion expert witness, non-metallics technical support on hoses, elastomers, pipeline coatings, and atmospheric coatings

Corrosion Specialist, Chevron Pipe Line Company, San Ramon, CA
(1989-1992)
Represented Chevron Pipe Line on NACE International, GRI (Gas Research Institute), and API (American Petroleum Institute) Technical Committees. Home Office Engineering corrosion consultant. Standardized corrosion standards and practices for Chevron Pipe Line.

District Transmission Engineer, Natural Gas Pipeline Company of America, Victoria, TX (1988-1989)
Compressor engine maintenance, electronic and dry flow chart gas measurement, corrosion control, and other miscellaneous district engineering tasks.

Corrosion Control Engineer, Natural Gas Pipeline Company of America, New Caney, TX (1981-87)
In charge of complete corrosion control of approximately 1,200 miles of natural gas pipeline located in the states of Texas, Louisiana, and offshore in the Gulf of Mexico. Supervised two corrosion control technicians.

PROJECTS

Supervised 350 miles of close interval pipe to soil survey and analyzed the survey data to locate pipe coating damage

Key team member in running a total of 900 miles of electronic metal loss survey and grading of the data which found 3 miles of corroded pipe that required replacement.

Assisted computer software developers in designing pipeline integrity software for BP Dome Pipeline. Software used included PICS (Pipeline Information Control System) by Baseline Technologies, Inc., RiskAnalyst by Dynamic Risk, Inc. and HCA Analyst Tool by Integrated Informatics, Inc.

Construction engineer on hydrotesting 21 miles of pipeline believed to have possible stress corrosion cracking problems.

Wrote the pipeline corrosion control section of the American Petroleum Institute (API) pipeline integrity recommended practice

Construction Engineer on a 2.5 million dollar pipeline rehab project that recoated 22 miles of 30-inch pipeline and replaced 2 miles of corroded pipe.

Chief Construction Engineer on a pipeline rehab project that replaced 2 miles of corroded 10-inch diameter pipeline.

Chief Coating Mill Inspector on several projects that coated a total of 150 miles of pipe.
Project Leader of testing an experimental computer system to read cathodic protection rectifier data by pipeline patrol plane.

Project Manager for a project which involved close interval pipe to soil survey, depth of cover, and GPS measurements on 25 miles of petroleum product pipeline.

Designed, witnessed installation, supervised installation, and performed final post-installation inspection as required by project specifications for cathodic protections systems installed to protect natural gas, crude oil, petroleum product, reclaimed water, and water pipelines.

EDUCATION

Bachelor of Science in Chemical Engineering Michigan State University

PROFESSIONAL AFFILIATIONS

Tau Beta Pi - National Engineering Honor Society
NACE International
Registered Corrosion Engineer in California, #CR1139
SSPC (Steel Structures Painting Council) ::Apr 1, 2008::July 3, 2008::2454651::lucky149::0::0::0 2063::majid::1313 13av sw::calgary ::ab::T3C3S1::4034524490::majid365@yahoo.com::Intern&&Engineering&&Research&&Inspection::http://::Position Desired: Corrosion Engineer ::Experience in Corrosion::MAJID MEHDIFAR
1313,13AV SW, Calgary Alberta
Tel: 403-4524490 E-mail: majid365@yahoo.com

EMPLOYMENT OBJECTIVE: To obtain a position as a Corrosion or Material Engineer

SUMMARY OF ACHIEVEMENTS AND QUALIFICATIONS
• More than 10 years’ combined experience working in the Oil and Gas industry and EPC environment
• Detailed knowledge and expertise in material selection, inspection, corrosion monitoring, chemical inhibitor treatment and injection, protective coatings, pipeline integrity, corrosion/mechanical damage assessment and cathodic protection (CP) system design, construction, commissioning and trouble-shooting
• Experienced in Vendor selection and operation (screening, monitoring, evaluating, and coordinating)
• Familiar with various Oil and Gas Technical Standards: NACE, API, ASME, ASTM
• Five years working with international engineering consulting companies / licensors
• Certificate of Designing for corrosion control by NACE
• Advanced skills in technical report writing, work planning and personnel management

PROFESSIONAL EXPERIENCE

SENIOR CORROSION ENGINEER 2004- 2008
National Iranian Oil Engineering and Construction Company, Iran(NIOEC)
• Worked with international engineering consulting companies / licensors including Axens (French) to review Material Selection
• Participated in BandarAbbas Refinery Upgrading Project; budgeted at US$1 billion with a refining capacity of 320,000 BPD
• Analyzed information and evaluated results to choose the best solution of the corrosion problems
• Evaluated technical specifications and economic factors relating to process or product design objectives
• Reviewed the pressure piping selection for piping materials in various services
• esearched about painting, coating and materials and apply them as needed
• valuated cathodic protection for underground piping
• ooperated with Gas company to solve corrosion problems of 100 Km. of underground pipeline through research, coatings tests and surface preparation

CORROSION ENGINEER 1996-2004
Arak Oil Refining Company, Iran
• articipated in Design and Installation of new Projects including Demineralization Unit, Condensate recovery System, Boiler with 220T/hr, Pipelines with Coatings and Cathodic Protection System
• anaged corrosion in industrial water treatment and process units to reduce the costs
• onitored and maintained records of the underground pipelines by weekly to support cathodic protection
• ontrolled the rate of chemicals and additives to prevent corrosion by 90 percent and reduce the costs of failure
• pplied painting schedule with reference to the applicable painting specification
• stimated corrosion rate through laboratory tests, corrosion coupon and corrosion meters in preventing further corrosion by more than 80 percent
• alculated the corrosion rate by records of piping and equipment thickness in overhaul inspections
• upported cleaning, internal inspection and repair program for equipment and piping

UTILITY ENGINEER 1991- 1996
Arak Oil Refining Company, Iran
• ommunicated strongly with international engineering consulting companies / licensors including JGC( Japan), TPL( ITALY), UOP( UK) in order to clarify any ambiguity concerning technical aspects of project
• articipated in installation, and commissioning of the cathodic protection (CP) systems for the Pipelines
• xperienced in pre-commissioning, commissioning and start-up of plants
• ontrolled the quality and corrosion rate of the demineralization, boiler water, cooling water, and waste water units by the inhibitors, laboratory tests, and corrosion meters

EDUCATION
Master of Business Administration, University of Wollongong, Australia 2003
Bachelor’s degree, chemical engineering, Abadan institute of technology, Iran 1991

CERTIFICATES/ TRAINING
Canadian Orientation Abroad Session – IOM, Iran, 2008
Targeted Selection Mock Interview- City of Calgary, 2008
Designing for corrosion control, NACE, Calgary, 2008
Corrosion and corrosion prevention: Troubleshooting of corrosion in industries,
Certificate of ENSPM Formation Industry, France, 2001
Corrosion Management and RBI in the oil and gas industry , 2007
Iranian Corrosion Association
Project Management, Aryana Project Management Institute, 2007
Hazop Training Course, Organized by Sicest, Italy, 2007
HSE General Training Course, Imen Kia Sanat, 2007
Environmental Management System Internal Auditor Course and Internal Auditor Training Course, 1999
SGS International Certification Services, Germany

MEMBERSHIP
National Association of corrosion engineers (NACE)

REFERENCES Available upon request
::Mar 31, 2008::July 2, 2008::2454650::pooyan::0::0::0 2062::Richard Sniffen::321 West Elm Street Box 5::Texhoma::OK::73949::580-651-2652::pontaweecamp@yahoo.com::Certified or Licensed&&Inspection&&Field Work::http://::Position Desired: ::CERTIFIED NACE Corrosion Technician::NACE International Corrosion Technician

Education

1974 - 1979 Washington HS
New York, NY

1984 - 1986 Lake Henry Trade School
Littleton, CO
Business Management

1990 - 1995 OSU - FST
Stillwater, OK
Fire Fighting Academy A, B & C
Firefighter Instructor I
Arson Investigation I
IFSTA Instructor I
Emergency Vehicle Operator
First Responder
Terrorist First Responder

2005 Universal Rectifier Training & Repair
Seward County Community College
Liberal, KS.

2006 NACE International
Basic Corrosion

2007 NACE International
Corrosion Technician Certification

2008 University of Oklahoma
External Corrosion Course


Employment

1996 to present West Texas Gas Inc. Co
PO Box 1079
Guymon, OK 73942
(580) 338 - 3293
Supervisor : Billy Hawkins

Position : Corrosion Technician

Responsibilities : Transmission and Distribution Corrosion Control, Install Test Stations and anodes,
Install Conventional groundbeds and Rectifiers, Audits with DOT, TRRC and the OCC., Surveys and troubleshoot problem areas.

Salary : $18.00 hour based on 100 plus hours per 2 week pay period

1988 - 1996 Cimarron Oil & Gas
Industrial Park
Guymon, OK 73942
Supervisor : Danny Pearson

Position : ASME & "U" Code Inspector, Inventory Control and draftsman

Responsibilities : ASME and U underwriters lab. Code Inspector check and inspect welders workmanship on Code vessels, Inspect Paint and Coatings verify that requirements are met. Inventory Control, and drafting of code vessels and tanks.

Salary : $11.50 hour based on 90 plus hours per 2 week pay period

1982 to 1986 BlackHawk Specialist
Denver, CO

Position : Specized Security/Executive Protection

Responsibilities : Counter Espionage Measures, Specialzied Security, Executive Protection
( Bodyguard ), Security Instructor.

Salary : $1250.00 every 2 weeks $2500.00 monthly::Mar 17, 2008::June 18, 2008::2454636::hitchman::1::0::0 2061::Baskar Govindarajan::E 301, Bejanwala complex,Tadwadi,::Surat::Gu::395009::+919879103835::baskarg235@gmail.com::Engineering&&Certified or Licensed&&Inspection::http://::Position Desired: ::Manager- Inspection::

G.Baskar
E-301,Bejanwala Complex, Tadwadi, Rander road
Surat – 395 009,Gujarat, India
Telephone: (+91261) 2765595 (Resi.), +91 9879103835 (Mob.)
E Mail:baskarg235@gmail.com

Profile

A Quality Assurance/Control(QA/QC) Manager with more than 16 years of wide experience which includes Refinery, Cross country pipeline, Power plant and Steel plant in the construction industry.
(American welding society-Certified welding Inspector (AWS-CWI) and certified painting Inspector (CIP), Lvl. II, by National association of corrosion Engineer’s (NACE), USA.

Experience

# (April 2006 to present date)
Essar Construction India limited, Hazira
DGM

• HOD of QA/QC service with 19 Engineers for the projects like SMP, HBI Plant, Oxygen plant, combined cycle Power plant, Corex, LNG Pipeline, etc. and its Structural fabrication, Piping works at Hazira.
• Managing Fabrication works of structures, Gas holder and pressure vessels for Blast furnace works at China.

Previous experience

# (April 2001 to March 2006)

• For HBI Plant, Module IV &V at Hazira managed a team of up to 8 Engineer’s of Quality control service.
• This includes construction of pressure vessels as per ASME Sec. VIII, Div I and Fabrication of structures, Inspection of piping works etc. as per various standards.


# (Jan 2000 to March 2001)
Essar projects limited, Gandhinagar
Dy. Manager

• I was with water pipeline project (40KM Length) of SPP – II under Gujarat Government for the Inspection works of 2 meter. dia. Pipelines per API 1104. Coordinated with third party Inspection agencies like EIL and SGS.


# (July 1996 to Dec.1999)
Senior Engineer, Jamnagar

• Gained lot of experience with 10.5 MT per annum Refinery project at Vadinar, Jamnagar. The consultant of this project was M/S ABB of England, ISO 9000 certified company

• Here looked after various activities of Crude oil tankages, Interconnecting piping works and cross country pipeline works of product, crude and water pipelines of various diameters as per international standards/Codes such as API 650/620/1104,ASME Sec. II, V, VIII, IX, ASME B 31.3/31.4 etc. and ABB, JCE Specifications.

• This Job involves verification of different WPS, PQR and various procedures submitted by contractors, Inspection of welding and raw materials at different stages by Radiography, Ultrasonic, DPT, MPT etc. and interpretation of Radiographs as per specifications applicable


# (Dec. 1991 to June 1996)
Senior Engineer / Engineer, Hazira

• Worked in inspection of heavy structural items like columns, crane girders, rafters etc. from the preparation of WPS, PQR and welder qualification for HRC plant, Down stream complex and Captive power plant. It includes UT, RT, DPT and MP testing and billing to contractors.

• Worked in inspection of piping works at Reheating furnace I and II, which is a part of HRC plant.

• Worked in Turbo expander of Sponge iron plant where the job involved was mainly inspection and testing of pressure pipelines and vessels of various materials such as P8,3 1/2 Nickel etc. Also worked with (PWHT) stress relieving techniques.

• Worked in Oxygen plant piping works where the job involved was mainly cold box, which was having more than 1300 joints of Aluminum welding of various diameters. The collaborator for this project was M/S HOPM of China.

• Worked in combined cycle power plant of 515 MW at Hazira as per IBR code and looked after the piping works of HRSG, LP, HP piping and condenser which involves P5,P7 material welding, 100% radiography, stress relieving and hardness testing.

•Attended in plant training at NLC Thermal power station-I, Neyveli Tamilnadu.


Education

• BE (Mechanical), Madurai kamraj University, Tamilnadu – 1988-1991,Class – I
• (HSC) Higher secondary, Neyveli – Tamilnadu, 1986-1987,Class – I


Additional Information’s

• AWS-CWI certificate holder (certificate no. 06061531)-Date of exp. May 2009
• NACE-CIP-II (Certificate no. 13680)-Date of Expiry-Aug 2010
• IIW Member no. BAR/M/R/8294
• ASNT Level II in UT , RT & Visual testing
• DOB – 23/05/1970


::Mar 15, 2008::June 16, 2008::2454634::prabakar::0::0::0 2060::Ibtesam::P.O Box 257 ::Dammam::1::31411::+966-50-3872068::hasanmt23@gmail.com::Engineering::http://geocities.com/hasanmt23::Corrosion Engineer ::NACE Certified Corrosion & Cathodic Protection Technician:: IBTESAM HASAN ABIDI
H.No 323 B Sumangli Housing Scheme
Quetta, Pakistan
+966 50 387 2068,Hasanmt23@gmail.com

OBJECTIVE: A Position as Corrosion Engineer or Materials Engineer

SUMMARY OF QUALIFICATIONS

• Three years experience in corrosion and cathodic protection.
• Extensive Hands-on experience in designing, installation, commissioning and trouble shooting cathodic protection systems.
• Motivated, self starter, effective in working alone or as a cooperative member
• Professional in attitude and appearance.

RELEVANT SKILLS

CATHODIC PROTECTION
• Managed 38 projects from quotation to invoice, since February 2007,20 projects independently.
• Designed cathodic protection system for more than 300 steel piles, supporting total 3 Km of causeway.
• Designed cathodic protection system for well casings, process vessels internal, buried plant piping, tank bottoms & internal, other metallic structures.
• Monitored, troubleshoot, and maintained CP System for 9 Oil & Gas producing facilities and over 150 wells of British Petroleum Pakistan and OMV Pakistan.
• Well convenient with Saudi Aramco, NACE, DNV, SABIC, ISO, NORSOK, and ASTM standards.

CORROSION AND INSPECTION
• Knowledge of lab and field corrosion test, inhibitors, and material selection.
• Knowledge of NDE techniques, including VT, UT and LT.
• Extensive experience of metallography, failure analysis and destructive testing i.e. hardness, impact, tensile, fatigue and creep.

DISTINCTIONS
• Awarded silver medal for 1ST Position in B.E.
• Winner of Midrex Steel’s Scholarships based on outstanding performance in metallurgy.

EMPLOYMENT HISTORY

02/2007-Present Cathodic Protection Engineer Abdualla Fouad Impalloy Co., KSA
01/2006-01/2007 Asst: Engineering Manager Oilman Technologies, Pakistan
(Corrosion)

EDUCATION

02/2008 Certified Stainless Steel Specialist
(International Stainless Steel Foundation)
12/2007 Certified Corrosion Technician
(National Association for Corrosion Engineers)
04/2006 Certified Cathodic Protection Technician
(National Association for Corrosion Engineers)
12/2005 Bachelors of Engineering in Metallurgy and Materials
(Mehran University of Engineering & Technology, Pakistan)

~Reference Available Upon Request~
::Mar 6, 2008::June 7, 2008::2454625::ibtesam::1::0::0 2059::Munosi Molai::27600 Kings Manor Dr, 462::Kingwood::TX::77339::903.918.3623::munosi@justice.com::Certified or Licensed&&Inspection&&Field Work::http://::Position Desired: Corrosion Technician ::Corrosion Technician::OBJECTIVE: Full time position utilizing excellent oral and written communication and educational experience in corrosion technology.

EDUCATION: Fall 2003 to Fall 2005,Kilgore College
Kilgore, Texas
Major: Corrosion Technology
(Phi Theta Kappa)
Cumulative G.P.A: 3.64
Associates of Science Degree with Honors, Fall 2005
NACE Cathodic Protection Level I, 2005
NACE Cathodic Protection Level II, 2006
NACE Internal Corrosion Program, 2007

EMPLOYMENT
HISTORY:
Shell Pipeline Company, Spring 2007 till present
CORRPRO Companies Incorporated, Fall 2005 till Spring 2007

CenterPoint Energy, Summer 2005

Kilgore College, Fall 2003 till Fall 2004

TCIM Services, Fall 2003 till Spring 2005

COMPUTER
SKILLS: Integrated Software Applications I
Microsoft Word®
Microsoft Excel®
Microsoft Publisher®
Microsoft PowerPoint®
Microsoft Outlook®


REFERENCES: Available upon request.

::Mar 4, 2008::Apr 4, 2008::2454561::1234566::0::0::0 2058::Larry G. Hiller::1600 Allen Dr.::Cedar Hill::TX::75104::972.291.0719::larryhiller@sbcglobal.net::Sales&&Management::http://::Position Desired: Senior Sales Manager ::Experienced and Successful::Larry G. Hiller
Business Development Manager

larryhiller@sbcglobal.net
1600 Allen Drive Cedar Hill, TX 75104
Mobile 817.371.9983 Home 972.291.0719

Objective: Senior Sales Manager in business acquisition/development.

Proven Capabilities:
„« Account acquisition and retention.
„« Lead generation and cold calling.
„« Territory management and customer support.

Strengths
Proven sales ability¡Xnumerous top sales awards.
Self starter needing little direction.
Willingness to travel.
Effective communicator and mediator.
Ability to mentor sales force to increase productivity.
Creativity in developing new approaches and troubleshooting problems.
Proficient in Microsoft programs Excel, Word, and Power Point.

CAREER SUMMARY

Eleven years experience in custom automated test equipment (ATE) sales:
Number one in company sales for five years.
Generated sales accounting for over 40% of total company revenues.
Assisted in opening and managing a remote sales office in Dallas, TX.

Twenty years experience in oilfield chemical sales:
Opened new production chemical markets in Mexico and the Far East
Increased chemical sales from $500k to $3M in one year in Saudi Arabia.
Introduced new raw materials in Saudi Arabia that made a more stable finished compound.
Formulated improved chemical compounds to increase production and lower cost in multiple fields.

Awards
Top sales five out of seven years selling ATE systems for Symtx.
Symtx ¡§Above The Bar Award: 1998¡¨
Symtx ¡§Award of Excellence: 1999¡¨
Symtx ¡§Build To Print High Sales Award: 2000¡¨
Top sales--West Texas Region/Champion Technologies, Inc.--two years
Top sales--South Texas Region /Champion Technologies, Inc. --one year.

EMPLOYMENT HISTORY

Custom Systems Integration, Inc. 4/06-present
(Supplier of Functional Test Systems to the Defense/Aerospace Arena)
Top salesman, promoted to Sales Manager after first year.
In charge of setting up sales force in the Southeastern and Western US.

Mindready LLC 11/04-4/06
(Supplier of Functional Test Systems to the Defense/Aerospace Arena)
Assisted in start-up of a woman-owned small US company for defense sales
Helped set up an office for engineering/manufacturing in Austin, TX.
In charge of introducing Mindready to the defense market.
Located and hired salesmen to cover the US.
Developed manufacturers¡¦ rep program to cover the US.

Symtx Inc. 6/97-11/04
(Supplier of Functional Test Systems to the Defense/Aerospace Arena)
Business Development Manager for the Southeast area of the US
Located customers with test needs in the following areas:
Telecommunication Systems (Optical, Wireless and Copper)
Aircraft, Missile and Space Systems
Commercial Electronic Products
Set up high level introductory meetings to establish needs and budgets.Worked with the system engineers to deliver proposals that fit the customer¡¦s needs.
Worked with the Symtx teams from the initiation of the project to delivery to insure customer satisfaction.

BJ Unichem 5/95-6/97
(International Oilfield Chemical Supplier)
Far East Regional Manager based out of Singapore.
Called on customers involved in production and refining of oilfield products.
Set up plant trials and assisted in product development.
Led analysis team to evaluate and provide chemicals to dramatically lower chemical and overall operating costs in a major field in West Texas.

Champion Technologies, Inc. 4/85-5/95
(International Oilfield Chemical Supplier)
Converted an unprofitable area around Odessa, Texas to profitability in less than one year.
Promoted to Country Manager over Mexico and developed the company presence in Poza Rico, Tampico, Mexico City and Villahermosa.
Functioned as a trouble shooter in South Texas and North Texas to save fields that the company was in jeopardy of losing.

U. S. Chemtech, Inc. 2/82-4/85
(Production and Drilling Chemical Supplier)
Part owner of this production chemical company in East Texas.
Worked all facets: area sales, field formulations, monthly reports, treating truck scheduling.

Baroid-Saudia Arabia 7/79-2/82
(Production and Drilling Chemical Supplier)
Country Manager in charge of sales for both drilling and production chemicals.
Oversaw the chemical blending and quality assurance personnel in the lab.
Worked with the local affiliate to increase market share.

Diversified Chemicals-Hobbs New Mexico 6/76-4/79
(Production and Drilling Chemical Supplier)
Opened up virgin territory for Dichem.
Promoted to District Manager after one year.

A.W. Thompson Drilling Company-Odessa, Texas 5/75-6/76
Worked all positions and trained as a driller

Jerry Hiller Company-Casper, Wyoming 5/73-5/75
Salesman for a five-state area of the following: Montello Mud Products, Weatherford Primary Cementation Equipment, Diamond Coring and Diamond Drilling


PERSONAL

Born in Midland, Texas, raised in the oil patch in Texas and Wyoming. From childhood was part of my dad¡¦s oilfield service company, traveling with him to locations on the job, working for him as a young man servicing equipment as it came back from rigs.

Education: Natrona County High School, Casper Wyoming; University of Wyoming; Texas A&M

Family: Married to Karen Baker, an educational theatre consultant. 3 grown children¡XJosh, Daniel, and Valerie. Two sheltie dogs and a very spoiled cat still live at home.

Pastimes: Grillin¡¦ up Cousin Ken¡¦s home-grown beef, playing very bad golf, and screaming for (and at) the Cowboys.


::Mar 4, 2008::May 5, 2008::2454592::champion::1::0::0 2057::John Burnett::117 Green st.::Gladewater::tx::75647::9039188083::Bigjohn_106@hotmail.com::Field Work::http://::CP Technician With Associates of Corrosion Tech. ::Nace CP Level I cert and 2yr experience::I’ve received an associated degree in Corrosion Technology with Kilgore College and a level I CP certification.

I’ve been trained in internal, atmospheric, and cathodic protection tools and formulas to perform the necessary tasks to provide for integrity management. I’m currently working with, Coast to Coast LLC, an ICDA, ECDA, and SCCDA company.

I’m looking for a company that will allow me to continue growth in the corrosion field, through education and experience. A formal resume and the course syllabus from the corrosion technology classes are available upon request. ::Mar 4, 2008::Apr 4, 2008::2454561::jb0211::1::0::0 2055::Robert::3202 lapham dr::Harrison::mi::48625::989-429-3215::robert_sims21@hotmail.com::Inspection&&Field Work::http://::Corrosion Technician/Field Work ::Motivated worker looking to expand my knowledge in the corrosion field::Robert Sims
3202 Lapham Harrison MI 48625
989-429-3215

Objective: I’m looking for employment with exciting tasks and possible room for advances.

Experience:
Hanson Survey &Design Houston, TX
832-327-2216 4/06- Present
Close Interval Survey Foreman, Line Locator, and Wire Technician- completed safety checks on high pressured gas lines.

Doherty Hotel Clare, MI 989-386-3441 7/04- 4/06
Waiter/ Bartender- served food and beverages, delivered room services, provided customer service

Mears Engineering Rosebush, MI 989-433-2929 1/04- 7/04
Driller, wire technician, water packer, and traffic control- assisted in completion of safety checks on high pressured gas lines.

Quality Construction Harrison, MI 989-539-6084 3/03- 1/04
General Laborer- Helped build additions, roofed houses, and remodeled interior and exterior of homes.

Education:
High School Diploma Harrison High May, 2001

Reference:
Eric Wittig Mathematic Professor 989-429-7658

Laurie Booth Direct Care Supervisor
989-539-6084

Eric Herron Corrosion Technician 713-725-7559

Anthony LaPorte ITT Recruiting Manager 850-777-4100

NCCER Operator Qualifications:
*Conduct Close Interval Survey
*Prevent Pipeline Damage
*Cathodic Protection Measurement
*Test and Repair Shorted Casings
*Maintain and Repair Rectifiers
::Mar 2, 2008::June 3, 2008::2454621::1166::1::0::0 2054::dustin bergey::125 n lake street::harrison::mi::48625::989 429 6351::dustinbergey@aol.com::Inspection&&Field Work&&Miscellaneous::http://::Position Desired: Corrosion Tech/Surveyor ::Over 7 years experience in Cathodic Protection, DCVG, CIS..etc:: I have been working in the field performing Close Interval Surveys, Direct Current Voltage Gradient Surveys, GPS surveys, and many also other surveys in the same field. I have been a foreman/supervisor for more than 5 years in the field. I am currently looking for work in the same general field dealing with Cathodic Protection. I am drug free and I have all OQ qualifications needed to performs surveys and inspect/repair/read rectifiers as well. feel free to contact me for a full resume including job history and references. thank you for your time.

DUSTIN M. BERGEY

7140 N CLARE AVE · HARRISON MI 48625
989 429 6351 · DUSTINBERGEY@AOL.COM

OVERVIEW

Over (7) years of experience in the oil and gas field of corrosion and Cathodic Protection business. Experience and Skills have touched many facets of the Oil Field production business(i.e. operations, sales, service, and technical). Experience in water production and treatment facilities Cathodic Protection systems.

I am seeking a position which includes responsibilities related to corrosion prevention duties. Including Cathodic protection, internal corrosion control, atmospheric corrosion control, and protective coating and linings.

Highly motivated and responsible employee recognized for:
• Commitment and Reliability/Perfect Safety Record
• Hardworking
• Strong communication skills
• Client relations
• Creative problem solving skills
• Computer skills Power Point, Excel, Word, etc.


EDUCATION

Harrison High School Graduate -Diploma

FUNCTIONAL SUMMARY
I am a self motivated employee. In the past seven(7) years I have been a foreman/crew leader/field supervisor for over five(5) years. I have been in charge of crews from as little as three(3) and as large as eleven(11) workers at one time. I have performed all types of survey and testing/troubleshooting for Cathodic Protection systems all over the country. I have always had good client relations, and I have always been able to keep the job cost at a minimum.


SUMMARY OF OPERAT0R QUALIFICATIONS (NCCER)

Corrosion Prevention Field Technician 2
*Check for Proper Operation of a Rectifier (3.2)
*Troubleshoot Rectifier Bond Connections (4.1)
*Test to Detect Interference (1.3)
*Conduct Close Interval Survey (1.2)

Corrosion Prevention Field Technician 1 - Installation V4
*Inspect for External Corrosion on Buried or Submerged Pipe (5.2)
*Inspect for Physical Damage on Buried or Submerged Pipe (5.1)
*Inspect the Condition of External Coating on Buried or Submerged Pipe (5.3)
*Apply Atmospheric Coating (7.5)(7.6)(7.7)
*Prepare surface for atmospheric coating (7.2)( 7.3)(7.4)
*Install Test Leads by Exothermic Welding and other Methods (2.3) (2.4)
*Repair Damaged Test Leads (2.2)
*Insert and Remove Coupons (10.1)
*Prepare surface for coating by abrasive blasting (13.3)
Abnormal Operating Conditions - General Pipeline V2
*Abnormal Operating Conditions (General)

Corrosion Prevention Field Technician III
*Install Bonds (9.1)
*Install Impressed Current Ground beds (9.4)
*Adjustment of Rectifier (4.3)
*Install Rectifiers (9.3)

Corrosion Prevention Field Technician 1 - Measurement
*Check for Proper Operation of a Rectifier (3.2)
*Measure Structure to Soil Potentials (1.1)
*Obtain a Voltage and Current Output Reading from a Rectifier (3.1)
*Troubleshoot Rectifier Bond Connections (4.1)


EMPLOYMENT

Jan. 2006 - present (Laid off) Hanson Survey & Design Houston, TX
Crew leader
*Oversee and perform CIS surveys, DCVG surveys, GPS surveys, and troubleshoot problems in Cathodic Protection systems, inspect tank yards, inspect storage fields

Feb. 2003- Dec. 2005 Allied Corrosion Industries Marietta, GA
Field Supervisor
*Perform CIS, DCVG, DOC, ECDA, and Soil Res surveys
*Install and troubleshoot groundbeds and impressed anodes.
*Install/Inspect/Troubleshoot Rectifiers
*Tank Inspection

Oct. 2001- Dec. 2002 Hanson Survey and Design Houston, TX
Crew leader
*Perform CIS, DCVG surveys

Jan 2001- Oct 2001 Mears Engineering Rosebush, MI
General Laboror
*Locate Pipelines, Perform CIS, DOC, Soil Res, and GPS surveys.
*Install & Replace Pipeline Signs and Markers

Oct. 1999- Dec. 2000 Biewer Sawmill Mcbain MI
Genaral Laborer/Chop Saw Operator

REFERENCES

Pete Hanson- Hanson Survey and Design (Owner- Operations Manager)
888 327 2216 office 713 703 5503 cell

Richard Baxter- Hanson Survey and Design (Data processor)
888 327 2216

Carol Kimbley- Hanson Survey and Design (Office manager)
888 327-2216

Rob Worden- Allied Corrosion Industries (Operations Manager-CIS)
770 425 1355 office 678 794 7643 cell

Gordon Carson- Allied Corrosion Industries (FT. Worth, TX Manager)
281 757 6951

Shelly Wiles- Allied Corrosion Industries (Data processing)
800 241 0809

::Apr 16, 2008::June 3, 2008::2454621::7151::1::1::0 2053::Eric Herron::413 Fairlane St::Harrion::MI::48625::713-725-7559::eherronhsd@aol.com::Sales&&Management&&Certified or Licensed&&Inspection&&Field Work::http://::Supervisor in corrosion field ::Looking to expand my knowledge in the corrosion industry::
Eric D. Herron
413 Fairlane st
Harrison , MI
(713)725-7559 Or (989)539-3845
E-Mail:eherronhsd@aol.com



Objective: A long term career in the corrosion industry utillizing my budgeting, sales, and field knowledge.

Experience

09/2006 - Present Hanson Survey & Design, LLC
Houston, TX

Foreman

CIS, DCVG Surveys, interference, influence testing, location/depth, GPS, waterway, budgeting, sales boat/swamp buggy surveys, analysed data, supervisor of multiple crews.

2005- 09/2006 Beckman LLC INC.
Harrison, MI

Industries/Dart, drilled oil wells, serviced operating oil wells, replaced rod strings/tubing, bleeding down H2S wells, worked for many hours in SCBA equipment , rig maintenance, Rig and Derrick Hand, capped off/ plugged wells, shot new perforations, replaced casings, fractured new formations, pressure tested pipe, ran high pressure pumps, helped run a hot oiler unit, set and retrieved fishing tools, set cement retainers, operated rig for a short time.

2005–12/2005 Allied Corrosion Industries
Harrison, MI

Foreman

CIS, DCVG Surveys, line locating/depth survey, soil resistivity testing, installed deep well ground beds, conventional ground beds, installed rectifiers, influence and interference testing, AutoCad, set up jobs, helped with bids, foreman over multiple crews.

2004-2005 Henkels and McCoy
Richmond, VA

Foreman

Foreman over the vacuum truck, gas And water leak repair, truck maintenance, Corrosion Tech, located shorts, installed anodes/bonds, performed annual surveys, operated backhoes, gas leak detection surveys, AutoCad, took measurements to plot new line installation, Annualls surveys, serviced rectifiers, installed sacrificial anodes for the City of Richmond, VA., supervised multiple crews.

2003-2004 Hanson Survey and Design
Houston, TX

Foreman

Performed CIS, GPS, Depth surveys, DCVG, Ground bed instillization, Soil Resistivity, Pierson Survey, ACVG, Current Mapping, Annualls, Rectifier Maintence and sale bidding, budgets supervised maltiple crews.

1999-2004 Mears Enginering
Rosebush, MI

Foreman

Performed CIS, GPS, Depth to Cover surveys, Annual survey, Persion survey, Rectifier mantince, Soil recitivity testing, tested for casing shorts, Curent maping, DCVG, bids, coating inspections, budgets and Leading up to 30 Man crews .

References:

Peter Hanson – Hanson Survey & Design, LLC – (832) 327-2216
Jeff Foose - West Shore Pipeline -(815)693-0437
Jackie Spires - Plains Pipeling - (325)650-8089
Dan Ruane – West Shore Pipeline – (847) 439-0270 ext. 210
Robert Gilmister – Plains Pipeline - (307)262-7797
Klemmer – Northern Natural Gas – (507) 456-1137

Education Graduated from Harrison High School 1999
Also NCCER OQ Qualified and Vero Force



::Mar 17, 2008::Aug 3, 2008::2454682::701::1::2::0 2051::Azaz::Shiyapura, Raopura, ::Baroda, Gujarat, India::Gujarat::390001::009657276139::m_azzu@yahoo.com::Management&&Office&&Intern&&Engineering&&Certified or Licensed&&Inspection&&Field Work&&Miscellaneous::http://::Cathodic Protection Technologist / Engineer ::NACE Certified Cathodic Protection Technologist (Level 3) ::CURRICULUM VITAE


MEMON AZAZ MOHD. YUNUS,
Electrical Engineer & NACE Cathodic Protection Technologist (Level 3) # 9831.

DESIRED JOB / POSITION:

Cathodic Protection Engineer & Technologist.

CAREER SUMMARY:

Over 7 years of active experience in the various fields of cathodic protection systems in various environments like Oil & gas fields, Cross country pipelines, vessels / tanks and gas storage bullets, Refinery complexes, Fertilizer plants, Power plants, Chemical plants, City gas distribution, Complex pipeline networks, Off shore facilities (jetty bridges & piles, offshore pipelines, etc.), reinforced concrete structures, etc. in various countries starting from Bidding, Pre design survey and Design data collection right up to Design, Material specification & Procurement, Installation, Testing & Commissioning, Monitoring & Maintenance, Pre & Post Commissioning Surveys like On-Off, DCVG, CIPS, Pipeline health & PSP, Trouble shooting, etc. for Impressed Current as well as Sacrificial Cathodic Protection systems.

KEY SKILLS:

Design of cathodic protection system:
Impressed current & sacrificial anode cathodic protection system for cross country pipelines, plant facilities, tank bottoms, off shore facilities, mounded storage bullets, etc. (new as well as upgradation of existing systems)

Installation:
Deep & shallow anode ground beds, anode flex, sacrificial anode installation (Prepackaged Mg, Zinc ribbon, Aluminum for water tanks and offshore), junction box, bonding box, test stations, solar systems, MMO anode mesh installation for tank bottoms & steel reinforcement in concrete, etc.

Survey:
Soil resistivity, PSP (On-Off), CIPL, DCVG, current drain & demand survey, trouble shooting related surveys, pre-design survey, etc.

Testing & Commissioning:
Impressed current c. p. system (deep ground bed, shallow ground bed, MMO mesh anodes, Anode flex, etc., Sacrificial anode c. p. system (land / aqueous / marine environment including Zn, Mg & Al), Solar systems and upgraded c. p. systems.

Troubleshooting:
Cathodic protection system (impressed current & sacrificial anode) for on shore and off shore facilities, transformer rectifier, current distribution, low protection areas., etc.

Monitoring and maintenance:
C. P. system for plant facilities, under ground pipeline networks, isolated pipelines, tank bottom & internals, solar systems etc.

Pricing & commercial tendering:
Cross country isolated pipelines, tank bottom as well as internal & plant facilities.

Environments worked in:
Cross country pipelines, Fertilizer plants, Refinery complex, Oil & Gas fields, Power Plants, Chemical plants, Off shore areas, City gas distribution networks, etc.

OBJECTIVE:

Having gained the various skills & been exposed to an environment where in stringent quality systems are adhered to or friendly & favorable atmosphere, I look forward for a challenging & creative long term assignment which broadens my knowledge & experience and help me becoming a practical & successful cathodic protection engineer with a professional company which offers a rewarding career utilizing the knowledge, experience & skills I currently possess for mutual growth, development & success in the cathodic protection global market.

EMPLOYEMENT HISTORY:

Please note: The detail information of executed projects and experience can be presented upon request as and when required.

SR. NO. COMPANY WORK LOCATION EMPLOYMENT DURATION POSITION HELD
1
Rawabi Corrosion Technology Company (formerly ABACORP), Al Khobar, Kingdom of Saudi Arabia.
State of Kuwait November’ 2006 onwards Cathodic Protection Technologist
2
BAC Corrosion Control, UK & MEECC (Middle East Engineers and Corrosion Control) - JV, Doha, Qatar.
Republic of Yemen Call out (July to September’ 2006) Cathodic Protection Engineer
3
SPECIALIZED OIL & GAS ENGINEERING COMPANY – SOGEC (Cathodic Protection Services division of Kabbani Construction Group), Dammam, Kingdom of Saudi Arabia.
Kingdom of Saudi Arabia From April’2004 to June’ 2006 Cathodic Protection Engineer
4
CONSULTECH, Cathodic Protection Engineers, Baroda, India
India January’ 2001 to April’ 2004 Cathodic Protection Trainee & Engineer

EDUCATIONAL DETAILS & CERTIFICATION:

SR. NO. UNIVERSITY / INSTITUTE YEAR
DEGREE / CERTIFICATION

1
BVM Engineering College, Sardar
Patel University, Gujarat (INDIA).
2000 Bachelor Degree of Electrical Engineering
2
National Institute of Information
Technology (NIIT), Baroda, INDIA.
2001 Softwares i.e. SQL 7.0,C++, FoxPro and MS Office
3
State Govt. Institute, Gujarat, INDIA.
2002 License of electrical Supervisor
4
National Association of Corrosion Engineers – NACE International, USA.
2006 NACE Certified Cathodic Protection Technologist (Level 3) # 9831


PERSONAL DETAILS AND CONTACT INFORMATION:

Name : Memon Azaz Mohd. Yunus.

Permanent Address : Shiyapura, B/h Gujarati School, Raopura, Baroda 390 001.
GUJARAT – INDIA.

Present Address : Mangaf, Kuwait.

Phone No. : Cell. +965 7276139
: Res. +965 3734701

Email Id. : azaz5116@gmail.com /
m_azzu@yahoo.com /
memon_azaz@hotmail.com


Passport No. : A – 9713513.

Driving License : Valid Indian, Saudi & Kuwaiti (GCC) Motor Car driving license.

Date of Birth : 12th Nov’1979.

Nationality : Indian.

Community / Religion : Muslim (ISLAM).

Marital Status : Married (1 child).

Languages Known : English (Excellent – Read, write & speak),
Hindi (Good – Read, write & speak),
Urdu (Good – Read, write & speak) &
Arabic (Beginner).


Thanks,


Yours friendly,

Memon Azaz.
::Feb 24, 2008::May 27, 2008::2454614::humera::0::0::0 2050::dustin bergey::7140 n clare ave::harrison::mi::48625::8::dustinbergey@aol.com::Inspection&&Field Work&&Miscellaneous::::Position Desired: Corrosion Tech/Surveyor ::1:: 2::Feb 22, 2008::Mar 24, 2008::2454550::7151::1::0::0 2049::Joshua Beckwith::4695 E. Arnold Lake Rd::Harrison::MI::48625::989-429-4389::joshua_beckwith@hotmail.com::Inspection&&Field Work::http://::Position Desired: Corrosion Technican ::Qualified CIS Foreman::3yrs field experience in Cathdic Protection Pipe to Soil Survey.
I have my Operator Qualifications from the NCCER
Currently employed as a Foreman for a Survey Company out of Houston, but looking for a career with more room to grow. ::Feb 19, 2008::May 22, 2008::2454609::juliat::0::0::0 2048::Dee Lawrence:: Cal Young Road::Hallsville::Tx::75650::903-660-3991::hdlawrence@charter.net::Certified or Licensed::http://::Position Desired: Manager Corrosion Control ::NACE Corrosion Technologist::H. Dee Lawrence - NACE Corrosion Technologist
613 Cal Young Road, Hallsville, TX 75650
(903) 660-3991
HDL613@cs.com

OBJECTIVE

Submitting my resume for consideration of System Corrosion Leader job with your company.

CERTIFICATION

NACE Certified Corrosion Technologist # 3394,1987.
Pursuing senior technologist certification via parallel path chemical treatment courses.

EMPLOYMENT

April 1,2005 - Present.
Duke Energy Field Services, Carthage, Texas
Corrosion Technician II - April 2005 to Present

1989 - March 31,2005. Mergers of same company.

Gulf South Pipe Line Company, LP , Carthage, Texas
Corrosion Technologist - January 2000 to March 31,2005.
Job Description: Design, implement, and monitor C.P. program, internal program, atmospheric program, and provide documentation for DOT Title 49,
Part 192,Subpart 1.

Koch Gateway Pipe Line Company, Carthage, Texas
Corrosion Technologist - December 1992 to December 1999.
Job Description: Same as above.

United Gas Pipe Line Company, Carthage, Texas
Corrosion Technologist - December 1991 to November 1992.
Job Description: Same as above.

United Gas Pipe Line Company, Monroe, Louisiana
District Corrosion Supervisor - January 1989 to November 1991.
Job Description: Direct, supervise, and coordinate assignments of corrosion personnel. Provide support, training, utilize knowledge of DOT Title 49,Part 192,Subpart 1,and company O&M procedures as they pertain to corrosion control of pipelines.

1984-1988

Fina Oil and Chemical Company, Midland, Texas
Corrosion Technologist, West Texas District, January 1984 to December 1988.
Job Description: Established formal corrosion tracking system, work directly with chemical companies on chemical treating programs for water injection, down hole systems, and the optimizing of those programs through quarterly reviews.

1978-1988

Eastman Kodak, Longview, Texas
Analytical Lab Special Analyst, worked under analytical chemist.
Job Description: Worked with UV, IR, GC, LC, and wet chemistry lab procedures.

EDUCATION

University of Texas at Tyler, Tyler, TX. Bachelor of Science, Technology,
Cum Laude (Honors), December 2003.

Kilgore College, Kilgore, TX. Corrosion Technology, 1981 - 1983.

Kilgore College, Kilgore, TX, 1971 - 1973. Associate of Science, 1975.

Gladewater High School, Gladewater, Texas. Graduated upper 10% of class, Eagle Scout.

COMPUTER

Bass CPDM, Microsoft Outlook, MS Excel, MS Word, Delorme - Earthmate (GPS).

Resumehdl5.txt

::Feb 16, 2008::May 19, 2008::2454606::HDLodn1700::1::0::0 2047::Rami Dawodi::918 Chase Lock Dr::Bacliff::TX::77518::8327664279::rdawodi@techcorr.com::Computer&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work::http://::CP2 Technician ::CP2 Technician::918 Chase Lock Dr
Bacliff, TX 77518
(832) 766-4279

Objective:
Seeking a career in the field of Cathodic Protection. Have interest in, but not limited to, CP system design, installation, surveying and monitoring.

Education:
B.S. in Engineering (Mechanical)
Minor in Mathematics
LeTourneau University
Longview, TX
1995-1998

Kilgore College
Kilgore, TX
1993–1995

Certifications & Training:
* CP1 (CP Tester), Nace, July 2007
* CP2 (CP Technician), Nace, February 2008
* Ultrasonic Testing LII, NDT Training Center, January 2008
* Magnetic Particle Testing LII, NDT Training Center, December 2007
* Penetrant Testing LII, NDT Training Center, December 2007
* RFT Testing LII, Technical Tool Box, September 2007
* Radiation Safety – Lamco & Associate – April, 2006
* AutoCAD Drafting – San Jacinto College, August 2006
* Technical Drafting – San Jacinto College, August 2006

Skills Profile:
Computer: AutoCAD, NX4,Excel, Microsoft Word, Access, ArcGis, PICS, GPS Pathfinder Office, PC Repair and Networking.

Computer Programming: VB.net, C++, and Java.

Engineering: Familiar with various principles of chemistry, physics, mathematics, thermodynamics, fluids and material science.

Work Experience:
2006-Current, TechCorr, Houston, TX
CP2 TECHNICIAN / NDT TECHNICIAN / DRAFTING

* Perform close interval survey (CIS), pipeline current mapping (PCM), direct current voltage gradient (DCVG) testing, and alternating current voltage gradient (ACVG) on high-pressure pipelines.
* Align survey data utilizing several software packages including PICS, BlueSky (Align DB), proactive, ArcGIS, GPS Pathfinder, AutoCAD, and other in-house macros.
* Provide assistance to senior engineers in preparing ECDA and other over the line survey reports.
* Familiar with the design and operation of a variety of CP-related survey equipment, including MCMiller G1 and DA meter Data Loggers.
* Perform Ultrasonic, Magnetic Particle, and Penetrant Testing on tanks, pressure vessels, and piping.
* Assist field technicians in performing Guided Wave and Automatic Ultrasonic examinations on above and below ground piping.
* Gather field data, write reports, create spreadsheets, databases, and generate AutoCAD sketches on inspected equipment.
* Generate isometric drawings of piping.

1998-2004/2005-2006,Longview Inspection, Houston, TX
COMPUTER TECH / DRAFTING / INSPECTION

* Assist field technicians in performing several types of non destructive examinations such as Ultrasonic, Magnetic Particle and Penetrant examination on boilers (power and recovery), as well as pipes, tanks and pressure vessels in several paper mills and power plants throughout the United States.
* Gather field data, write reports and build spreadsheets using `several programs such as Word, Excel, and Adobe Photo Shop.
* Sketch and draw pieces of equipment using AutoCad.
* Generate corrosion rate and remaining life reports using several years of field data.
* Manage the computer department and maintain the network system.
* Assemble and repair computers. Install and troubleshoot software.
* Write programs in Visual Basic.

2001–2002,Hunt Refining Oil Company, Tuscaloosa, AL
COMPUTER TECH / DRAFTING / INSPECTION

* Assisted an API inspector to systemize and circuitize the piping system at the refinery.
* Walked down pipe lines, created pipe ISOs and drew miscellaneous equipment’s using AutoCad.
* Performed non destructive examinations such as Ultrasonic, Magnetic Particle and Penetrant examination.
* Generated corrosion rate and remaining life reports using several years of field data.

Additional Experience:
STORE OWNER / MANAGER

Gained valuable experience in the logistics of owning and operating a local business. Job responsibilities included managing the books, providing customer service, inventory pricing along with supervising and training employees.

References:
Personal and professional references are available upon request.::Feb 14, 2008::May 17, 2008::2454604::mrbee00::0::0::0 2046::mike devito::104 denio street::vallejo::CA::94590::707-980-3880::mkdevito@yahoo.com::Inspection::http://::Position Desired:Coatings Inspector ::Certified Coatings Inspector:: Michael J. Devito
104 Denio Street
Vallejo, CA. 94590
Home: (707) 552-3257
Mobile: (707) 980-3880
E-Mail: mkdevito@yahoo.com

Certified Coatings Inspector/Project Manager/Superintendent

Professional Training/Certifications
NACE Certified Level 3 #9247
SSPC NAVSEA Trained Level 1 #20105
C-3 Lead Abatement Competent Person Trained

Objective:
To be a Productive Part of an Organization Where I Can Contribute My Knowledge in Craft Supervision, Safety, Inspection, Project Management, Business Ethics, Communication and Negotiation Skills.

Work History

Nov.07- Present: West Coast Coating Consultants
743 Spruce Street
Berkeley, CA. 94707
Coatings Inspector
Project Manager

June 07- Nov. 07: Universal Inspection Group
Bakersfield, CA. 93309
Coatings Inspector

Feb. 07 – June 07: Purcell Painting & Coatings
6456 South 144th Street.
Tukwila, WA. 98168
Lewis & Clark Bridge Longview, WA.
Quality Control Manager
Site Safety Manager

May 06 – Feb. 07: Certified Coatings of California
1045 Detroit Ave.
Concord, CA. 94518
Golden Gate Bridge San Francisco, CA.
Site Superintendent

Nov. 05 – May 06: Long Painting Company
1133 Kent Ave.
Kent, WA.98205
Golden Gate Bridge San Francisco, CA.
Quality Control Manager


Jan. 83 – Nov. 05: Jeffco Painting & Coating Inc.
Mare Island Vallejo, CA. 94590
Apprentice Painter/Sandblaster
Journeyman Painter/ Sandblaster
Project Foreman
Field Superintendent



25 Years Experience in all Phases of Industrial, Commercial, Residential Painting and Sandblasting.

Experience


West Coast Coating Consultants

Coatings Inspector/Project Manager performing Coatings Inspections, Coatings Surveys and Failure Analysis for sandblasting and painting projects in the Industrial and Marine Industry.

Universal Inspection Group

Coatings Inspector assigned to painting and sandblasting projects for the affluent oil companies in the Bakersfield, CA. area.

Purcell Painting and Coating Inc.

Quality Control Manager/Site Safety Manager on the Lewis and Clark Bridge Painting Project performing surface preparation and coating inspections along with safety inspections, safety training, inventory of paint, tracking batch numbers and expiration dates, lead monitoring, and keeping communication with the Washington State Bridge District Inspectors.

Certified Coatings of California

Site Superintendent for the” Golden Gate Bridge Retro Fit Painting Project” supervising thirty to thirty five painters and sandblasters, conducting routine evaluations, safety training, scheduling crews, ordering and keeping inventory of supplies, sundries, and tracking time cards.


Long Painting Company

Quality Control Manager on the “Golden Gate Bridge Retro Fit Painting Project”
Performing surface preparation and coating inspections, lead monitoring, inventory of paint, tracking batch numbers and expiration dates, along with keeping communication with the Golden Gate Bridge District Inspectors.

Jeffco Painting and Coating Inc.

Foreman/Field Superintendent supervising crews from one to twenty painters and sandblasters assigned to sandblasting and painting projects in the surrounding oil refineries, water treatment plants, sewage treatment plants, overpasses, and bridges in the San Francisco, CA. Bay Area.


Experienced in Conventional, Airless, and Plural Component Spray Equipment

Experienced in all phases of Sandblast Equipment

Experienced in Water blasting, High Pressure and Ultra High Pressure Water Jetting

Experienced in most types of coatings:
Acrylics, Alkyds, Silicone Alkyds, Epoxies, Coal Tar Epoxies, 100% Solids Epoxies, Urethanes, Polyurethanes, Phenolics, Vinyls,
Inorganic and Organic Zincs, Enduraflex,
Polyester Fiberglass Liners, Fireproofing, Waterproofing, Chlorinated Rubber

Education

St. Mary’s College High School 4 years

St. Mary’s College Business Management 1 year

Painter’s Union Apprenticeship 3 years

NACE Certification Training

SSPC NAVSEA Training
::Feb 12, 2008::May 15, 2008::2454602::paisan::0::0::0 2045::Mark McMinn::6982 Caves Rd::Maquoketa::IA::52060::563-652-4225::mcminn53@prestontel.com::Engineering&&Certified or Licensed::http://::Position Desired: Corrosion Supervisor ::2008 Corrosion Resume_CJ::mcminn53@prestontel.com
Career Profile
Over Thirty years field experience in Corrosion Control and Pipeline Operations. Providing overall guidance in the carrying out of the corrosion control programs and providing technical support and training to field personnel responsible for maintenance of field equipment, including groundbeds, rectifiers, test equipment, corrosion coupon installations, failure analysis and investigation, coating evaluation and repair. Construction inspection, commissioning of facilities along with contractor/contact qualifications and quality. Directed and/or analyzed more than 1,000 miles of close-interval, surveys, Pearson surveys, pipeline current mapper (PCM), ACVG, and DCVG surveys. Experience with HVAC and HVDC testing, data analysis and mitigation. Investigation of new technology, equipment and materials. Four years field experience
with gas compressor operations, maintenance and process facilities. Strong background with DOT part 192,195 and part 191.

Work History
2005 to Present Alliance Pipeline, L.P.
Corrosion Specialist providing supervision, leadership, technical support, and training for Corrosion Technicians in the Alliance System. Responsible for the proper design, installation, operation, and maintenance of cathodic protection equipment and corrosion control facilities on natural gas and liquid pipeline systems within Alliance Pipeline. Manage/coordinate system projects pertaining to corrosion control and pipeline integrity. This includes development, job scope, design, economic analysis, bid letting, installation, inspection, and completion. Participate in regulatory and company inspections/audits. Assist with the management of the Alliance pipeline integrity program.
Assist with the development and management of operating and capital budgets. Evaluation of new
technology and equipment in the corrosion control industry.

1999 to 2005 Alliance Pipeline, L.P.
Field Technician - US Corrosion Lead accountability for the overall guidance for the operating teams in carrying out of the corrosion control program. Provide interpretation of D.O.T., State and company regulations / procedures. Insure that all installations are within NACE and company standards. Development and updating DOT operator qualification program, employee training matrix, Integrity Management Plan and operating procedures. Assist in planning, material requisition, documentation and
field supervision of new projects and work orders. Provide new corrosion research data for designing new installations. Prepare special reports that document and/or make recommendations regarding the results of special projects or surveys. Conduct facility inspections, review of records and distribute report of findings to management. Prepare, review documentation for DOT audits. Development of Integrity Management Plan relating to ECDA, ICDA, SCCDA and CDA. Budgeting and preparation of AFE's and RFC's for specific projects along with contractor selection and review. Preparation of work packages and job scopes working closely with Engineering and/or Technical Services.

1993 to 1999 Kinder Morgan Energy Partners, L.P.
Division Corrosion Supervisor providing supervision, leadership, technical support, and training for Corrosion Technicians in the Alliance System. Responsible for the proper design, installation, operation, and maintenance of cathodic protection equipment and corrosion control facilities on liquid pipeline systems within Kinder Morgan. Manage/coordinate system projects pertaining to corrosion control and pipeline integrity. This includes development, job scope, design, economic analysis, bid letting, installation, inspection, and completion. Participate in regulatory and company inspections/audits. Assist with the management of the Kinder Morgan integrity program. Assist with the development and management of operating and capital budgets. Evaluation of new technology and equipment in the corrosion control industry.

1991 to 1993 Enron Gas Pipeline Group
Project Engineer- Internal Corrosion, responsibilities included providing expert services for the development and implementation of external and internal corrosion control programs. Recommend programs, procedures and practices for corrosion control with implementation assistance to field operations staff.

1989 to 1991 Houston P/L Company (Enron Corp.)
Regional Corrosion Specialist providing technical support for the maintenance of field equipment and offshore facilities, including groundbeds, rectifiers, corrosion coupons, etc. Assist in planning material requisition, documentation and field supervision of new projects and work orders. Provided training for field personnel on new
equipment, systems and assist field personnel in conducting special work projects or surveys.

1987 to 1989 Northern Natural Gas Company
Operator II responsibilities included the safe and efficient operation of the district compressor plant on an independent assigned shift.

1979 to 1987 Northern Natural Gas Company
Field Technician providing internal and external corrosion control service on underground storage, transmission and gathering pipeline facilities related to operation, maintenance, modification or construction within the district.

1979 to 1979 Northern Natural Gas Company
Operator I performing operational and minor maintenance activities at the district compressor station.

1978 to 1979 Northern Natural Gas Company
Maintenance Person performing inspection, maintenance and repair on plant and pipeline facilities.

EDUCATION
B. S. in Health & Physical Education and Industrial Technology – Oklahoma University Panhandle State
Accredited Senior Corrosion Technologist #04378 - National Association of Corrosion Engineers International.



::Jan 30, 2008::May 2, 2008::2454589::rustbuster::0::0::0 2044::brian stirling::107 island bay::freeport,grandbahama::Fl::33309::12423750810::brianstirling28@hotmail.com::Inspection::http://::Position Desired: ::SUPERVISION/INSPECTION::
I have been in the Coating Industry for over 25 years , 12 of which have been Supervision and Management.
I have worked on various projects throughout the world, ranging from Norwegian Oil and Gas Refineries and Oil Rig Construction Yards, North Sea Oil Platforms, U.K. Oil Rig Construction Yards and Shipyards, Qatari Pipeline Projects to my current position as Marine Coating Manager in the Grand Bahama Shipyard, working on a vast array of vessels from Cruiseships to RO-RO, s, Cargo ships and Tankers.
I am now looking to break into the inspection side of the industry, and hold my NACE LEVEL 1 C.I.P and i am doing my LEVEL 2 on the 9th March in NEW ORLEANS.
If you require my C.V. at any time please dont hesitate to get in touch.

Regards

BRIAN STIRLING ::Jan 23, 2008::Feb 23, 2008::2454520::bahama::1::0::0 2043::Mohamad Sobri Omar::No. 15 Jalan Cecawi 6/14, Kota Damansara::Petaling Jaya, Selangor, Malaysia::My::47810::+60 13 4283008::sobri@pipecare.com.my::Engineering::http://::Position Desired: Senior Cathodic Protection Engin ::Senior Cathodic Protection Engineer::Experience Summary

Cathodic Protection : Experienced in design, installation and commission of
Sacrificial and Impressed Current cathodic protection
systems for all type of structures, onshore and offshore.

Professional Experience

PipeCare (M) Sdn. Bhd. - Present
Position : Cathodic Protection Specialist

P.T. Wilson Walton Indonesia, Indonesia – 1996 to 1997
(Corrpro Inc. USA)
Position : Technical Advisor
Responsible for the overall sales and engineering activities for P.T. Wilson Walton and it’s local agents in Indonesia. In addition to working on corrosion control / cathodic protection responsibilities include co-ordination of project scheduling, project administration and overall management of the P.T. Wilson Walton engineering operation in Jakarta, Indonesia.

Harco Pacific Technologies Pte. Ltd. - 1992 to 1996.
(Corrpro Inc. USA)
Position : Indonesia & Malaysia Country Manager

Responsible for the overall sales and engineering activities for Harco local agents in Malaysia. In addition to working on corrosion control / cathodic protection responsibilities include co-ordination of project scheduling, project administration and overall management of the Harco engineering operation in Malaysia.

Summary of Major Projects

Petronas Penapisan Sdn Bhd, Kerteh, Terengganu
Installation and commissioning of an automatic potential control impressed current and magnesium anode cathodic protection systems for internal water tanks and vessels - 1988.

Esso Production Malaysia Inc., Kemasek, Terengganu
Installation and commissioning of an impressed current Anodeflex system for the T-445 crude oil storage tank bottom plate at the Terengganu Crude Oil Terminal, Kerteh, Terengganu - 1989.

PT. Jasa Marga, Pontianak and Ujung Pandang bridges, Indonesia.
Design, supply of materials and commissioning of impressed current cathodic protection systems for bridge piling in Pontianak and Ujung Pandang, Indonesia - 1992.

Abu Dhabi National Oil Company, Abu Dhabi, United Arab Emirate
Overline potential survey (CPL) for 160 Km 20” and 12” pipelines from Abu Dhabi to Al Ain in 1992.

PT. Semen Padang, West Sumatra, Indonesia.
Design, supply of materials and equipment, install and commissioning of an impressed current cathodic protection systems for two (2) jetties in Teluk Bayur, Padang, Indonesia - 1992.

Virginal Indonesia Company (VICO), Jakarta, Indonesia.
Design and supply of material and equipment for Badak project in Bontang, East Kalimantan, Indonesia - 1993.

Pertamina Unit IV, Balik Papan, Indonesia.
Design supply of material and equipment for 234 Km 20” crude oil pipeline from Tanjung to Penajam, East Kalimantan, Indonesia - 1993.

PT. Badak NGL Co., Bontang, East Kalimantan, Indonesia.
Design, supply of material and equipment , installation and commissioning of mixed metal oxide deep well anode impressed current cathodic protection system for 57 Km 36” Gas pipeline from Muara Badak to Bontang, Indonesia - 1993.

Pertamina Dumai, East Sumatra, Indonesia.
Design, supply of material and equipment, supervision of installation and commissioning of an impressed current CP system for loading jetty in Dumai, Indonesia - 1993.

PT. Tranaco / Pertamina Surabaya, Indonesia.
Design, supply of material and equipment, install and commissioning of impressed current CP systems for 71 Km gas pipeline from Porong to Gresik, Surabaya, Indonesia - 1993.

PT. Trihasra Bimanusa Tunggal, Jakarta, Indonesia.
Design review, supply of material and equipment, installation and commissioning of impressed current CP systems for the 211 Km 16” gas pipeline from Balongan to Jakarta, Pertamina West Java Gas Pipeline, West Java, Indonesia - 1994.

PT. Badak NGL Co., Bontang, Indonesia.
Design, supply of material and equipment, install and commissioning of impressed current CP systems for Qutfall Canal sheet piling in Bontang Gas refinery, Bontang, Indonesia - 1994.

Esso Production Malaysia Inc., Kerteh, Terengganu, Malaysia.
Survey and monitor Terengganu Crude Oil Terminal and Slug Catcher cathodic protection systems in Kerteh, Terengganu, Malaysia - 1994.

Petronas Carigali Kerteh, Terengganu, Malaysia.
Design, supply of material and equipment, installation supervision and commissioning of impressed current CP systems for the Import and export pipelines and fire water pipelines in OGT, Kerteh, Terengganu, Malaysia - 1994.

Petronas Penapisan Sdn Bhd, Terengganu, Malaysia.
Inspection and rectification of internal tanks D-960 and D-990 impressed current cathodic protection systems at Petronas Penapisan Refinery, Kerteh, Terengganu - 1994.


Shell Timur Sdn Bhd, Sabah, Malaysia.
Inspection and monitoring of LPG Vessels impressed current cathodic protection system at Sapangar Bay Installation, Kota Kinabalu, Sabah - 1994.

Ipco Constructors Sdn Bhd, Lumut, Perak, Malaysia.
Site survey, engineering design, supply of material, installation and commissioning of impressed current cathodic protection systems for sheet piles at Lumut Maritime Terminal, Lumut, Perak - 1995.

Gas Malaysia Berhad, Kuala Lumpur.
Site survey, engineering design, supply of material and commissioning of sacrificial anode cathodic protection system for lateral gas pipeline in Pasir Gudang, Johor - 1995.

Jabatan Kerja Raya Brunei Darussalam.
Installation supervision and commissioning of sacrificial anode cathodic protection system for water pipeline at Muara Coastal area, Brunei - 1995.

China Light & Power Company, New Territories, Hong Kong.
Design review, supply of material, commissioning of an impressed current cathodic protection system for Castle Peak and Black Point Power Station gas pipeline complete with close interval survey and DCVG survey, New Territories, Hong Kong - 1995.

Esso Production Malaysia Inc. Kuala Lumpur.
Rectification of EPMI Onshore Slugcatcher cathodic protection system inclusive of field testing, detailed engineering design, supply of material and commissioning of an impressed current cathodic protection for all buried pipelines in the slugcatcher and the incoming offshore gas pipelines at Kerteh, Terengganu - 1995.

Perusahaan Listrik Negara, Suralaya, Indonesia.
Construction erection and commissioning of impressed current cathodic protection systems for Suralaya Power Station Unit 5,6 & 7 seawater intake structures at Suralaya, Indonesia - 1995.

Malaysia LNG Sdn Bhd -Bintulu, East Malaysia.
Being the Project Manager for the installation and commissioning of impressed current cathodic protection system involving the installation of 23 deep well anode groundbeds for MLNG II and Slugcatcher area - 1997.

Total Indonesie – Balik Papan, Indonesia.
Being the Engineering Manager for the design, supply, installation and commissioning of the temporary and permanent impressed current cathodic protection system for ESPC-4 Peciko 42” X 84 KM gas pipeline - 1998.

Petroleum Development of Oman, Oman.
Being the project manager for the close interval potential survey (CIPS) and direct current voltage gradient survey of PDO various pipelines– 2001.

Trans Thai – Malaysia, Hadyai Thailand
Being the project manager for the CP audit of TransThai-Malaysia gas pipelines in Hadyai, Thailand. The work involves complete cathadic protection audit and CIP and DCVG survey – 2006

Trans Thai-Malaysia, Malaysia
Being the project manager for the CP audit of TransThai-Malaysia gas pipelines from Changlon to Seberang Prai, Penang. The work involves complete cathadic protection audit and CIP and DCVG survey – 2007
::Jan 23, 2008::Apr 25, 2008::2454582::pipecare::1::0::0 2042::Charles F. LaCrosse::13026 23 ave s ::seatac ::wa::98168::206 832 6792::lakadacat@hotmail.com::Inspection&&Field Work::http://::feild tech/inspection ::20 + yrs marine industrial:: have 20 + years experience working marine industrial coatings, 10 years q.a. and inspections familiar with all aspects of coating applications, job management, scheduling, setup, and execution of work.

have NACE CIP-1 NavSea NBPI, and C-7 blast certifications and have worked on a variety of structures and vessels including but not limited to:U.S. Navy, U.S. Coast Guard, Army corps of engineers, U.S.ARMY, Washington state D.O.T., B.P.A. Sound Transit, and many more.
Interested in field work, willing to travel, dependable and thorough.Willing to work confined space or high steel with safety first and foremost::Jan 22, 2008::Apr 24, 2008::2454581::hazel::1::0::0 2041::ILMUL HUDA KHAN::R-581,15-A5,BUFFER ZONE, ::KARACHI, PAKISTAN::PK::74700::00966530678727::ilmulhuda@yahoo.com::Field Work::http://::Position Desired: ::C. P. TECHNICIAN::Electrical Diploma, 14 yrs.Cathodic Protecion
Well casing designs. Pre-design Surveys, Monitoring, Can use, Nillson soil resistivity meter, Transformer rectifier maintenance,
Geonics, Pipe line Locator, DCVG Instrument, CP System installation, monitoring, trouble shooting.
Computer Skills:
MS Windows XP, MS Office XP etc.::Jan 16, 2008::Apr 18, 2008::2454575::155582::0::0::0 2040::Mark C. Gallagher::1600 E. 55th Street::Sioux Falls::SD::57103::605-759-7136::mgalla1040@yahoo.com::Sales&&Management&&Manufacturing&&Inspection&&Field Work::http://::Position Desired: ::Sr. Coatings Inspector::Mark C. Gallagher
Cell: (605) 759-7136
Email: mgalla1040@yahoo.com

QUALIFICATIONS:

 24 Years dedicated service Technical Sales/Inspection/Failure Analysis, etc.to Industrial/Commercial Coatings Industry.
 NACE Coatings Inspector/Level II-Certified (#6293).
 Key Projects:
1. USS John C. Stennis (US Navy Aircraft Carrier #74)….Chief Coatings Inspector in charge of overseeing removal of old non-skid coating and application of new non-skid coating on entire critical coating surface area of the Flight Deck.
2. I-20 interstate Superstructure Bridge lead removal/re-paint ($11.5mil project) in Vicksburg, Mississippi. (Over Mississippi River).
 Ability to effectively communicate and relate to all levels within an organization.
 Solid reputation for no-nonsense ethical approach.
 Work diligently with all parties to ensure specification is followed to the letter.
 Excellent work ethic…. Take great pride in my assignments.
 Physical ability to work in any conditions.
 Extremely safety conscious.
 Well educated on many different coating technologies (Industrial, Automotive, OEM)
 Very effective at Sales Mentoring/Product Training, etc.

Professional Work Experience:

1. Confidential Feb. 1,2007 to present
(Industrial Manager)
Responsibilities:
 Develop Industrial Coatings business for PPG Industrial Coatings Distributor.
 Train all personnel/customers on industrial products/capabilities, application procedures, etc.
 Work closely with Company stores/outside sales to look for new opportunities.
 Gain specification approval with key Engineers, Municipalities, etc.
 Main Technical Advisor for all Industrial products.

2. PPG Industries, Inc. March 2001 to Jan. 2007
(Sr. Area Mgr./Industrial Coatings Div.)
Responsibilities:
 Manage PPG/ HPC Industrial Coatings business in a four-state area (Nebraska, Iowa, South and North Dakota). Work very closely with direct customers, distributors, indirect and direct sales reps., and company-owned stores prospecting and closing new business.
 External customers include; Industrial Painting Contractors, Industrial plants, Consulting Engineers, City/State/Federal municipalities, Steel Fabricators, OEM facilities, etc.
 Recommend and demonstrate new products and performance based coating systems per customers requirements and/or specifications.
 Perform inspections of coatings for all above and document findings.
 Work as a “partner” with customers to go beyond the sales process.
 Assist customers with application/mixing/matching, etc. (if needed or requested) to further prove I value their business.
 Constantly keep customers informed of new technologies by classroom and/or hands-on training.

Accomplishments:
 “Excellence Award” achieved for largest increase in Sales vs. Plan / 2002.
 Increased Distributor/Dealer Sales an average of 150% annually.
 Overall sales increase of $1.5mil (over 5 years).
 Completed NACE CIP (Sessions 1,2,and 3 ).
 Completed Advanced Installation Training for Industrial Floor Coatings.
 Completed PPG Powder Coating Application and Troubleshooting Seminar.

3. ICI/Devoe Coatings Company April 1995 to February 2001 (Industrial Coatings Specialist)
Responsibilities:
Same as above except: I was instrumental in gaining specification approval for CP coatings used on buried pipeline for ElPaso Natural Gas Company in New Mexico, Arizona.

Managed following territories:

 New Mexico / Southern Colorado………1995 to 1997
 Midwest US (SD, ND, NE, IA.)………… 1998 to 2001

Accomplishments:

 Achieved average annual sales increase of 15%
 Gained several specification approvals from key Engineers, State DOT bridge depts.
 Passed NACE CIP Level 1

4. The Sherwin-Williams Company May 1986 to Sept. 1995 (Industrial Maintenance Coatings Specialist)
Responsibilities:
 Managed $1.3mil Architectural/Industrial Coatings territory in NW New Mexico/Arizona.
 Same responsibilities as above.


Accomplishments:

 Average gross margin profit of 45% on all manufactured products sold.
 GSA / Government accounts increased sales of 1500% (over 9 years).
 Territory sales increase of 275% (over 9 years).
 Received highest sales award possible “PRESIDENTS CLUB AWARD” three times!
 Received “ SALES REPRESENTATIVE OF THE YEAR”
 “ No. #1 Sales Rep. (out of 450 reps.) in Southwest Division “.

Education:

 Kearney State College (Kearney, Nebr.) 1976-1979

Major: Business Administration
Minor: Industrial Psychology

REFERENCES:

Excellent professional references available upon request.
::Jan 15, 2008::Apr 17, 2008::2454574::1957::1::0::0 2039::Gord MacFarlane::145 Toivo ST,::Thunder Bay::ON::P7B 6K9::807-983-3895::gmac_construction@yahoo.ca::Field Work::http://::Position Desired: Corrosion Technologist ::J. Gordon MacFarlane, Corrosion Technologist::145 Toivo St.
Thunder Bay ON
P7B 6K9 Phone 807-983-3895
E-mail gmac_construction@yahoo.ca

J. Gordon MacFarlane
NACE CERTIFIED CORROSION TECHNOLOGIST # 5717
Objective:
To work for a reputable organization, where my hard work, attention to detail and adaptability skills can be utilized.

Experience:
Sept. 2007 to present
Field Technologist – Fiber Optics, and Pinpoint Inspection Systems
Fiber Optic Systems Technology, Inc. (FOX-TEK)
2006 to February, 2007
Senior Corrosion Technologist
CC Technologies Canada Inc. Calgary, Alberta
● Field supervisor for close interval survey on Terasen gas transmission
system, throughout Southeastern British Columbia.
● Responsible for daily crew assignments, troubleshooting of cathodic
protection system, data management and review, daily
reporting to client and head office as well as final reporting of all field
assessments.
● Installation of Cathodic protections systems for various oil and gas
companies as well as survey and maintenance of existing systems.
2002-2006
Corrosion Technologist - Contract
MacFarlane Construction North Western Ontario
• Diagnostic testing of TransCanada Pipeline – North Western Ontario
• Close Interval Surveying of TransCanada Pipeline – North Western Ontario
• Rectifier repair and maintenance TransCanada Pipeline – North Western Ontario
• Installation Cathodic Protection Systems – North Eastern , Ontario

2001- 2002
Corrosion Technologist/ Field Supervisor
Corrosion Service Company Limited Toronto, Ontario.
• Diagnostic testing of TransCanada Pipeline – Southern Ontario
• Close Interval Surveying – Southern Ontario, Atlantic Canada
• Installation Cathodic Protection Systems – Quebec, Ontario
• Supervisor of four 3-person crews consisting of Engineers, Technicians and Labourers
• Responsible for daily and weekly progress report to client
• Utilized GPS survey equipment
• Various pipeline safety courses taken, as well as All Terrain Vehicle Operation Safety Course






2000
Crew Chief Close Interval Survey
• Supervised four 4-person crews and data entry personal for TransCanada Pipeline - Alberta Canada, April to November 2000
• Surveyed 1200 kms of pipeline throughout Alberta including initial Close Interval and Depolarization Survey as required
• Utilized specialized GPS survey equipment, Fluke Scope for measuring rectifier synchronization, IBM ThinkPad, Microsoft Excel, Outlook Express
• Job responsibilities included crew allocation, daily crew reports, data review, equipment ascertainment and repair, troubleshooting, priority setting, reporting to Head Office Calgary.
• H2S Alive Certification Course, Alberta Labour Board Safety and Leadership Course
1999
Corrosion Technologist/Field Supervisor
• Extensive Diagnostic Testing program on the TransCanada Pipeline Systems from Alberta to Thunder Bay region, from April to December
• Supervisor of four 3-person crews consisting of Engineers, Technicians and Labourers
• Responsible for daily and weekly progress report to client (TransCanada Transmission)
• Utilized GPS survey equipment
• Various pipeline safety courses taken, as well as All Terrain Vehicle Operation Safety Course
1989-1998
Corrosion Service Co. Ltd., Toronto, Ont., Contract position
Responsible for all Northern, Northeastern and North-Western Ontario, and parts of Manitoba and Quebec. Responsible for installation of corrosion control systems; potential surveys of tanks and pipelines having corrosion control systems; identifying/reporting cathodic protection system faults; maintenance of corrosion control systems; organizing and supervising sub-contractors; verbal and written reporting to clients and management;

1983-1989
System Technician
Corrosion Service Company Limited Toronto, Ontario.
Responsibilities as listed above, working out of the Toronto area.

1974-1982
Assistant Technician
Corrosion Service Company Limited Toronto, Ontario.
Part of the corrosion control program for the major oil companies as well as
Trans Canada Pipe Lines through out Western Canada, Ontario and
Quebec, on a contract basis while a student in high school and college.

1989-2006
PART OWNER, MacFarlane Construction South River, Ontario
Responsible for estimating and bidding contracts with various clients including
Municipal and Provincial government agencies; management of day to day
operations including quality control, budget control, accounts payable and
receivable; equipment purchasing and maintenance.


Education:
Successfully completed NACE Corrosion Technologist Examination
April 1997

National Association of Corrosion Engineers Cathodic Protection Course
1985

Electronic Engineering Techniques-communications Diploma
1982
Seneca College of Applied Arts and Technology, Toronto Ontario.

Business Administration
1983
Seneca College of Applied Arts and Technology, Toronto Ontario.

HONOURS SECONDARY SCHOOL DIPLOMA
1979
Newmarket High School, Newmarket Ontario.
Skills:
• Hands-on field experience including installation of Cathodic protection systems on underground tanks and pipes; performed potential measurements on Cathodic protection systems; performed activation as well as final survey of systems; utilized state-of-the-art equipment and computer programs
• Effective project management including submission of rough as-built drawings to the drafting department then certifying the final as-built drawings; conferring with engineering group for data analysis; interpretation and trouble-shooting; invoicing and final reporting of the completed job to clients
• Leadership and supervisory skills including work scheduling; arranging for sub-contractors; order and control of materials; reporting to clients and management
• Maintaining strong relations with fellow workers
• Effective independent performance and extensive travel through out Canada
• Various refinery and pipeline safety courses
• Extensive experience with GPS system and other state-of-the-art corrosion diagnostic equipment and computer software
• WHMIS training
• Successfully competed in many different highly competitive sports in high school and college especially hockey and football
• Certified intermediate level hockey coach
• Excellent verbal and written skills
• Computer skills including Windows 95,98,ME and XP, Microsoft Office small business, The Internet
• Certified in CPR and St. John’s Ambulance first aid April 2006,Expires April 2009
• H2S alive certification April 2006. Expires April 2009
• Successfully completed the Alberta Electrical apprenticeship rectifier course July 2006
• Attended the NACE pipeline integrity seminar Houston Texas Feb. 2002
• Attended the NACE Northwestern convention Calgary, Alberta Feb. 2003.

Professional References:
Mr. Brian Brochu, Corrosion Service Co. Ltd., Professional Engineer, MBA.
Cell.# 514-972-6785
Mr. Reinhard Dyck, TransCanada Pipeline Ltd. Integrity Manager,
Office # 403-920-6505.
Mr. Jean Lamouruex, Corrosion Service Co. Ltd., Corrosion Specialist,
Office # 450-449-2600,Cell# 514-916-5022.
Mr. Kelly Sorensen MBA, First Financial Bankcorp, Los Angeles Ca.
Office # (310) 571-3600 ext. 209,Cell (310) 993-9507


::Jan 13, 2008::Apr 15, 2008::2454572::kimbi33::0::0::0 2038::Coleman J. Moore::100 Harvest Sugar Row::Carencor::LA::70520::337-280-4250::Cmoore7474@hotmail.com::Inspection::http://::Internations Coating Projects ::Nace Certifed Coating Inspector::Coleman J. Moore

NACE CERTIFIED COATING INSPECTOR # 2458

QUALIFICATIONS


NACE Certified Coating Inspector (Certified 1990) 11 years as a Nace Certified Coating Inspector.

Inspection background includes: Failure analysis-coating surveys on Offshore Platform and Fabrication yards, Inspections Offshore Platform -Storage Tank & Vessel Coating and Lining and FPSO Fabrication, Ships hulls & ballast tank and Insulations.

Experience: Includes 8 years as a blasting and painter on Land and offshore platform in the Gulf of Mexico, New fabrication, refinery tanks and piping etc.

Overseas Experience 2006 & 2007: Chevron USA/ Nigeria Port Hard-Court Agbami Deep Water Project FMC Sub Sea Manifold / Suctions Piles Constructions
QA supervisor working with the local coating inspectors, Insulations solving technical and QA/QC issued.

Two years in Malaysia contracted to Dow Chemical. A new Petro Chemical plant, Duties included Safety QA/QC manager/coating inspector/supervisor, working with the local coating inspectors solving technical and QA/QA issued.

1 year in Equatorial Guinea Mobil Oil the Zafino Producer Project FPSO, Duties QA/QC Coating Inspector

Inspection experience: as a Nace Coating Inspector in Inorganic/Organic Zinc Primer Systems, Epoxies / Urethane 3 & 4 Coat Systems, High Heat Coatings, Plural Component Chopper Gun Systems, Plural Component Polyester Glass Flake Pump System, Fusion Bonded Epoxy, Fiberglass Reinforced Pipe, Piping Shrink Sleeves, Plasite Tank Linings, Plural Component 100% Solids Elastomeric Tank Lining Pump Systems, Owens - Corning 0 - 600 deg. LNG Insulation, Concrete Weight Coatings. Plural Component Polyurethane Foam to Concrete Coated Offshore Pipelines, Wax Wrap to Sub-Sea Valves, Flame Spray Polyester Coating (steel cantinery risers), Thermal Spray Aluminum. Offshore Polypropylene mold injection.
Successfully inspected coatings.


Inspected: Bridges for the Depart of Transpirations here in the United States, Nuclear Submarine Ballast Tanks, Offshore platforms, Coating Survey to ensuring strict compliance to all NACE, Federal standards and regulations, including OSHA safety procedures.
• Ensure no oil, or no other contaminants are discharged in the ground or the Gulf of Mexico waters.
• Monitored operations and safety, land & offshore paint crew and bridges, and oil refinery and offshore platform.

• Have a valid USA Passport and willing to travel internationals


PERSONAL EQUIPMENT

Toshiba Model 1135 Laptop Computer / Printer
 Microsoft Office XP (Excel/Word)
 NIST Calibration Standards (0-40 mils)
 Psychrometer and Surface Thermometers (magnetic/laser) and Psychometric Tables
 Visual Standards VIS-1
 M-1 Holiday Detector
 Microtest Dry Mil Gage & Positector 6000
 Conductivity Tester
 Pit Gage
 Sony Mavica Digital Camera
 Note: Dry Mil Gages were Calibrated and Certified by Mortech Services, New Iberia, LA March 2004 - exp March 2005

RELEVANT EXPERIENCE

ISI Moody International Inc
Amelia Division / Houston TX
Chevron Agbami Deep Water Project Sub Sea Manifold Constructions Nigeria
Pride Drilling Curacao Netherlands Antilles
Ballast Coating Survey Pride International
Offshore Coating Inspector platform PB Amaco
Bobby Knight (985) 631-0537

The Aulson Company Inc
SSN 761 Springfield Nuclear Submarines
Coating Inspections Main Ballast Tanks
Tommy Gauvin (860) 376-4493
Century Tech Services 08 to Dec 24 2004
Willie Lewis (504) 234-7504
Richard Roper (504) 400-0068
Offshore Coating Inspector
Coating Surveys Offshore Platform Chevron - Texaco

Petrofac/Petrobras LLC Project FPSO P-50
Coating Supervisor/Solving Technical and QA/QC Issues Euro Navy coating
Hot and cold Insulations Inspections
Gary Tauzin (985) 859-5744
Pete Moore (337) 984-3838

Corrpro Companies Inc. 06/2000 to 08/2004
Tim Conlin (337) 685-3106
Offshore Coating Inspector Chevron /Texaco

Bredero Price (Shaw Piping)
Fusion Bond Epoxy (FBE) Project Coating Manager/Supervisor Solving Technical and QA/QC Issues

S.G. PINNEY & ASSOCIATES, INC.
P.O. Box 9220
Port St.Lucie, FL 34985-9220

Work History
MARINE COATING INSPECTOR contracted to:
U.S. Department of Transportation Maritime Administration for the following Vessels:
SS Mission Buena Ventura - Dry Dock - Hull Coating - Avondale Shipyard - New Orleans, LA
SS Mt. Washington - Cargo Tank Coating - Century Marine - Orange, TX
SS Mt. Vernon - Dry Dock - Hull Coating - G.M.D. Shipyard - Brooklyn, NY
SS Mt. Vernon - Cargo Tank Coating - Houston Ship Repair - Orange, TX
SS Mission Capistrano - Dry Dock Hull Coating - Bender Shipyard - Mobile AL
SS Pioneer Contractor - Top Side/Superstructure Coating - Gulf Copper Ship Repair - Pt. Arthur, TX
1998 Oceneering International Inc.
South Africa Equatorial Guinea
Mobil Oil Zafino Producer Project
Project Manager & Coating Inspector: Blasting & coating of cargo & ballast tank coating
1998 South Dakota: D.O.T.-
Coating Inspector: Blasting & Coating
Bridge South Dakota DOT
Bridge Krotz Spring Louisiana LADOT
1998-99- Shell Oil Products Company
Ft. Lauderdale Fla. Oil /Gas Storage Tank Internal Lining
14,968 barrels, Internal Epoxy coating 100% solids
INDUSTRIAL COATING INSPECTOR
Praxair - East Chicago, IN - Tank Coating - New Construction
L.T.V. Steel Coke Plant - Chicago, IL - Absorbent & Regenerative Vessels- internal Fiberglass Lining
Praxair - Gary, IN - Tank Coating - New Construction
City of South Bend, IN - Water Dept. - Tank Coating – Internal & Exterior
Mobil Oil Refinery - Beaumont, TX - Tank Coating – Internal & Exterior
Clark Oil Refinery - Blue Island, IL - Tank Coating –Internal & Exterior
General Electric - Norcross, GA – Co-generation Units - External Coating
DOW Chemical – Optimal Project – Infra-structure (OPI) Malaysia 15 Internal External Tank Coating & Three Water Treatment Tanks –Concrete
Bridge Coating Inspector
State of South Dakota DOT
City Of New York DOT
State of Louisiana DOT
REX PAINTING, INC. 1978 to 1990
Gretna, LA
I started as a blaster/painter after (five or six) I was promoter to a blast & paint foreman, my paint crew sixe was eight men in the Gulf of Mexico
EDUCATION:
Michigan City High School, Indiana - Diploma
Attended Davenport College of Business - Grand Rapids, Michigan
Over 20 years Experience in the Marine and Industrial Coating Inspected
Vinyl coating
Fusion Bond Coating (FBE) QA/QC Coating Supervisor
Concrete Coating
Thermal Spray Coating (TSA)
Internal Lining Coating
Antifouling Marine Coating
Epoxy Plasit, EuroNavy
Alkyd Coating
Chemical Pickling
Chrome Coating

Thank you:
Coleman J. Moore
Phone: (337) 981-1876
Cell: (337) 280-4250
E-Mail Cmoore7474@cox.net Cmoore7474@hotmail.com
::Jan 11, 2008::Apr 13, 2008::2454570::terry123::1::0::0 2037::Jiabin Han::342 W State St::Athens::OH::45701::7405939947::jh113603@ohio.edu::Intern&&Engineering&&Research::http://::Position Desired: ::Corrosion engineer::JIABIN HAN
PhD Candidate, M. ChE, B. ChE
E-mail: jh113603@ohio.edu

INTERESTS: Corrosion engineering

OBJECTIVES: Corrosion engineer

EDUCATION:

PhD candidate, Ohio University

Major: Chemical Engineering
Expected graduation: Jan. 2008
GPA: 3.7/4.0
Dissertation: Study on Galvanic Mechanism of Localized CO2 (under Dr. Srdjan Nesic).


M.ChE., Tianjin University (China, P. R.), 2003


Major: Chemical Engineering
Thesis: Study on the Crystallization of Caffeine

B. ChE., Tianjin University (China, P. R.), 2000

Major: Chemical Engineering
Thesis: The Reactive Crystallization Processes of 6-Aminopenicillanic Acid


PROFESSIONAL RECOGNITION:

Student member of NACE (2004 - present)

2nd place at 2006 Student Research and Creative Activity Fair, Ohio University (2006)

EXPERIENCE:


INSTITUTE FOR CORROSION AND MULTIPHASE TECHNOLOGY (ICMT),
OHIO UNIVERSITY. 2004-present

Graduate Assistant

Experimental investigation of localized CO2 corrosion mechanisms:
Developed an artificial pit technique in order to directly measure the electrochemical signal due to localized corrosion propagation.
A 1-D galvanic mechanism of localized corrosion was elucidated (NACE/2007 paper No. 07323).
A 2-D mechanistic scenario of the localized corrosion propagation was proposed based on my further studies of passivation (NACE/2008 paper No. 08332).
A theory on localized corrosion, especially its propagation, was developed and verified by my experimentation and via related research within the ICMT.
Spontaneous passivation on mild steel in CO2 environments.

Modeling:
Developed an electrochemical mechanistic localized CO2 corrosion model (ICC 2008).
Validated localized CO2 corrosion model by polarization and localized corrosion tests (ICC 2008).

BP AMERICA, INC., HOUSTON, TX
Internship at integrity management team, exploration and production technology group
CO2 corrosion degradation map development
Extended corrosion mode limitations to high temperature (HT), high pressure (HP) and high salinity (HS) environments.
Improved oxygen corrosion model to extended HT, HP and HS conditions.

Galvanic corrosion model development:
Developed carbon steel and inconel galvanic corrosion model.
Developed galvanic corrosion distribution model for bimetallic tubular geometry.

Experimental project
Designed test matrix to validate the developed CO2 corrosion model.

Other activities
Poster presentation at BP Techno Fest 2007.
Drilling training by Cameron Inc.
Exposure to facility design for Atlantis project.
Exposure to inhibitor research review from service companies.
ADDITIONAL:

Vice president of NACE Ohio University chapter (2006 ¨C 2007)
Treasurer of NACE Ohio University chapter (2005 ¨C 2006)
Manager of Small Scale Lab at ICMT (2004 ¨C 2005)


OTHER SKILLS:


Computer:
Windows, Microsoft Office, MATLab, C++, HTML.

Language:
Chinese (native), English (fluent)


REFERENCES:

Srdjan Nesic
Professor of chemical engineering, Director of ICMT,
Tel: + 1 (740) 593 9945,
E-mail: nesic@ohio.edu

Tingyue Gu
Associated professor of chemical engineering,
Tel: + 1 (740) 593 1499,
E-mail: gu@ohio.edu

CONTACT ME


:

342 West State Street
Institute for Corrosion and Multiphase Technology
Athens, OH 45701
(740) 593 9957 (office)
(740) 274 0609 (cell)
E-mail: jh113603@ohio.edu

PUBLICATIONS AND PRESENTATIONS

Refereed Publications

An Electrochemical Mechanistic Localized CO2 Corrosion Model,
Jiabin Han, and Srdjan Nesic
ICC/2008,(submitted).

Characterization of the Passive Films on Mild Steel in CO2 Environments,
Jiabin Han, David Young, Srdjan Nesic, David C. Ingram, and Akhilesh Tripathi,
ICC/2008,(submitted).

Roles of Passivation and Galvanic Effects in Localized CO2 Corrosion of Mild Steel,
Jiabin Han, Yang Yang, Bruce N. Brown and Srdjan Nesic,
NACE/2008,paper No 08332.

Electrochemical Investigation of Localized CO2 Corrosion on Mild Steel,
Jiabin Han, Yang Yang, Bruce N. Brown and Srdjan Nesic,
NACE/2007,paper No 07323.

Determination and correlation of solubilities of avermectins in different solvents,
Zhi Xie, Zhidong Chang, Jiabin Han, Xin Hu, Mingmei Wang and Wenjun Li,
Chinese Journal of Antibiotics, No. 10,2006,pp. 42-45.

The Effect of Impurity on the Crystal Habit of 6-Aminopenicillanic Acid during its Growth,
Jiabin Han, Jingkang Wang,
Journal of Hebei University of Science and Technology (Chinese), 2004.

The Measurement and Correlation of the Solubility of Caffeine in Water and Ethanol,
Jiabin Han, Jingkang Wang,
Journal of Chemical Industry and Engineering (Chinese), 2004.

The Model of the Solubility of Caffeine Based on the Artificial Neural Networks,
Jiabin Han, Jingkang Wang,
Chemical Industry Times (Chinese), 2004.

The Metastable Region of Caffeine in Water and Ethanol,
Jiabin Han, Jingkang Wang,
Journal of Tianjin University Science and Technology (Chinese), 2003.

Supercritical Carbon Dioxide Extraction of Caffeine,
Jiabin Han, Jingkang Wang,
Modern Chemical Industry; (Chinese), 2003,Vol 23(3).

The Measurement of Solubility of Phenoxyacetic Acid and the Study on Extraction Kinetics of 6-Aminopenicillanic Acid in Phenoxyacetic,
Jiabin Han, Jingkang Wang,
Hebei Chemical Engineering and Industry (Chinese), 2002,Vol 6.


Conference Presentations

An Electrochemical Mechanistic Localized CO2 Corrosion Model,
Jiabin Han, and Srdjan Nesic
ICC/2008,Las Vegas, NV (2008).

Characterization of the Passive Films on Mild Steel in CO2 Environments,
Jiabin Han, David Young, Srdjan Nesic, David C. Ingram, and Akhilesh Tripathi,
ICC/2008,Las Vegas, NV (2008).

A 2-D Galvanic Mechanism of ¡°Mesa¡± Localized CO2 Corrosion: A Study on the Passivation of Mild Steel,
Jiabin Han, Yang Yang, Bruce N. Brown and Srdjan Nesic,
NACE/2008,New Orleans, LA (2008).

Electrochemical Investigation of Localized CO2 Corrosion on Mild Steel.
Jiabin Han, Yang Yang, Bruce N. Brown and Srdjan Nesic,
NACE/2007,Nashville, TN (2007).


Poster Presentations

Studies on the Galvanic Mechanism of Localized CO2 Corrosion on Mild Steel
Jiabin Han
NACE/2008,New Orleans, LA (2008).

Investigation of Localized CO2 Corrosion on Mild Steel,
Jiabin Han,
NACE/2007,Nashville, TN (2007).

Galvanic Effect on Localized CO2 Corrosion by Artificial Pit Test,
Jiabin Han,
NACE/2006,San Diego, CA (2006).

Electrochemical Investigation of Localized CO2 Corrosion on Mild Steel,
Jiabin Han, Yang Yang, Bruce N. Brown and Srdjan Nesic,
ECS, Cancun, Mexico (2006).::Jan 10, 2008::Apr 12, 2008::2454569::123456::0::0::0 2036::Ryan Farmer::6014 DarbyWay ::Spring::TX::77389::469-878-6122::ryanfarmer2006@yahoo.com::Inspection::http://::Corrosion Tech ::Looking to take the next step in Corrosion::6014 Darbyway Spring, TX 77389 Phone 469-878-6122 ryanfarmer2006@yahoo.com
Ryan K. Farmer

Objective: Seeking a field services position utilizing my education, skills, and experience.
Operations are also an interest that I am pursuing.

Education: Sam Houston State University, Huntsville, TX
Bachelor of Business Administration, GBA: May 2002

Work experience: North American Survey Corporation/Hanson Survey and Design Houston TX, 2003-2008
Operations Manager/Forman in Field Services

Cathotic Protection Testing and Evaluation, CIS, DCVG, Sub-Meter GPS and Depth to Cover on Pipelines, Maintained an Achieved 16 OQ certifications, Rectifier maintenance, Tested over 12,000 miles for over 30 pipeline companies.

Texas Best Builders Houston/Dallas TX, 2001-2003

Regional Sales Representative/Operations Manager
Scheduled, supervised, and managed all facets of residential construction company consisting of 15 skilled labors and 3 sales associates.

Maintained quality assurance and customer satisfaction, developed and maintained multi-location infrastructure with vendors, suppliers and customers.

Browning Ferris Ind. (BFI) Procurement Through Processing Houston, TX 1993-2000 Material Master Team/ Vendor Master Team

Headed new software and operation systems implementation for a fortune 500 company.

National controller of SAP software in the development infrastructure.

Profile: An accomplished individual offering a strong educational and job experience background, with over 12 years of successful sales, marketing, and management training. Excellent analytical and communication skills with a career and education that reflects hard work, reliability, competence and confidence underscored by commitment, performance, and drive.

References: Complete references available upon request.
::Jan 4, 2008::Apr 6, 2008::2454563::ryanfarmer::1::0::0 2035::ANTHONY MASON::CAMADINE, CHURCHHILL, WHITEHAVEN.::CUMBRIA.::UK::CA288NE::01946729585::anthonymason61@hotmail.com::Management&&Inspection::http://::Position Desired: ::AH MASON INSPECTOR/MANAGER::BGAS/CSWIP PAINTING INSPECTOR GRADE 1.
ICORR PAINTING INSPECTOR LVL 2.
ICORR FIREPROOFING INSPECTOR LVL 2.
HNC QUALITY MANAGEMENT
HNC CONSTRUCTION MANAGEMENT
NVQ LVL 4 SITE INSPECTION ::Jan 1, 2008::Apr 3, 2008::2454560::HIGHPANTS::1::0::0 2034::Keith Clement::436 Valley View Dr.::Ruston::La::71270::318-243-3678::keicle@yahoo.com::Sales&&Management&&Certified or Licensed&&Inspection::http://::CP-Internal-Coatings ::Corrosion::I am presently working as an Inspector with Englobal Engineering on the construction of the Gulf South 42” expansion project from Texas to Alabama. This construction phase of the project should be completing in December of 07. As this is a great opportunity for me, I would rather be inspecting or consulting in the corrosion and operations side of the gas Transmission industry in the southern region in the future years.
Prior to moving to Ruston, La., I had nineteen years of service with Transcontinental Gas Pipeline, formerly Williams Field Services, and Texas Gas Transmission Corporation. I have also successfully completed NACE Basic Corrosion, Protective Coatings and Linings, Cathodic Protection level 1,and Internal Corrosion for Pipelines courses and have been certified by the NACE Application Review Board as a Corrosion Technologist.

I would appreciate the opportunity to discuss the goals of your company, and how I might be of assistance in the accomplishment of such goals.

Thanks for your time
Respectfully yours,

PROFESSIONAL EXPERIENCE

December, 2006 – Present


Halgo / Englobal Engenering

Shreveport, La. / Tulsa, Ok.


ENGLOBAL
COATINNGS AND CATHODIC PROTECTION INSPECTOR FOR GULF SOUTH 42” TEXAS TO ALABAMA EXPANSION PROJECT.
HALGO
MANUFACTURES REPRESENTATIVE / PROJECT MANAGER / FOR CENTERPOINT 42” EXPANSION PROJECT.
PRODUCT REPRESENTATIVE FOR PERRY EQUIPMENT CORPORATION (PECO) FAMILIAR WITH PROOCESS FLUID AND GAS FILTERS, COALESCING FILTER VESSELS, PHASE SEPERATORS, AND MIST MEMOVAL SEPERATORS.
PRODUCT REPRESENTATIVE FOR ANDERSON GREENWOOD, ANDERSON GREENWOOD PRODUCT LINE OF ASME SECTION I, III, IV, VIII RELIEF VALVE DESIGNS, AND INSTRUMENT VALVES. SPRING AND PILOT OPERATED SAFETY RELIEF VALVES, BOTH POP AND MODULATING USING METAL AND SOFT SEATED DESIGNS.
PRODUCT REPRESENTATIVE FOR NORRISEAL. LEVEL CONTROL FLOAT DISPLACEMENT, BOTH CHAMBER AND INSERT FOR LIQUID DUMP VALVES OR ALARM SWITCHES. PRESSURE CONTROL FOR CAGE AND PLUG STYLE CONTROL VALVES. PISTON STYLE CHECK VALVES AND PNEUMATIC PRESSURE CONTROL VALVES.
MANAGED TURNKEY PROJECT MANAGEMENT WITH ASME CODE STAMPS “U”, “UV”, “S”, “VR”, “R”, HEAT EXCHANGER REPAIR AND CLEANING AIR AND LIQUID, RELIEF AND CONTROL VALVE TESTING AND REPAIR, LEVEL CONTROL INSTULATION REPAIR, AND CALIBRATION. VALVE AUTOMATION INSTULATION AND REPAIR.


January 06 – December 2006

Champion Technologies
Simsboro, La.

SALES REPRESENTATIVE
IMPLEMENTED, MONITORED, AND MAINTAIN A PIPELINE INTERNAL CORROSION CONTROL PROGRAM AS PART OF OVERALL INTEGRITY MANAGEMENT PROGRAM. RETAIN AND STREGTHEN COUSTOMER RELATIONSHIPS TO INCREASE COUSTOMER SATISFACTION LEVEL. ACHIEVE SALES TARGET THROUGH CORDINATION WITH MANAGEMENT IN DEVELOPMENT OF SELLING STRAGITY AND TACTICS. ASSIST IN SOLVING FIELD PROBLEMS ON LOCATION WITH COUSTOMER REPRESENTATIVES. ASSISTED IN COORDINATION OF DELIVERY, TREATING, AND SERVICE WORK FOR COUSTOMERS. ASSIST IN WRITING TECHNICALLY SOUND RECOMMENDATIONS. PROMOTE COUTINUOUS IMPROVEMENT IN QUALITY, HEALTH SAFETY AND ENVIROMENTAL INITIATIVES.


April, 1996 – March 31,2005

Transcontinental Gas Pipeline
Schriever, La.

GAS MEASUREMENT TECHNICIAN (OFFSHORE OPERATIONS)
MONTHLY MEASUREMENT DUTIES, SCHEDULE PIG RUNS, CATHODIC PROTECTION READINGS, BI-MONTHLY RECTIFIER READINGS, HYDROSTATIC TESTING, INTERNAL AND EXTERNAL CORROSION ASSESSMENT, MAINTAIN CHEMICAL INJECTION FOR INTERNAL CORROSION, INSPECT ANODE INSTALLATIONS, UT AND DP TESTING, INSPECT AND MAINTAIN SAFETY SYSTEMS, INSPECT BLASTING AND PAINTING OPERATIONS, ASSIST ANNUAL ATMOSPHERIC MONITOR REPORTING, MAINTAIN AND ACCOUNT FOR DOT REQUIREMENTS, PLAN MONTHLY WORK SCHEDULES AROUND HELICOPTER AND TRAINING SCHEDULES.


April, 1987 to April, 1996
Texas Gas Transmission Corporation
Amelia, La.
MAINTENANCE MAN SR. AND OPERATOR 1
MAINTAINED LAND BASED GAS PIPELINE OPERATIONS, INSPECTED NEW CONSTRUCTION AND UPGRADE OPERATIONS, FAMILIAR WITH GAS COMPRESSION.

EDUCATION
May 1976
Thibodaux High School
Thibodaux La.

Young Memorial Voc-Tech December 1978
Morgan City, La.
DRAFTING

SKILLS & QUALIFICATIONS

ATTENDED PRODUCT LINE SALES AND TECHNICAL TRAINING FOR PECO, ANDERSON GREENWOOD, AND NORRISEAL.

NACE CERTIFIED AS A CORROSION TECHNOLOGIST, WITH THE SUCCESFUL COMPLETION OF BASIC CORROSION, CATHODIC PROTECTION LEVEL-1,PROTECTIVE COATINGS AND LININGS AND INTERNAL PIPELINE CORROSION. (CERTIFICATES AVAILABLE)

OPERATOR QUALIFIED IN ALL AREAS NECESSARY TO PERFORM MEASUREMENT AND CORROSION DUTIES AS REQUIRED BY COMPANY AND D.O.T.D. PROCEDURES.

TRAINED AND DRILLED IN EMERGENCY SPILL RESPONSE

ACTIVE PARTICIPANT AS SAFETY OFFICER FOR TWO EMERGENCY SPILLS ENCOUNTERED IN THE SCHRIEVER DISTRICT.

GOOD COMPUTER SKILLS, CAPABLE OF BECOMING COMPETENT ON ANY SOFTWARE PACKAGE AVAILABLE

FAMILIAR WITH MOST D.O.T.D. FORMS AND PROCEDURES REQUIRED IN THE GAS TRANSMISSION INDUSTRY.

ABLE TO WORK INDEPENDENTLY OR AS A COOPERATIVE TEAM MEMBER.

CAPABLE OF DEALING WITH COUSTOMERS IN A PROFESSIONAL MANNER.


::Dec 30, 2007::Apr 1, 2008::2454558::keith58::1::0::0 2033::Magsud Aliyev::8 mcr, H.Huseynov street 13/45::Baku, Azerbaijan::AZ::1130::(+99450)2252579::amagsud@yahoo.com::Management&&Intern&&Engineering&&Research&&Inspection::http://::Position Desired:Corrosion Engineer ::Magsud Aliyev::PERSONAL INFORMATION
Birth date and place: 14 August 1970,Baku, Azerbaijan Nationality: Azeri Sex: MaleMarital status: Married. I have a child.
EDUCATION
1987–1992 “Metallurgy” faculty of Azerbaijan Technical University (AzTU). Specialty: “Technology and equipment of welding production”- Mechanical Engineer; 1993-1996 Philosophy Doctor (PhD) in Material-science and Corrosion. Azerbaijan Technical University.- QUALIFICATION
- “Quality Control Laboratory Tests”(Internal and External Pipe Coating System); EUPEC Pipe Coatings GmbH, Mulheim, Germany, 12.01.04 - 28.01.04 (3 weeks)- Pipeline Coatings Inspector; ICORR (Level 2), Institute of Corrosion, ICORR Test Centre, Rotherham, United Kingdom, 2005.- Induction to ISO 9001:2000. Quality Veritas, Baku, Azerbaijan, 2007
WORK EXPERIENCE
01.09.07-present: CASPIAN PIPE COATINGS LTD (FORMERLY EUPEC PIPE COATINGS). BP PRODUCED WATERLINE PROJECT. BAKU, AZERBAIJAN. (PROJECT COMPLETED).POSITION: QUALITY CONTROL MANAGER -Manage and Coordinate of 3LPE and 3LPP external coating test process in according with DIN 30670 DIN 30678 and NF A 49-711. -
05.10.06-30.09.07: EUPEC PIPE COATINGS AZERBAIJAN LTD. BP AND SOCAR PIPE LINE PROJECT. BAKU, AZERBAIJAN.POSITION: CORROSION COATINGS LABORATORY MANAGER AND QC COORDINATOR (CC AND CWC-CONCRETE WEIGTH COATING)- Co-ordination of the activities of Inspectors for Corrosion and Concrete Weight and Anode Installation.- Preparation of Non-conformities and implementation of Corrective Actions.- Co-produce quality documentation procedures;
15.01.06-04.10.06: PARSONS ENGINEERS. KUWAIT OIL COMPANY - CHEVRONTEXACO. SEK (SOUTH-EAST KUWAIT) GREATER BURGAN OIL AND GAS FIELD SPECIAL PROJECT. INTEGRATED FACILITIES TEAM, AHMADI, KUWAIT.POSITION: PRINCIPLE DISCIPLINE ENGINEER (METALLURGY AND CORROSION).- Review and selection of materials of the construction for equipments and piping in H2S/CO2 environments, corrosion methods and other materials data.-Review cathodic protection plan by galvanic anodes for pipelines and equipments.- Review any special metallurgical requirements.- Review and selection painting, coating systems; - Selection and review chemical inhibitors system; - Selection and review of intelligent pigging for pipeline; - Review special welding procedures (ASTM, ASME, API, AWI, NACE, BS, etc).- Review of corrosion monitoring and prevention methods, protection equipment (pipeline, vessels, separators, piping system, compressors, instrumentation, rotating equipment, tanks, etc).- Assessment of Corrosion Risk using Risk Based Inspection software (pipeline, vessels, storage tanks, etc); - Calculation of Corrosion rates using NORSOK CO2 Corrosion Rate Model; - Review equipment Vendor Data.- Perform Safety and Operability Reviews.- Inspection and survey all exiting equipments and pipelines in South East Kuwait.- Update existing Aging Equipment Report and come up with recommendation to fix potential problems.- Helping in preparing cost estimates and budget proposals.06.06.05 – 15.01.06: TECHNIP MARITIME OVERSEAS LTD - PCH OFFSHORE PTY AUSTRALIA - “SHAH DENIZ” (KING OF SEA) GAS EXPORT PROJECT (FABRICATION AND INSTALLATION OF TPG-500 GAS PLATFORM). BAKU, AZERBAIJAN. (PROJECT COMPLETED).POSITION: ASSISTANT CONSTRUCTION MANAGER (PAINTING, COATING, INSULATION, FIREPROOFING); -Coordinate of insulation, painting, coating and fireproofing jobs of all equipment; - Overseeing Construction work within the Architectural, Painting, PFP and Insulation disciplines.- Visual assessment and test for the assessment of surface cleanliness.- Determining and inspection of surface roughness characteristics of blast cleaned substrates.-Applying surface preparation methods.-Corrosion protection of steel structures by protection paint systems.
01.02.04 - 05.06.05 EUPEC PIPE COATINGS AZERBAIJAN LTD ACG PIPE LINE PROJECT. PHASE 1 AND 2. “SHAH DENIZ” GAS EXPORT PROJECT. BP EXPLORATION. AZT SANGACHAL INTERCONNECTING PIPELINE. BAKU, AZERBAIJAN. (PROJECT COMPLETED).POSITION: CORROSION COATING INSPECTOR, SUPERVISOR AND QA/QC COORDINATOR -Coordinate of 3LPE and 3LPP external coating test process in according with DIN 30670 DIN 30678 and NF A 49-711. -Visual assessment and test for the assessment of surface cleanliness.- Determining and inspection of surface roughness characteristics of blast cleaned substrates.-Applying surface preparation methods.-Corrosion protection of steel structures by protection paint systems.
25.02.03 – 01.02.04 EUPEC PIPE COATINGS AZERBAIJAN LTD. BP ACG PIPE LINE PROJECT. PHASE 1. BAKU, AZERBAIJAN.POSITION: CORROSION COATING LABORATORY SPECIALIST- Taking, preparing and making analyses of all lab tests (Analyze of blasting materials (Sieve analyze), Cathodic Disbondment test, Elongation, Indentation, Differential Scanning Calorimetry, Hot water, Adhesion Peel Strength, Melt flow Index, Gel Time, Coating Resistance, Moisture Content analyze, Impact test, Shore D tests, Contamination test, Porosity test, Flexibility test, Viscosity, Cissing and Pinhole test, Bending Test, V-cut test, working with Elcometer, measuring of wet and dry film thicknesses, working with holiday detector (35 kV) etc.). Calibration of the above instruments, gauges. 01.10.2001– 31.03.2002 CHRISTIAN - ALBRECHT’S UNIVERSITY. TECHNICAL FACULTY, DEPARTMENT OF MATERIAL-SCIENCE. INTERNATIONAL GROUP OF PROF. DR. FRANZ FAUPEL. KIEL, GERMANY.POSITION: AWARDED RESEARCHER- Title of Project: “Metallization of Polymers and Thin films”01.02.1994 – 01.04.1998 MIDDLE EAST TECHNICAL UNIVERSITY. TECHNICAL FACULTY, CORROSION DEPARTMENT. TURKISH-AZERBAIJAN JOIN RESEARCH PROJECT, TUBITAK-DOPROG. PROF. DR. MUSTAFA DORUK, ANKARA, TURKEYPOSITION: SENIOR SCIENTIFIC RESEARCHER- Title of Project: “Design and Development of High-Alloy Steels for Applications in Petroleum and Petrochemical Industries against Corrosion”JANUARY 1992 – JUNE 2003 AZERBAIJAN TECHNICAL UNIVERSITY. FACULTY OF METALLURGY, DEPARTMENT OF ”TECHNOLOGY OF CONSTRUCTION MATERIALS, POWDER MATERIAL SCIENCE AND CORROSION”, “CORROSION” S&R LABORATORY, BAKU, AZERBAIJAN.POSITION: ASSISTANT, SR, SENIOR SCIENTIFIC RESEARCHER- Fulfilling of all corrosion laboratory tests and analyses for different projects
PEDAGOGICAL EXPERIENCE
SEPTEMBER 1994 – JUNE 2000 AZTU; CHAIRS OF “WELDING AND FOUNDRY PRODUCTION” AND” TECHNOLOGY OF CONSTRUCTION MATERIALS, POWDER MATERIALSCIENCE AND CORROSION”, BAKU, AZERBAIJAN. POSITION: LECTURER
CERTIFICATES AND DIPLOMA
CERTIFICATE OF ACHIEVEMENT. CENTER OF ENGLISH LANGUAGE TEACHING (CELT), BAKU, AZERBAIJAN.- SUPERVISOR SAFETY LEADERSHIP. (Risk assessment, Toolbox Talks, Task Observation). August 05,2005 (BY BP). BAKU, AZERBAIJAN.- ADVANCED SAFETY AUDIT. (BY VISION-SAFETY COMPANY). 30.07.2005. BAKU, AZERBAIJAN- SAFEDRIVE DEFENSIVE DRIVING COURSE. SAFEDRIVE INTERNATIONAL CERTIFICATE, 11.05.2006. KUWAIT
LANGUAGES
-Azeri Native- Russian Fluent- English Fluent- German Fluent -Turkish Fluent
DRIVING LICENCE
-Kuwaiti Driving License; Kuwaiti Ministry of Interior Affairs and Traffic Police; License No: 270081704607; Expiry date: 23.08.2016-Azerbaijan Driving License; Ministry of Interior Affairs; Head Traffic Policy. License No: AB No:022154. Expiry Date: 24.11.2017
COMPUTER SKILLS
-“Microsoft OFFICE-2003” Packet programs, AutoCAD – 14,“Lotus Notes”; Microsoft Outlook; TWI RBI Software; Predict RBI Software: DNV NORSOK Corrosion Rate Model
PROFESSIONAL MEMBERSHIP
- Institute of Corrosion. Membership No.: 204718. United Kingdom, Leighton Buzzard. 14.08.2004; - Council of Corrosion. January 1993 - present. Baku, Azerbaijan.- NACE (National Association of Corrosion Engineers). Membership No: 211812,Houston, USA. November 2007.
HONORS AND AWARDS
-AWARD–DAAD -Stipendium; 01.10.2001 - 31.03.2002,Kiel, Germany.-AWARD-Grant–NATO PC–B Advanced Fellowship Program, 01.10.2003 – 31.06.2004,Gazi University, Prof. Dr. Suleyman Saritas, Ankara, Turkey (not utilized).- BP GOLDEN SAFETY AWARD. TECHNIP MARITIME OVERSEAS LTD. 05.01.2006,BAKU, AZERBAIJAN.
PAPERS AND BOOKS
- Educational supply: “Calculation and projecting of welding constructions”. 110 p., Baku, 2002.- Monograph: “Improvement of corrosion resistance and antifriction properties of porous materials”. 122 p. Baku, 2003
PUBLICATIONS
-Author and co-author of 35 publications and a Patent (Invention).

::Dec 30, 2007::Jan 30, 2008::2454496::14081970::0::0::0 2032::Mansurkhan::Navlakhi::Gujarat::GU::390001::+91 9377334303::mansur_1979@yahoo.com::Office&&Computer&&Miscellaneous::http://::Over 7 years experience in Cathodic Protection Com ::Over 7 years experience in Cathodic Protection Com::M/s Corrtech – Ahmedabad.
• Corrtech is primarily dedicated to CORROSION CONTROL and specialises in Cathodic Protection to combat corrosion of underground/submarine steel structures/pipelines. Also is geared up to execute Turnkey Projects in the Infrastructure Sector.
• The areas where it has acquired credible expertise through proven past experience include:
• Cathodic Protection System
• Terninal/SV Stations – Electrical / Instrumentation, Mechanical, Structural Works.
• Optical Fiber Cable Laying
• Civil Works

CROSS COUNTRY PIPELINES
• Bay consumer Pipeline Network at Trombay and Uran of Oil and Natural Corporation Ltd, Bombay
• 1113 Km 22” Dia, 220 Km 14” Dia & 1443 Km 10.75" Dia Kandla-Bhatinda Pipeline Project of Indian Oil Corporation Ltd. New Delhi
• 350 Kms. long 18” dia. products pipeline from Vishakapatnam to Vijayawada in Andhra Pradesh, India of M/s Hindustan Petroleum Corporation Ltd.
• HBJ Gas Rehabilition and Expansion Project of Dodsal Ltd. Bombay
• 159.8 Km 28” Dia & 15.3 Km 18” Dia SVK Augmentation Loopline Project of M/s. IOCL.
• 460 Kms. Stretch of Jamnagar Loni LPG Pipeline project of Gas Authority of India Ltd.
• 366 Kms long 24” Dia Mangalore - Bangalore Multi product Distribution Pipeline Project of M/s. MBPL. Ltd. Punj Lloyd Ltd, New Delhi.
• 203 Km long 16" Dia, 4 Km long & 15 Km long 8” Dia Songo-Songo Gas pipeline Project in Tanzania. Larsen and Toubro Ltd.,
• 340 Km long 42” Dia Dahej - Vijaipur Gas Pipeline Project of M/s. GAIL.
• 148 Km 28” Dia, 101 Km 18” Dia & 5 Km 10” Dia Bareja - Navgam & Viramgam - Sidhpur section of Koyali - Viramgam - Sidhpur Product Pipeline. Indian Oil Corporation Ltd, (Year-2003)

PLANT PIPING
• Essar COT Project, Jamnagar
• Nagarjuna fertilizers and Chemicals ltd Hyderabad
• 14'' dia effluent Disposal and 8'' drinking Water Pipelines for Numaligarh Corridor refinery Project. P.Das and Company Calcutta
• Underground pipings, structrues for Gadepan-II Expansion Project. Chambal Fertilizers and Chemicals Ltd Kota
• Product and Intermediate Tanks and Installation of HDPE Pipes in Tank Foundations of Essar Projects Ltd. Jamnagar
• Nagarjuna Fertilizers and Chemicals ltd. Kakinada
• Undergorund Plant piping of Oswal Chemicals & Fertilizers Limited,
• Underground Cooling water, Fire water and Raw water piping network at UP Petrochemical complex, PATA, of M/s. Gas Authority of India Ltd, Pata, U.P.
• Haldia Petrochemicals Project at Haldia, West Bengal
• Oswal Chemicals and Fertilisers Ltd. (OCFL) Paradeep Phosphatic Fertiliser Project
• Ethanol tanks at Haziara MPC terminal of Reliance industries Ltd. Mumbai
• NG3 Project at Hazira Complex of Reliance Industries Ltd. Hazira, Surat.
• Underground piping in Crude-2 of Reliance Industries Ltd. Jamnagar
• Underground piping in Crude-1 of Reliance Industries Ltd. Jamnagar

PIPELINE LAYING:
• Utility Piping and Plant Piping job for M/s Arvind Mills Ltd. Ahmedabad
• Mechanical Piping, Civil, Electrical, Instrumentation works for SV station , Terminal works at Mortha, HDPE Conduit and Optical Fiber cable works and other allied works of GAIL work for "Tatipada - Kondapalli Gas Pipeline Project - Section -II"
• Laying of Feeder Lines, Spur Lines and Associated works for Vizag - Secunderabad LPG Pipeline Project of M/s. GAIL
• Electrical, Instrumentation & Civil Works for SV Stations and other allied works for Spread -3 of Vizag Secunderabad LPG Pipeline Project of M/s. GAIL.
• Alignment Sheet, Crossings, Terminal, Isometric & 2D drawings of 16” NB pipeline from Vagodia to Ranoli and 8” NB pipeline of Ranoli IPCL to GIPCL of SGPL LPG Pipeline Project of M/s. Gas Authority of India.
• Alignment Sheet, Crossings, Terminal, Isometric & 2D drawings of 12” dia 15.3 Km long pipeline from Kalol – Arvind Santej of Pipeline Project of M/s. Gujarat State Petronet Ltd, Ahmedabad.::Dec 26, 2007::Mar 28, 2008::2454554::india2007::1::0::0 2031::Krishnakumar G. Nair::6, Nishigandha, Chinchpada, Post: Pen -402107,::District: Raigad, Maharashtrsa, India::MH::402107::009660560081478::kg_nair@hotmail.com::Engineering&&Certified or Licensed&&Inspection::http://::Senior CP Engineer ::NACE Certified Senior Corrosion Technologist & MICorr::NACE - USA Certified 6523 Senior Corrosion Technologist & MICorr grading from Institute of Corrosion - UK, having over eighteen years working experience in corrosion engineering and cathodic protection technology services since 1985. Worked in various capacities (like Corrosion Technician, CP Technician, Senior CP Technician, CP Supervisor, Technical Manager & Corrosion Engineer, CP Inspector, CP Specialist, CP Projects Engineer). Worked in countries: INDIA, BANGLADESH, BAHRAIN, QATAR, OMAN, KUWAIT, UAE & KSA included. Area of expertise include Detailed Engineering, Planning - Scheduling - Supervision, CP Surveys, Installations, Testing, Commissioning, Post Commissioning Surveys, Monitoring, Maintenance, Trouble-shooting, QA/QC Inspection & Record, Reports, O & M Manual etc. Available for employment with prospective employer/s after April 2008. ::Dec 20, 2007::Mar 22, 2008::2454548::proprietor::0::0::0 2030::Hugo Rojas::Villa de Caney, A5 Aracibo St.::Trujillo Alto::PR::00976::(787) 344-8878::hugo_j_rojas@yahoo.com::Intern&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://::Civil/Corrosion Engineer in Training ::Looking for an opportunity in the corrosion engineering industry::Summary

Certified Engineer in Training
Solid background working with AISC Steel Construction Manual, ACI – 318 Building Code Requirements for Structural Concrete, ASCE 7 Standard & 1997 Uniform Building Code
Bilingual; excellent verbal and written communications skills in both, Spanish and English

Education

Bachelor of Science in Civil Engineering
Polytechnic University of Puerto Rico

Work Experience

February 2007 – Present
Transportation/Civil Engineer
DMJM Harris | AECOM San Juan, PR
Tren Urbano Rail Transit Project

Provide oversight for Tren Urbano (TU) project; a heavy rail transit project of Puerto Rico’s Department of Transportation (DTOP) extending through most of San Juan’s Metropolitan Area.

Duties include:

Perform inspections, audits and provide oversight on areas such as Corrosion Control and Automatic Fare Collection (AFC) to assure contractor’s compliance with contract’s QA/QC specifications

Provide support to the client in the preparation of reports for DTOP and FTA as well as in the review of proposals

Perform as TU Intermodal’s Department lead consultant for TU Transit Survey project

Appointed as corrosion control engineer in training for the proyect.

This position requires attendance to a training and mentoring program established to prepare project’s personnel to perform different operational and maintenance procedures of transit projects such as oversight, QA/QC and system inspections among others.

February 2006 – February, 2007,Civil Engineer Assistant
MCA Engineering Consultants
Guaynabo, PR

Participated in design review of cantilever sheet pile stability analysis and assisted in creating computerized models using SAP2000 analysis program. Provided technical support as requested for arbitration cases.

November 2006 – January, 2007,Civil Engineering Internship/Practice
Alerión Builders Corp.
Project: Veredas del Mar @ Vega Baja, PR

This internship experience provided an opportunity to: develop skills in project inspection and construction management, exercise knowledge of these fields obtained through my bachelors’ degree and obtain further knowledge about: construction project supervision, project engineer’s duties/responsibilities, personnel and equipment management.

Educational Experience

Civil Engineering Capstone Design
Tren Urbano Plaza, Carolina, PR

As part of the Civil Engineering Capstone Design course; developed a concept for Tren Urbano (TU) Plaza project which consisted of: urban planning, preparation of an Environmental Impact Assessment, structural, transportation and hydrological design. Structure to be used as TU Plaza was a steel frame designed under AISC and UBC specifications. Structural design was performed manually; 3D computer modeling software was used to verify proper structural behavior under service, hurricane and seismic loads. This project was presented to and evaluated by Civil Engineers and Urban Planners from the Puerto Rico Department of Transportation who were extremely satisfied with the project and considered implementing some of the recommendations for a future Tren Urbano extension to Carolina.

Professional Memberships

College of Engineers and Land Surveyors of Puerto Rico (CIAPR)
American Society of Civil Engineers (ASCE)
National Association of Corrosion Engineers (NACE International)

Continuos Education

November 2007
NACE Basic Corrosion Course – 3.6 credit hours
Approved exam - 89%

Software Training

ETABS – Intermediate experience, 4+ years
SAP 2000 – Intermediate experience, 5+ years
AutoCAD – Basic experience, 2+ years
HCS 2000 – Basic experience
Maximus RailFocus – Intermediate experience, 1 year
Microsoft Software (windows, Office, etc.) – Proficient, 12 years


References furnished upon request::Dec 18, 2007::Mar 20, 2008::2454546::mranderson::0::0::0 2029::Raghuvir Singh::NML, Jamshedpur::Jamshedpur::Jharkhand::831007::09931110530::raghujog@yahoo.co.in::Management&&Engineering&&Research::http://::Position Desired:Research ::For Research Scientist/Corrosion Engineer/PDF position:: CURRICULUM-VITAE

raghujog@yahoo.co.in; rsr@nmlindia.org
Born on 20th August 1968
Educational Qualification
Ph.D.: Indian Institute of Technology (IIT), Roorkee (Formerly University of Roorkee) during the year 1991-97 on “Corrosion Investigation on Materials of Bleach Washers”

M.Sc. : in the year 1988-90 in Physics

Nationality : Indian

Academic Achievements :

Recipient of BOYSCAST Fellowship for 2003-04 from DST, Govt. of India

International Visit :to the Department of Materials Science & Engineering The University of Tennessee, Knoxville, TN, USA.

Present Employer & Position: ‘Scientist at reputed research organization in India

Experience (Post Ph. D.) : 10 years (approximately)

Phone : (0657) 2434617 (Residence)
09931110530 (mibile)
Expertise in :
1. Corrosion Evaluation techniques (both
electrochemical and plant Exposure)
2. Sensitization, intergranualar corrosion and
intergranular stress corrosion cracking of
stainless steels
3. Sample preparation
4. Microstructural characterization
5. Laser surface modification for corrosion and
wear properties enhancement

Research Interest

· Corrosion science & engineering
· Sensitization, intergranular corrosion and
stress corrosion cracking
· Corrosion of cold worked structures
· Laser surface modification
· Grain boundary engineering
·

Publications in Peer Reviewed Journals

Communicated

1. Modification of Sensitization Resistance of Metastable Stainless Steel by Thermo-mechanical Processing Through Changes in Grain Size and Grain Boundary Character Distribution
Acta Materialia.

2. Preparation and characterization of sol-gel derived yttria doped zirconing coatings on AISI 316L
Surface Coat. & Technol.

3. Reutilization of waste oil for temporary corrosion protection,
Materials Chemistry and Physics

Year : 2008 (to be appeared)

4. Laser Surface Processing of Ti6Al4V in Gaseous Nitrogen for Bio-medical Applications.
J Material Science: Materials in Medicine (In press)

5. Influence of cold rolling on sensitization and intergranular stress corrosion cracking of AISI 304 aged at 500oC
J Mater Processing Technol. (Accepted)

Year : 2007

6. A Review on Corrosion Degradation and Prevention by surface modification of Biometallic Materials.
J. Material Sciences: Materials in Medicine 18 (2007) 725-751

7. Development and characterization of sol-gel ceramic coatings on AISI 316L for implants applications.
Surface Coat. & Technol. 201 (2007) p 7582-7588.

8. Influence of Texture on Corrosion Behaviour of AISI 304 and 316L Stainless Steel
Metallurgical & Mater. Trans. A 38 (2007) pp.2085-94.

9. The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel
Scripta Mater. 57 (2007) p 185-188.

10. Corrosion protection of steel using waste oils
J. Met. Mater Sci. 49 (2007) p51-58.

Year: 2006

11. Laser Surface Modification of Ti-6Al-4V: Wear and Corrosion Characterization in Simulated Bio Fluid.
J Biomaterial Application 21 (2006) p49-73.

Year: 2005

12. Role of Texture on Corrosion Behaviour of AISI 304 Stainless Steel
Materials Characterization 54(2005), 141-147

13. Effects of Cold Deformation on Intergranular Stress Corrosion Cracking of Stainless Steels.
CORROSION-NACE 61(2005), 907-916.

14. Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti-6Al-4V in Simulated Bio Fluid.
Surface Engineering 21(2005), 297-306.

15. Tribology of Laser Surface Modified Stainless Steel suitable for Biomedical application.
J Material Science 40 November (2005) 5619-5626

Year: 2003

16. The Effects of Cold Working on Sensitization and Intergranular Corrosion Behavior of AISI 304 Stainless Steel
Metall. & Mater. Trans. A, Vol 35A, October 2003,p 2441-2447.

17. The application of electrochemical technique to determine the porosity of electroless nickel coating from hypophosphite bath
Anti-Corr Methods & Mater. Vol 50 (2), 2003,p121-128.

Before 2003

18. In-plant corrosion test on superaustenitic stainless steels in bleach plant of paper mill.
Indian J. Chemical Tech 9 (3), 2002,p141- 47.

19. Effect of filtrate recycling on corrosion of stainless steels in hypochlorite solutions
J. Electrochem. Soc. India, 50 (1)2001,p21-269.

20. Corrosion of stainless steels in chlorination washer of Indian paper industry
J. Met. & Mater. Science 42(2), 2000,p 113- 119.

21. Corrosion protection of stainless steels in chlorinated solutions by electrochemical technique
NML Tech J. 41(3), 1999

22. Tape coating –A review
NML Tech J. 40 (4), 1998

23. Corrosion study of stainless steels in peroxide bleach plant media
Tech. Assoc Pulp & Paper, 78 (12)1995

24. Covering of bleach washers for material friendly environment
Indian Pulp & Paper Tech Assoc 5 (4) 1993

25. Electrochemical study of bleach plant media
Bull. Electrochem. 9(8-10) 1993

Book chapter

1. Corrosion monitoring and evaluation practices
“Industrial corrosion evaluation and mitigation ( ICEM)” Editors I. Chattoraj, Raghuvir Singh, A Mandyan, S. Ghosh

Publications in proceedings

1. Energy, Environment and Electrochemistry held at CECRI Karaikudi, Chennai, India.

2. In plant corrosion tests on special stainless steels in bleach plant of paper mill.
National Congress on corrosion controll, April 1995
held at New Delhi, India.

3. Intergranular corrosion of deformed SS-304
Proc. National seminar on corrosion & its prevention (NSCP-2001) held during December 13-14,2001 at NML, Jamshedpur (India)

4. Effect of deformation on sensitization-desensitization behavior of stainless steels
Published in Proc. National convention on corrosion (CORCON-2002)(East Asia Pacific regional Conference) held at Goa (India) during November 28th-30,2002 organized by NACE international, India Section.


::Dec 18, 2007::Mar 20, 2008::2454546::pauri68::0::0::0 2028::NICOLAE DUMITRU SANDRU::SIPOTE NO.3, BL.151B, SC.A, AP.9, PLOIESTI, PRAHOVA, ROMANIA::PLOIESTI::RO::2000::0040741929057::nikdia20032002@yahoo.com::Inspection::http://::SENIOR COATING & INSULATION INSPECTOR ::NACE LEVEL#2 COATING INSPECTOR CERTIFIED::Mobile Tel: 0040 741 929057/0040244557238
Ploiesti, Romania,
E-mail: nikdia20032002@yahoo.com

SANDRU DUMITRU NICOLAE
NACE CERTIFIED LEVEL II COATING INSPECTOR(CIP No.15960)
Objective
• A challenging and invigorating position, which will optimally exploit my educational qualification and experience.
• To handle the position of Senior Coating & Insulation Inspector in the industries like Petrochemicals, Oil and Gas, Power projects, Industrial construction, engineering manufacturer.

Professional Experience and Capabilities
• Developing Inspection & Test Procedures for the client to suit different Coating requirement.
Destructive Test Instruments – Tooke gauage, Barcol/Pencil/shore impressor hardness, Adhesion Testing viz. Dolly Pull off/Digital Peel testing (for Thermoplastics)/X-cut/Tape Pull off, Comb gauge.
• Non-Destructive Test Instruments - Magnetic Pull off /Electro magnetic/Eddy current Thickiness gauges, Surface profile viz. Replica Tape, Rougness gauge/ISO & Kean-Tator Comparators, Low Voltage & High Voltage DC/AC holiday detectors, Sling psychrometer, Salt contamination Meter.
• Field & Laboratory Testing Procedures for External & Internal Pipe coating – Soluble Iron/chloride level determination using Bresle test kit, CSN test kit, Pin Hole, Solvent Rub, Bend, DSC, Gel time, Moisture Content, Sieve Test analysis.
• A skilled communicator, in both written and oral form, able to develop and lead a multinational team. Experienced in working in difficult and remote locations and managing operations with minimal supervision from head office.
• Coating and insulation engineer, keen to accept fresh challenges, adaptable to changing environments. Innovative skills to solve technical problems and conduct coating and insulation failure analysis.
• In-depth understanding of the protective coating performance and market demand from end user point of view.
• Strong background in characterization of coatings, fully conversant in all aspects of surface preparation, paintings, coatings, inspections and procedures relating to specifications and documentations.
• Experience with Hot Insulation like, Slabs, Mats and formed sections of Rock wool, Mineral wool, fiber glass and Ceramic wool, different kind of steel and not-steel piping.
• Knowledge of all types of refinery equipment: columns, drums, heat exchangers, furnace, boilers, flares, tanks, and piping and issue recommendations for repair of corroded or damaged components.

Personal Data
• Nationality: Romanian.
• Qualification: M.Sc. -Oil and Gas Process Engineer for Petrochemical & Refinery Industry.
• Education: Oil & Gas Institute, Faculty of Petrochemical and Refinery Engineering-graduation year 1991.
• Foreign Language: English, Romanian.

WORK EXPERIENCE
February 2007 –up to present: AGIP KAZAKHSTAN NORTH CASPIAN OPERATING COMPANY N.V.
KASHAGAN EAST FIELD DEVELOPMENT EXPERIMENTAL PROGRAMME, AGIP KCO CONTRACT NO.2003-0162/0163/0164
Senior Coating & Insulation Inspector
• Assigned to AGIP KCO, KDPC ESKENE WEST KASHAGAN SITE, ATYRAU CITY KAZAKHSTAN, CAM-1/KTO/KIB/KPP/KUT, to oversee the overall daily Inspection Reports of abrasive blasting/painting and hot dip galvanizing/hot and cold insulation/acoustic insulation/wrapping of carbon steel underground pipes/refractory lining activities, by issuing painting inspection reports & insulation inspection reports on a daily basis, for all COT tanks-north offsite extension, LPG station, Central Control Buildings, laboratory, utilities, power generation, mechanical and E/I workshop, pipe rack 51 A/B, pipe rack 53 D/E/F, pipe rack 52 A/B.
• Ensure that the require technical competencies in insulation work are sustained for the qualified and specialized Contractor and Sub-contractor staff at all levels and to provide mentor-ship for the development of insulation technical professionals.
• Keep abreast of all standards and contract regulation, as it affects insulation works execution. Participate in evaluation, analysis of problems and them resolution.
• Supervise inspection programs and prepare, review / evaluate inspection reports & test results; develop recommendation of required work to avoid reduction in operating parameters.
• Monitoring the execution of Hot and Cold Cryogenic Insulation.
• Preparing the daily work schedule and the weekly work plan, that includes man power, equipment, materials, and working hours.
• Inspection for surface preparation and painting inspection as per specification.
• Conduct holiday inspection for under ground pipe coating/wrapping.
• Identify & report Non-conformities to specified requirements. Verify agreed corrective action.
• Supervise inspection programs and prepare, review / evaluate inspection reports & test results, develop recommendation of required work to avoid reduction in operating parameters.
• Co-ordinate with construction, operations and maintenance to schedule inspection activities.
• Carrying out evaluation tests for the coating systems proposed by suppliers for a new
Project, that includes review of products data sheets, carrying out actual site application of products, evaluating quality and performance of coating systems through site and laboratory tests as per standards specified, assessment of a supplier compatibility for Registering to client’s vendor list.
• The Quality Control tasks
July 2005 –September 2006: SNAMPROGETTI GENEVA
WLGP NC-41 Gas Plant Project, Mellitah, Libya
Coating & Insulation Superintendent
• Assigned to Snamprogetti Lummus Gas LTD for AGIP GAS BV LIBYA BRANCH, NC-41,MELLITAH PLANT, natural gas processing plant, 3 trains-50 million man hour’s project, to oversee the overall daily Inspection Reports of abrasive blasting/painting and hot dip galvanizing/hot and cold insulation/acoustic insulation/wrapping of carbon steel underground pipes/refractory lining activities, by issuing painting inspection reports & insulation inspection reports on a daily basis.
• Preparation of Quality Control Inspection packages, including Quality Inspection Plans (QIP), Inspection Report/Checklist (IRCL’s).
• Effectively manage on-going coating and insulation subcontractor’s activity to ensure they are completed to forecast schedule and budget.
• Inspection and monitoring of application of insulation as specified in Quality Control Procedure and Project specification and ITP’s.
• Inspection of cryogen insulation of different equipments in Sulphur Plant, process equipment and Piping.
• Ensure subcontractor activities-HYUNDAI, BONATTI, MEDITERANEAN PROGETTI-BENTINI, SECC, are carried out in accordance with the approved customer FQCP- Field Quality Control Plan and ITP-Inspection and Testing Plan.
• A close working liaison with the customer AGIP GAS BV painting supervisors and subcontractor painting inspectors in order to ensure conformity to standards and specifications.
• Participate in client and subcontractors clarification meetings.
• Troubleshoot coating and insulation problems as they occur.
• Daily and weekly progress and documentation reports were submitted to the clients AGIP GAS BV and QC department.
• Review client and subcontractors documentation.
• In charge with review of ITP and painting procedure and witness qualification of paint systems, weather parameters monitoring, inspections of surface preparation, WFT and DFT check after each layer coating and final painting for visual check for blisters, air bubbles, cracks, uneven painting thickness, paint drifts, witness of bond test, holiday tests, for painting/coating.
• Inspection of hot/cold insulation applications including materials inspection, vapor barrier application inspection, insulation thickness check, and rock wool filled density check.
• In charge with close-out PUNCH LIST FORM/SITE QUERRY issued by customer.
Reporting the NCR and punch lists to the Company Representative.
1998 - June 2005: POLY DELTA CHEMICALS Ltd Offshore Drilling Platform Prometeu & Saturn
Coating & Insulation Superintendent

Last date updated: 01.05.2007

::Dec 16, 2007::Mar 18, 2008::2454544::NIKDIA::0::0::0 2027::Pallavi Pharkya::10900 Euclid Avenue, White Building::Cleveland::OH::44106::216-212-4559::pxp65@case.edu::Management&&Engineering&&Research::http://::Position Desired: ::Technical Position in an Industrial Organization ::
EDUCATION
Ph.D. in Materials Science and Engineering Expected Graduation: May 2008
Case Western Reserve University, Cleveland, US
GPA: 3.63/4.00

Master of Applied Science (M.A.Sc) in Materials Engineering July 2004
University of British Columbia, Vancouver, Canada
GPA:3.5/4.00

Bachelor of Engineering in Metallurgical Engineering May 2002
Malaviya National Institute of Technology, Jaipur, India
GPA: 3.75/4.0 (First Class with Honors)

SKILLS
•Electrochemical Experimentation & Characterization: Potentiodynamic Polarization (anodic and cathodic), Potentiostatic/Galvanostatic Polarization, Electrochemical Impedance Spectro-scopy, Mott-Schottky Analysis, Rotating Disk Electrode technique, Crevice Corrosion Testing
•Materials characterization: TEM, XPS, AES, SEM, EDS, BSI, XRD, Confocal Laser Scanning Microscope, hardness testing
•Modeling Softwares: OLI software, FactSage
•Electrochemical and surface analysis softwares:Corrware/Corrview, Zware/Zview, EC-lab, Softcorr, Zsimpwin, Multipack
•Fabrication: Ball milling (fabrication of PEM Fuel Cells Catalysts)
•Design and Computer Skills: Minitab, Mathematica, Origin
•Extensive writing and presentation skills

RESEARCH EXPERIENCE
Research Assistant, Case Western Reserve University (August 2004- Present)
PhD. Thesis: Study of Passive Oxide Films on alloy C22,a Crystalline Ni-Cr-Mo-(W) and SAM1651,an Iron-base amorphous alloy
- Worked in a multi-university collaboration on corrosion consisting of 9 universities and 4 national labs under the auspices of Department of Energy (DOE), USA.
- Investigated corrosion properties on alloy C22,the material designated for canisters for disposal of high energy and spent nuclear waste in the proposed repository at Yucca Mountain, Nevada, and on SAM1651,the material proposed to be thermally coated on the canisters to increase corrosion resistance under aggressive conditions.
- Investigated passive film properties and mechanism of passive film formation on these alloys using anodic and cathodic potentiodynamic polarization, EIS, M-S analysis, XPS, AES, SEM
- Theoretical and experimental experience in set-up and analysis of crevice corrosion of alloy C22 and SAM1651.
- Modeling solution chemistry to determine evolution of environment (pH, species formation/precipitation etc.) on the waste packages in yucca mountain repository.
- Involved in preparing quarterly reports and reviewing research manuscripts of various projects under this research collaboration.


Research Assistant, University of British Columbia (2002- 2004)
M.S.Thesis: Fabrication and characterization of Pt-Co electro-catalysts for oxygen reduction reaction in polymer electrolyte fuel cells.
- Performed fabrication of varied compositions of Pt-Co/C electro-catalysts for polymer electrolyte membrane fuel cells using ball milling technique. Electrocatalysts fabrication was performed in collaborations with National Research Council (NRC-CNRC), Vancouver.
- Performed structural and electrochemical characterization using TEM, SEM, XPS, XRD, EDS, potentiostatic polarization and cyclic voltammogram.

Research Scholar (Senior Year, B.E.), Indian Institute of Technology, Roorkee, India, (2001-2002)
- Studied corrosion properties of alloy Inconel718 at high temperature using SEM, XRD and corrosion analysis by weight loss method.

Intern, Materials Science Division, Bhabha Atomic Research Center, Mumbai, India
(Summer 2000)
- Studied bonding parameters like chemical effects (reaction between bonded surfaces), inter-layers (to accommodate large thermal expansion coefficient mismatch) and surface structures (e.g.: roughness, microstructure at bonding interface) of diffusion bonding of titanium to alumina. Interface was studied using electron probe micro-analysis, micro-indentation and optical microscopy.

Intern, Jamna-NHK-Allevard Suspension Components Ltd, Gwalior, India (1999)
- Performed extensive study of various heat treatment processes, such as annealing, quenching and tempering used in making automobile suspension components.
- Performed micro-structural analysis of steel samples and examined chemical analysis processes and quality control tests as per standards coupled with technology investigation.

TEACHING ASSISTANT
Case Western Reserve University
Applied Thermodynamics (Fall 2004&06); Environmental Effects of Materials
Behavior (Spring 2005)
University of British Columbia
Metallurgical Thermodynamics II (Fall 2002&03); Pyrometallurgy, (Spring 2004),
Structures and Properties of Materials (Spring 2004)
-Taught lectures, prepared, evaluated and graded exams and assignments.

HONORS AND AWARDS
- Case Prime Fellowship for pursuing research at Case Western Reserve University
- NACExpo 2007 Cleveland Section Travel Scholarship
- Graduate fellowship for pursuing research at University of British Columbia
- Mary Jane Murrin award, UBC, 2003
- Honors in Bachelor of Engineering, MNIT, 2002

PUBLICATIONS
•P. Pharkya, Joe Payer, “Durability of passive films on amorphous SAM1651 and crystalline C22 in concentrated hot chloride solutions”, in preparation
•P. Pharkya, Xi Shan, Joe Payer, “Methods to examine corrosion damage evolution for Fe-Based amorphous alloys”, Proceedings of MS&T, Detroit, US, September 17-20,2007,transcript accepted
•P. Pharkya, Xi Shan, Joe Payer, “The effect of anions on the passive film properties and localized corrosion behavior of alloy C22,” Proceedings of 210th meeting of Electrochemical Society, Cancun, Mexico, October 29,2006,transcript accepted.
•P. Pharkya, A. Alfantazi, Z.Farhat, “Fabrication using high-energy ball milling technique and electrochemical characterization of Pt-Co electro-catalysts for oxygen reduction in PEM fuel cells”, Journal of Fuel Cell Science and Technology (2005), 2(3), 171-178
•P. Pharkya, Z.Farhat, E.Czech, H.Hawthorne, A.Alfantazi, “Fabrication and characterization of nano-structured mechanically alloyed Pt-Co catalysts for oxygen gas-diffusion-electrode”, Proceedings of Hydrogen and Fuel Cells Conference and Trade Show, Vancouver, Canada, June 8-11,2003

PRESENTATIONS
•P. Pharkya, X. Shan, H. Ha, Joe Payer, “Corrosion study of highly corrosion resistant bulk metallic glasses”, Poster, Case Research Showcase, Cleveland, 2007
•P. Pharkya, “Repassivation behavior of crystalline alloy C22 and amorphous SAM1651 in Hot Chloride Solution”, Poster, NACExpo07,Nashville, March 14-17,2007
•P. Pharkya, X. Shan, Joe Payer, “The effect of anions on the passive film properties and localized corrosion behavior of alloy C22,” 210th meeting of Electrochemical Society, Cancun, Mexico, October 29,2006
•P. Pharkya, Xi Shan, Joe Payer, “Corrosion cells beneath thin films, particulates and deposited layers: Electrochemical studies of passive film”, Poster, Case Research Showcase, Cleveland, 2006
•P. Pharkya, A. Alfantazi, Z.Farhat, “Fabrication using high-energy ball milling technique and electrochemical characterization of Pt-Co electro-catalyst for oxygen reduction in PEM Fuel Cells”, First International Conference on Fuel Cell Development and Deployment, Storrs, Connecticut, US, March 7-10,2004
•P. Pharkya, Z.Farhat, E.Czech, H.Hawthorne, A.Alfantazi, “Fabrication and characterization of nanostructured mechanically alloyed Pt-Co catalysts for oxygen gas-diffusion-electrode”, Hydrogen and Fuel Cells Conference and Trade Show, Vancouver, BC, Canada, June 8-11,2003

PROFESSIONAL AFFILIATIONS
NACE, ECS, TMS, AMS

SERVICES TO THE UNIVERSITY
Case Western Reserve University
President: Graduate Materials Society, 2006- 2007
Interim Graduate Student Senator, Department of Materials Science and Engineering, 2006

University of British Columbia
Vice President: International Students Association, 2003-2004,Departmental Councilor for Graduate Students Society, Department of Materials Engineering, UBC, 2003-2004,Treasurer of Joint Student Chapter’s Conference, 2004,Safewalker in the university’s prestigious Security Safewalk Program, 2003-2004

Malaviya National Institute of Technology
Branch coordinator for campus recruitment team, 2001-2002,Volunteer in literacy mission, Master of Ceremony for various cultural and sports events at college level
::Dec 5, 2007::Mar 7, 2008::2454533::yashoda9::1::0::0 2026::Laxmi Narayan Das::Plot No. 944/4, Friend's Colony, Near Kenal Road, ::Rasulgarh, Bhubaneswar, Orissa::Or::751010::9825109983::dasln@rediffmail.com::Management&&Office&&Engineering&&Certified or Licensed&&Research&&Inspection::http://::Position Desired: Corrosion Expert/Painting Expert ::Certified Corrosion Expert::LAXMINARAYAN DAS
E – mail: dasln@rediffmail.com ; dasln@yahoo.com
Mobile: +919825109983(O), +919238580001

PERSONAL PROFILE:

· Date of Birth : June 12 - 1973
· Nationality : Indian
· Marital Status : Married
· Language : English, Hindi, Oriya
· Passport No : F0737293
· Contact/Permanent Address: C/o Mrs. Jyotirmayee Das
Plot No. 944/4,Friend’s Colony,
Gada Gopinath Prasad, Near Canal Road,
Rasulgarh, Bhubaneswar (Orissa), India
Ph: 91-0674-2370330

PROFESSIONAL PROFILE:

Educational Qualifications
Examination Year of Passing Institute details Percentage/CGPA
BGAS-CSWIP Painting Inspector, Grade 3 & 2 2007 TWI, UK Grade-II
Certified Welding Inspector 2006 American Welding Society CWI
M. Tech.Surface Sc. & Engineering(Corrosion & Surface Coating Spl.) 2000 NIT, Jamshedpur 8.95/10 C.G.P.A.
M. Sc. in Chemistry(Industrial Chemistry Spl.) 1997 Sambalpur University 64. 9%
B.Sc.-PCM (Chemistry Honours) 1994 Utkal University, Orissa 67. 37%
Higher Secondary (Orissa) 1990 CHSE, Orissa 55%
S.S.C (Orissa) 1988 BSE, Orissa 65%

Experience:

Total 9 Years 0.5 Months

Expertise In the field:

1. Corrosion Control Project Management,
2. Corrosion Audit & Monitoring
3. High Performance Coating Formulation for Offshore and Highly corrosion prone environments/Manufacturing of coatings/Corrosion Lab set up/Application & Inspection at sites.
4. Recommendation, Laying Spec. , WI, QAP, Inspection and implementation of corrosion measures.
5. Hot Dip Galvanizing, Metallizing, CGL (GI/GL sheet quality), Electroplating, Powder coating, and Anodisisng.
6. Painting Inspection as per international practices
7. REBAR corrosion control, SS corrosion.
8. Transmission Line Corrosion Control
9. Microelectronics & PCB corrosion control
10. Vendor Appraisal/Selection/Handling
11. Water Proofing
12. VCI Packaging
13. Paint shop, Thermal Spray system, Grit Blasting Booth Installation

DECLARATION
I hereby solemnly declare that all the above informations given are true and correct to the best of my knowledge & belief.
Place: DAMAN LAXMI NARAYAN DAS
Date: 27th November 2007 (Signature)
::Dec 1, 2007::Mar 3, 2008::2454529::paints::1::0::0 2025::Eyad::Dammam Saudi Arabia::Dammam::DM::31452::00966502686132::eyadhariri@hotmail.com::Management&&Office&&Engineering&&Certified or Licensed::http://::Cathodic Protection Engineer/Designer ::Cathodic Protection Engineer/Designer::Over 12 years proven experiences in electrical installation, design, estimate and maintenance works. Adept at providing technical equipment support and developing new processes through ongoing maintenance, defect resolution and enhancement solutions. Expert in completing demanding electrical works within crucial timelines. Highly articulate, demonstrating excellent interpersonal skills. Strong technical and methodical aptitude with ability to analyse, coordinate and synthesize data. Wide range of expertise in supervising the electrical installations of medium-priced to high-end works. Core competencies include but not limited:

• Cathodic Protection Engineering.
• Leadership and Supervision
• Installation & Maintenance
• Project Management
• Vendor Relationship Management
• Team Building


Career Progression

Engineering Manager Sep-2005 to Present
Specialized Gas & Oil Engineering Company Ltd. www.ikkgroup.com/sogec.htm.com

• Conducting CIPS/DCVG interpretation.
• Supervising simulation of Impressed Current CP systems for Oil wells, flow lines & Trunk lines.
• Responsible for the project finalization and commissioning.
• Performing a combination role of a technical & sales engineer.
• Appling salesman skills and technical knowledge as required tailoring each contract/project according to the client’s needs and specifications.
• Participating in the design process of various Cathodic Protection systems “Sacrificial and Impressed Current”, Pipelines, Tanks, Oil Wells, Water Injection Wells, etc.
• Significantly contributing the computer modeling of cathodic protection systems.
• Assigned as the Engineering Manager and a member of the management team for the division.
• Designing procedures for equipment/system operating and conducting cathodic protection site surveys.
• Preparing detailed designs, drawings, BOM, Operation & Maintenance Manuals, and schedule of work for Execution Department.
Current and Completed Projects under My Supervision:
• Design , Supply of Material , Installation of internal & External CP system for 3 oil fuel tanks- ARAR Cement Plant “Najran Cement plant Twin project”
• Design , Supply of Material, Installation of CP system for 1 Cooling Water Tank and Fire Water system “Deep well ground beds” – SABIC
• Design, Supply of Material , Supervision of Installation for Shoiba Phase-Three water transmission project “Distributed Anode Beds for plant piping, Water Tanks , Cross Country Pipelines”-
• Complete survey, Design and simulation: KHURAIS oil wells, Trunk lines, Flow lines, Water injection Wells and Headers. “420 Oil wells, 14 Trunk lines , 8 Water Injection Headers”

Electronic and Electric Maintenance Supervisor Oct-1999 to Jan 2005
Instructional Media Center-University of Aleppo www.alepuniv.shern.net

• Started as a team member for the maintenance and operation of all equipment used by the center such as LCD projectors, overhead projectors, computers, acoustic labs, CCTV, etc.
• Directly responsible of any other electrical maintenance works at the building and occasionally other equipment used through out the university faculties.
• Effectively conducted periodical maintenance and in some cases with qualified personnel to operate the Acoustic lab.
• Promoted as Head of the Maintenance and Operating Department and managed the department consisted of one workshop and three Electronic/Electric Technicians.
• Assigned as Head of the Purchasing Committee (in charge of purchasing and contacting vendors for supplying electronic, equipment, and accessories used for the educational proposes).
• Managed computer hardware and software maintenance.
• Ensured the high quality works and perfect functionality of devices by studying and reviewing operational manual.

Electronic and Electric Technician Nov-1995 to Sep-1999
The Electrical and Electronic Center- Aleppo Syria

• Maintained, installed as well as distributed industrial electronic and electric equipment such as Circuit Breakers, Relays, Contactors, and Pass bars, Timers, etc.
• Started at the company as an Assistant Electric Technician with the switch gear and control boards assembly team
• Accustomed to the local brands of equipment and market standards.
• Promoted and transferred to the installation and maintenance team.
• Participated with in the installation and maintenance of industrial control and distribution boards as well as the deployment of Industrial electric networks.
Educational Achievements

Masters in Business Administration (Sep 2008)
University of Liverpool

BSc in Electronic & Electrical Engineering Sep 2005
Faculty of Electronic & Electrical Engineering - Aleppo University.
Graduation Project: PC-ECG

Technical Secondary Study Diploma “Industry Branch” Sep 1995
Fifth Technical Secondary School of Aleppo
Branch Electronics Vocation

Professional Qualifications
• Cathodic Protection Design “Pipelines, Tanks, Oil Wells, Water Injection wells”.
• Comprehensive knowledge on OrCad electronic design program suit "Capture, Layout, and Pspice".
• Comprehensive knowledge on Proteous Electronic Simulation Program.
• Comprehensive knowledge on Atmel’s 8051 microcontroller family and Peripheral Circuits.
• PC Maintenance.
• Able to quickly understand complex problems and devise effective solutions.
• Able to work independently or within a team.
• Can work under pressure and meet deadlines.
• Sound organizational skills.
• Good grooming and presentation.
• Able to supervise.

Professional Membership
• NACE Certified member level 2 “National Association of Corrosion Engineers” USA Cert. No. 10270
• IEEE Member No. 80550082.
• Member in the Syrian Computer Society (SCS)


Personal Information:
Nationality : Syrian
Social Status : Married
Date of Birth : 1977
Visa Status : Work Permit
Driving License : Saudi Arabian and Syrian
Availability : 8 Weeks
Language Skills : Arabic (Native), English (Excellent Oral & Written), German (Fair Oral & Written)


References available upon request
::Nov 27, 2007::Feb 28, 2008::2454525::1191977::0::0::0 2024::David Ramsey::P.O. Box 403::Lost Creek ::WV::26385::304-641-5981::dramsey@cebridge.net::Management&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://::Position Desired: ::NACE, API, ASNT, OSHA Inspector:: David M. Ramsey
P.O. Box 403 • Lost Creek WV 26385 • (304) 745-4516 • (304) 641-5981

Objective

To obtain long-term employment, where my skills, positive attitude, and ability to work great with others will be an asset to the company.

Qualifications

Fourteen years of progressive experience in the inspection field with certifications in NACE Corrosion Technician, API 510,API 653,OSHA 500 outreach trainer, ASNT Visual, Liquid Penetrant, Magnetic Particle, Ultrasonic, Eddy Current, Positive Material Identification, and Assistant Radiography.

Experience

Equitable Resources Clarksburg, WV
Technical Trainer / Compliance Inspector May 2004 to present
· Inspect Equitable Resource sites, employees and contractors for compliance with EQT Work, Operating, and Safety Standards. Federal DOT, OSHA, API, ASME, NFPA, and NEC and make comments and recommendations to others to ensure our compliance with the applicable codes and standards.
· Assist in conducting Operational Qualification trainings and Safety trainings for WV, KY and VA.
· Train and certify welders to API 1104 and API 1107
Corrosion Technician
· Installed Cathodic protection systems, conducted close interval surveys, monitored test stations, and conducted bi monthly rectifier checks.
· supervised the installation of cathodic protection equipment and test stations on all new lines constructed in the Prestonsburg KY district.
· Assisted in the GIS of over 160 miles of transmission lines, used to establish High Consequence areas and identified and verified such areas.

Law Engineering / Mactec Canton, OH
Pressure Vessel, Pressure Piping, and January 2000 to February 2004
Above Ground Storage Tank Inspector
While working for Law Engineering / Mactec my duties were as a subcontractor for Marathon Ashland Petroleum Refinery in Catlettsburg Kentucky.
· Assisted as job site Supervisor
· Instrumental in the development of a program for prioritizing, ciruitizing, and inspection of over 581 piping circuits consisting of over 345,739 feet of transfer piping.
· Performed API 510,API 653,Visual, Magnetic Particle, Liquid Penetrant, and Ultrasonic Thickness Inspections.

MQS Inspection Woodlawn, OH
Non-Destructive Testing Inspector January 1997 to January 2000
Worked as a contract inspector in local Power Plants, Oil Refineries, and Chemical Plants such as Muskingum River Power Plant, Pleasants Power Station, Marathon Ashland Petroleum, FMC (Nitro, South Charleston, & Roan Pulonc), Union Carbide, AK Steel (and Coke Plant), Aerostech, DOW Chemical, 3-M Plant, Chevron and other local utilities.
· Job site supervisor.
· Inspected Process piping, Pressure Vessels, and Storage tanks.
· Reviewed documentation and prepared reports through electronic data management.

United States Navy Norfolk, VA
Hull Maintaince Technician Third Class Petty Officer January 1991 to January 1997
· Performed Non-Destructive Test Inspections on nuclear and non-nuclear components of surface ships and submarines.
· Repaired Ships and Submarines by regular Maintaince as a Ship fitter, Welder, Pipe fitter, Valve Repair, Flex Hose Repair.
· Certified and maintained records of all Welders and Braziers onboard ship.

Roberts Welding Hedgesville, WV
Field and Shop Structural Welder July 1990 to Jan 1991
· Repaired and build aluminum anode tables.
· Created and installed handrails and catwalks for a major food companies.

Education

West Virginia University Morgantown, WV
OSHA 500 Trainer 2007
National Welding Inspection School Houston, TX
Certified Pipeline welding inspection 2006
Appalachian Underground Corrosion Short Course West Virginia University, WV
Advanced, Intermediate, and Basic Course 2004,05,06,07
Bay Technical and Association Inc. Orange Grove, TX
Storage Tank Inspection API 653 Diploma 2003
Schindler and Associates Inc Houston, TX
Pressure Vessel API 510 Diploma 2000
Service School Command San Diego, CA
Non-Destructive Test Inspection (Nuclear and Non-Nuclear) Diploma 1993
Hull Maintaince Technician A School Philadelphia, PA
Hull Maintenance Diploma 1991
Welding, Brazing, Pipefitting, and sheet metal
Braxton County High School Flatwoods, WV
Diploma 1990

Active Certifications

· Certified Pipeline Welding inspector
· NACE Corrosion Technician
· API 510 Pressure vessel inspector
· API 653 Storage tank Inspector
· OSHA 500 Outreach Trainer


Military

· Six-year naval service
· Southwest Asia Service Medal
· Kuwait Liberation (Kuwait, and Saudi Arabia) Medals
· National Defense Medal
· Sea Service Medal
· Meritorious Unit Medal
· Navy Battle E Medal

::Nov 9, 2007::Feb 10, 2008::2454507::1749::1::0::0 2023::Joe Warren::11377 Aqua Rd::Houghton Lk::MI::48629::989-422-6421::jwarren26@hotmail.com::Certified or Licensed::http://::Position Desired: ::Field Tech.:: Currently employed by MEARS Group LLC, INC., as field supervisor. I have 3yrs field experience with ECDA, CIS, DCVG, PCM etc.. Certified CP-1 Cathotic Protection Tester.

I am seeking a job in the corrosion field, I enjoy my job, dont mind some traveling, being that I travel all the time now, but would enjoy to be home a little more often.::Nov 8, 2007::Feb 9, 2008::2454506::0918::1::0::0 2022::Azaz Memon::Baroda, ::Gujarat, India::91::390001::009657276139::azaz5116@gmail.com::Engineering::http://::Cathodic Protection Technologist / Corrosion Engg. ::Application for the post of Cathodic Protection / Corrosion Engineer ::CURRICULUM VITAE


MEMON AZAZ MOHD. YUNUS,
Electrical Engineer & NACE Cathodic Protection Technologist (Level 3) # 9831.

DESIRED JOB / POSITION:

Cathodic Protection Engineer & Technologist.

CAREER SUMMARY:

Over 7 years of active experience in the various fields of cathodic protection systems in various environments like Oil & gas fields, Cross country pipelines, vessels / tanks and gas storage bullets, Refinery complexes, Fertilizer plants, Power plants, Chemical plants, City gas distribution, Complex pipeline networks, Off shore facilities (jetty bridges & piles, offshore pipelines, etc.), reinforced concrete structures, etc. in various countries starting from Bidding, Pre design survey and Design data collection right up to Design, Material specification & Procurement, Installation, Testing & Commissioning, Monitoring & Maintenance, Pre & Post Commissioning Surveys like On-Off, DCVG, CIPS, Pipeline health & PSP, Trouble shooting, etc. for Impressed Current as well as Sacrificial Cathodic Protection systems.

KEY SKILLS:

Design of cathodic protection system:
Impressed current & sacrificial anode cathodic protection system for cross country pipelines, plant facilities, tank bottoms, off shore facilities, mounded storage bullets, etc. (new as well as upgradation of existing systems)

Installation:
Deep & shallow anode ground beds, anode flex, sacrificial anode installation (Prepackaged Mg, Zinc ribbon, Aluminum for water tanks and offshore), junction box, bonding box, test stations, solar systems, MMO anode mesh installation for tank bottoms & steel reinforcement in concrete, etc.

Survey:
Soil resistivity, PSP (On-Off), CIPL, DCVG, current drain & demand survey, trouble shooting related surveys, pre-design survey, etc.

Testing & Commissioning:
Impressed current c. p. system (deep ground bed, shallow ground bed, MMO mesh anodes, Anode flex, etc., Sacrificial anode c. p. system (land / aqueous / marine environment including Zn, Mg & Al), Solar systems and upgraded c. p. systems.

Troubleshooting:
Cathodic protection system (impressed current & sacrificial anode) for on shore and off shore facilities, transformer rectifier, current distribution, low protection areas., etc.

Monitoring and maintenance:
C. P. system for plant facilities, under ground pipeline networks, isolated pipelines, tank bottom & internals, solar systems etc.

Pricing & commercial tendering:
Cross country isolated pipelines, tank bottom as well as internal & plant facilities.

Environments worked in:
Cross country pipelines, Fertilizer plants, Refinery complex, Oil & Gas fields, Power Plants, Chemical plants, Off shore areas, City gas distribution networks, etc.

OBJECTIVE:

Having gained the various skills & been exposed to an environment where in stringent quality systems are adhered to or friendly & favorable atmosphere, I look forward for a challenging & creative long term assignment which broadens my knowledge & experience and help me becoming a practical & successful cathodic protection engineer with a professional company which offers a rewarding career utilizing the knowledge, experience & skills I currently possess for mutual growth, development & success in the cathodic protection global market.

EMPLOYEMENT HISTORY:

Please note: The detail information of executed projects and experience can be presented upon request as and when required.

SR. NO. COMPANY WORK LOCATION EMPLOYMENT DURATION POSITION HELD
1
Rawabi Corrosion Technology Company (formerly ABACORP), Al Khobar, Kingdom of Saudi Arabia.
State of Kuwait November’ 2006 onwards Cathodic Protection Technologist
2
BAC Corrosion Control, UK & MEECC (Middle East Engineers and Corrosion Control) - JV, Doha, Qatar.
Republic of Yemen Call out (July to September’ 2006) Cathodic Protection Engineer
3
SPECIALIZED OIL & GAS ENGINEERING COMPANY – SOGEC (Cathodic Protection Services division of Kabbani Construction Group), Dammam, Kingdom of Saudi Arabia.
Kingdom of Saudi Arabia From April’2004 to June’ 2006 Cathodic Protection Engineer
4
CONSULTECH, Cathodic Protection Engineers, Baroda, India
India January’ 2001 to April’ 2004 Cathodic Protection Trainee & Engineer

EDUCATIONAL DETAILS & CERTIFICATION:

SR. NO. UNIVERSITY / INSTITUTE YEAR
DEGREE / CERTIFICATION

1
BVM Engineering College, Sardar
Patel University, Gujarat (INDIA).
2000 Bachelor Degree of Electrical Engineering
2
National Institute of Information
Technology (NIIT), Baroda, INDIA.
2001 Softwares i.e. SQL 7.0,C++, FoxPro and MS Office
3
State Govt. Institute, Gujarat, INDIA.
2002 License of electrical Supervisor
4
National Association of Corrosion Engineers – NACE International, USA.
2006 NACE Certified Cathodic Protection Technologist (Level 3) # 9831


PERSONAL DETAILS AND CONTACT INFORMATION:

Name : Memon Azaz Mohd. Yunus.

Permanent Address : Shiyapura, B/h Gujarati School, Raopura, Baroda 390 001.
GUJARAT – INDIA.

Present Address : Mangaf, Kuwait.

Phone No. : Cell. +965 7276139
: Res. +965 3734701

Email Id. : azaz5116@gmail.com /
m_azzu@yahoo.com /
memon_azaz@hotmail.com


Passport No. : A – 9713513.

Driving License : Valid Indian, Saudi & Kuwaiti (GCC) Motor Car driving license.

Date of Birth : 12th Nov’1979.

Nationality : Indian.

Community / Religion : Muslim (ISLAM).

Marital Status : Married (1 child).

Languages Known : English (Excellent – Read, write & speak),
Hindi (Good – Read, write & speak),
Urdu (Good – Read, write & speak) &
Arabic (Beginner).


Thanks,


Yours friendly,

Memon Azaz.
::Oct 28, 2007::Jan 29, 2008::2454495::humera::0::0::0 2021::William Goldman::5400 County Hwy. 45::Hayden::AL::35079::318-780-2581::wgoldman58@gmail.com::Certified or Licensed&&Inspection::http://::Position Desired: Inspector ::NACE Certified Caoting Inspector #2880:: 5400 COUNTY HIGHWAY 45 • HAYDEN, AL. 35079
PHONE 318-780-2581 • E-MAIL wgoldman58@gmail.com
WILLIAM CARL GOLDMAN II
SUMMARY OF QUALIFICATIONS


To work for a leading marine or commercial coatings manufacturer and utilize my 19 years experience of paint inspection and good customer relations.

Since 2001 I have been doing QC Inspection work for engineering firms in Louisiana and Alabama on commercial buildings and plants. I am wanting a return to my paint inspection roots. Relocation is no problem.

* 1980 - 2000 20 years of coating inspection experience starting on nuclear plants to marine shipbuilding and repair. I am familiar with the use of all types of coating inspection equipment and detailed documentation of all inspections. NACE Certified Coatings Inspector #2880.
EDUCATION

* 1973 - 1976 High school graduate at Leon Godchaux High in Reserve, La.
PROFESSIONAL EXPERIENCE

2001 CTE Engineering-New Orleans, La.
Senior Inspector of highway bridge job which also was lead abatement.

2000-2001 Vulcan Pipe-Bessemer, Al.
QA Inspector of ductile pipe linings. Participated in training of other inspectors and performed audits at other plants under ISO 9001

1992 - 2000
* Jotun Marine Coatings - (office Baltimore, Md.) - Senior Field Technical Representative
Performed inspections of applications of marine coatings in the Gulf region; Major clients included Avondale shipyards of U.S. Navy new builds; Maintained relationships with clients and shipyards throughout the Gulf coast; Performed many surveys and wrote specifications for jobs and submitted proposals for paint when needed; Familiar with all aspects of warranty work and with all paint inspection procedures of NACE and SSPC.

1987 - 1992
* Avondale Shipyards - (Avondale, La.) - QA Coatings Inspector
Performed in process and final inspections of U.S. Navy new buildings and repairs to insure compliance to NAVSEA specifications; Worked with paint manufacturers on testing of new products such as shop primers and epoxy tank coatings.

1980-1987
* Stone and Webster Engineering - (office in Boston Ma.) - Senior QC Inspector
Performed paint inspection of all steel and concrete in the nuclear plants; Inspections were done to strict compliance of plant and federal specifications in two plants, one in St. Francisville, La. And the other in Oswego, New York

REFERENCES

On request
::Oct 25, 2007::Jan 26, 2008::2454492::hgiog1958::1::0::0 2020::Asif Siddiqui::House # R-790 sector 15-A-3 Buffer zone::Karachi::Si::75850::+92-301-8225075::asifbhoy@yahoo.com::Engineering::http://::Position Desired: CP technologist ::Cathodic protection::Asif Siddiqui
Corrosion Technologist

PERSONAL

Name. Asif Siddiqui
Father Name. Abdul Ghani Siddiqui
Date of Birth. September 18,1974
Nationality. Pakistan
N.I.C Number. 42101-0878443-7
Home address. R-790 sector 15-A-3 Buffer zone Karachi, Pakistan
Telephone Home. +92-21-6955363
Mobile. +92-301-8225075
Email. asifbhoy@yahoo.com


ACADMICS.

B.Sc (Physics).
Diploma of Associate Engineer Electronics.
G.C.T Karachi.


TRAININGS & COURSES.

Diploma in Computer maintenance.
Basic Corrosion Course and corrosion Control by Coating (Dr. Chris Ringas).
AutoCAD MS Word, Excel, PP etc.
Portal and Orcad PCB and circuit designer.


PROFESSIONAL EXPERTIES.

Cathodic protection, Pipeline integrity survey.
Presently working with (NPSL) Nuricon
Petroservices (Pte. )Limited.
Karachi. Pakistan. from 5 years as a
Corrosion Technologist.


RESPONSIBILITES HELD.

Supervise, design and schedule all type of Survey CP Installation, maintenance / repair projects.
Schedule field crew / job to achieve best output and
operation. Material, Installation, Test and commissioning of cathodic protection systems for Pipelines, Storage Tanks and Well Casings buried structures.
Survey of Pipe lines (DCVG, C-Scan, PCM, CIS, etc). Carrying out structure and soil surveys, Pearson Survey, Holiday Detection, Soil Resistivity survey, Interference survey. Current Drain Test survey and attaining / resolving
of TR and CP System failure jobs.
Preparing and submission of reports.
Sales and Purchase of CP and other Materials.

PROJECTS SUPERVISED


1.CP Audit.

Following CP System of Pakistan stat Oil installed in Mehmood kot.

a)32 Km 10” dia pipe line from LALPIR to KAPCO
b)5.5 KM 16” dia pipe line from PARCO to JIMCO
c)2.5 Km 12” dia pipe line from LALPIR to AES
d)4 Km 8” dia pipe line from PARCO to LALPIR


2.Inspection, Rectification.

Cathodic Protection system failure for jet fuel hydrant and Piping at new Lahore International Airport


3.CP Audit.

1.5 Km 12” dia pipe line from PARCO to PSO (MACHIKE)


4.CP Audit.

Following CP Systems of SNGPL (Sui Northern Gas Pipelines)
a)25.44 Km 18” and 30” dia pipe lines installed in UCH Shareef.
b)22.5 Km 24” dia pipe line in Multan.
c)25.18 Km 18” 24” dia pipe line in Shorkot.
d)19.47 Km 16” x2 pipe lines in Shehopura.
e)8 Km 6” dia Distribution line in Islamabad.


5.ECDA

External Corrosion Direct Assessment for following SNGPL pipe line which includes D.C.V.G, C.I.P.S additionally P.C.M
a)25.44 Km 18” and 30” dia pipe lines installed in UCH Shareef.
b)22.5 Km 24” dia pipe line in Multan.
c)25.18 Km 18” 24” dia pipe line in Shorkot.
d)19.47 Km 16” x2 pipe lines in Shehopura.
e)8 Km 6” dia Distribution line in Islamabad.


6.D.C.V.G

Rectification of CP System in PSO Mehood kot For following lines with DCVG Survey.
a)32 Km 10” dia pipe line from LALPIR to KAPCO
b)5.5 KM 16” dia pipe line from PARCO to JIMCO
c)2.5 Km 12” dia pipe line from LALPIR to AES
d)4 Km 8” dia pipe line from PARCO to LALPIR


7.Pre design Survey.

E, Log I & soil resistivity test for design of CP System
for 24 Well casing at Qadirpur Gas field OGDCL (Oil and Gas Development Company limited).


8.Pre design Survey.

E, Log I & soil resistivity test for design of CP system for
7 wells casing at ZAMZAMA gas field of BHP.


9.Pre design Survey.

Pre design survey of 6” dia 28 km long, condensate pipeline
from BHP ZAMZAMA to PARCO (Bobak)


10.CP system

Ground bed installation in PSO Lalpir, Furnace Oil Depot, Mahmod kot for 32km 10” Dia KAPCO pipeline.


11.CP system

Installation and commissioning of Solar power generation
based CP System of 05 numbers well casings at Sawan Gas
Field for OMV Pakistan.


12.Pre design Survey.

Current drain test and soil resistivity for 42km pipe line
from OGDCL BOBI Oil field to SSGC Tie in point Tando adam


13.DCVG Survey.

Design and supervise DCVG survey for 47Km pipelines network
for OMV in Sawan Gas field.


14.CP System.

Installation and commissioning of secrifitail anode based CP system for 6” Dia 28 km long condensate pipeline from BHP ZAMZAMA to PARCO Bobak station.


15.CP System.

Installation of TEG (thermo electric generator) based CP
system for well casings of X2,QP-12,QP-06 and QP-14 of
OGDCL Qadirpur gas field Ghotki.


16.CP System.

Installation of TEG (thermo electric generator) based CP system for well casings of QP-01,QP-28 and QP-15 of OGDCL Qadirpur gas field Ghotki.


17.CP System.

Installation of TEG (thermo electric generator)based CP system for well casings of QP-10,QP-13 and QP-20 of OGDCL Qadirpur gas field Ghotki.


18.CP System.

Installation of TEG (thermo electric generator) based CP system for well casings of QP-11,QP-08 and QP-07 of OGDCL Qadirpur gas field Ghotki.


19.CP System.

Installation of TEG (thermo electric generator) based CP system for well casings of QP-21,QP-25 QP-23 and QP-27 of OGDCL Qadirpur gas field Ghotki.


20.CP System.

Installation of TEG (thermo electric generator) based CP system for well casings of QP-22,QP-26 and QP-24 of OGDCL Qadirpur gas field Ghotki.


21.CP System.

Installation of TEG (thermo electric generator) based CP system for well casings of QP-16 and QP-19 of OGDCL Qadirpur gas field Ghotki.


22.CP System.

Anodeflex installation for PSO JIMCO terminal PARCO to JIMCO pipeline mehmood kot


23.CP System.

Test and commissioning of Solar powered CP system for well #18 PPL Adhi Gas field Doltala.


24.Pre design Survey.

Current drain test and soil resistivity of 7 wells, for designing of TEG biased CP system for MGCL (Mari Gas Company Limited) Dharki.


25.CP System.

Test and commissioning of Tank bottom CP system of BHP installed in PARCO Bubak Pumping station.

::May 5, 2008::May 27, 2008::2454614::216971899::0::2::0 2019::mohamad ashour::p.o.box 3510::ajman , uae::ca::3510::+971505677767::moro2277@hotmail.com::Intern&&Engineering&&Research&&Inspection&&Field Work::http://::technical support marine coating ::technical support marine coating::MOHAMAD ZEIN. ASHOUR
T E C H N I C A L S U P P O R T
MARINE & PROTECTIVE COATINGS
Mobile : +971 50 5677767
HOME: +971 6 7423085
P.O.Box 3510 - AJMAN
UNITED ARAB EMARATES
E-MAIL: moro2277@hotmail.com
: mashour@aucegypt.edu
OBJECTIVE
I am seeking a job in the field of Naval Architecture & Marine COATINGS , where my educational background and interpersonal skills will be used and developed besides acquiring practical experience.
QUALIFICATIONS
May 2004
„X B.Sc. in Naval Architecture & Marine Engineering , Marine Engineering
„X Project Level : EXCELLENT
„X Oct 2004 to Nov 2005
„X One year of A Sea service on the Egyptian NAVY ,
COATING SPECIALIST
„X jan 2006 TILL may 2007
„X Jotun coating EGYPT as a Marine Coating technical support
SKILLS
Technical skills:
„X STARTING THE CAREER OF COATINGS IN 2004
„X Knowledge and experience in the marine industry
„X Familiar with current technology and industry regulations , ISO REGULATIONS ISO 8501,ISO 2648
„X Analytical, problem solving, time management, project management and decision making skills
„X Demonstrates teamwork, interpersonal and communications skills
„X Proficient in PAINT QUANTITY ESTIMATION applications
„X Ability to respond positively to customers in an effective manner
„X Education and training as a Naval Architect
„X Selection, application, inspection and testing of coatings for onshore, offshore and subsea structures / equipment associated with oil and gas production / processing facilities.
- Familiarity with the design, specification, installation, commissioning, testing and monitoring/ surveying of:
Onshore impressed current CP systems.
Offshore sacrificial CP systems.
- Corrosion modelling and materials selection for oil and gas production/ processing facilities. Extensive knowledge and experience of sour service is essential.
- Working knowledge of various international standards including:
DNV-RP-B401 Cathodic protection design.
DNV-RP-F103 Cathodic protection of submarine pipelines by galvanic anodes.
ISO 15589 Cathodic protection of pipeline transportation systems.
ISO 15156 Materials for use in H2S-containing Environments in oil and gas production.
ISO 8501 Visual assessment of surface cleanliness.
ISO 8502 Tests for the assessment of surface cleanliness.
ISO 8503 Surface roughness characteristics of blast-cleaned steel substrates.
ISO 8504 Surface preparation methods.
ISO 12944 Corrosion protection of steel structures by protective paint systems
„X Language Skills:
„X Native language Arabic.
„X Very good command of both written and spoken English.
„X writing reports & memos

Computer Skills:
„X Excellent Knowledge of the following :
„X Microsoft Windows xp , Apple mac. Operating Systems
„X Microsoft Word , Excel and Microsoft Power Point ,
„X Internet Surfing ,
„X Adope PHOTO SHOP
INTERESTS
Reading , Computers , Swimming , Telecommunications , new computer programs navigation , billiards , chess , cooking and traveling
PERSONAL INFORMATION
Date Of Birth : 29/04/1981 .
Nationality : Egyptian .
Marital Status : Married .
EGYPT ENGINEERS SYNDICATE Membership
Valid Egyptian driving license
Passport no. : 1272230
Visa type : visit
References : Mr. KAMAL HUSSEN +971506353010

I would Like To Be Part Of A Dynamic Team environment, To Further Develop My Capacity With An Organisation Availing Me Of The Opportunity To Utilise My Accumulated Knowledge And Skills Within The Engineering Field Where I Can Progress Through Hard Efforts And Be Recognised As An Integral Part Of The Management Team


::Oct 22, 2007::Nov 22, 2007::2454427::saly2277::1::0::0 2018::Robert Adams::2603 Link Rd.::Houston::TX::77008::225-335-5006::radams@corrpro.com::Sales&&Engineering&&Certified or Licensed&&Field Work::::Position Desired: ::Corrosion Technician::James Robert Adams III
Houston, TX

OVERVIEW:

Over (5) years of experience in the oil and gas field of corrosion and cathodic protection business. Certified NACE CP1. Experience and Skills have touched many facets of the Oil Field production business(i.e. operations, sales, service, and technical). Experience in water production and treatment facilities cathodic protection systems.


Highly motivated and responsible employee recognized for:
• Commitment and Reliability
• Hardworking
• Strong communication skills
• Client relations
• Creative problem solving skills
• Computer skills Power Point, Excel, Word, etc.

Education

Louisiana State University Baton Rouge, LA
Bachelor in General Studies concentration in
Geology, Geography, and Sociology

North DeSoto High School Stonewall, LA
High School Diploma

Work Experience

99’ - July 06’ Adams Superior Services, L.L.C. Keatchie, La
Corrosion Consultant / Outside Sales
• Inventory Maintenance
• Insured quality of work performed
• Maintained relations in field work
• Installed power controlled rectifiersfor pipeline systems
• Installed anode beds and Cad-weld copper wire to pipelines
• Installed oil and condensate tank anodes
• Installed test stations at pipeline crossings and various other test points

July 06’ – October 06’ Whitco Pump and Equipment Lafayette, La
Inside Sales Rep.
• Purchasing inventory
• Composing sales orders / purchase orders
• Shipping and Receiving

November 06’- Present Corrpro Companies Houston, TX
Corrosion Technician II
• Maintain city of Houston rectifier systems on
water and sewer systems
• Survey City of Houston Water and Sewer
systems
• Installed power controlled rectifier systems
for production/holding tanks. Including: MMO,
zinc, and magnesium ribbon anodes
• Soil resistivity surveys
• Survey for casing shorts and Insulated flange
shorts
::Oct 16, 2007::Jan 17, 2008::2454483::jralsu::1::0::0 2017::Blaine::792 country place::longview::tx::75605::903-663-2367::c.blaine.smith@gmail.com::Management&&Office&&Computer&&Intern&&Manufacturing&&Engineering&&Certified or Licensed&&Inspection&&Field Work&&Miscellaneous::http://::NACE CP1 Corrosion Tech. ::Expereinced Corrosion technician seeking employment:: C. Blaine Smith
792 Country Place
Longview, TX 75605
C.Blaine.Smith@gmail.com
979-229-1384
903-663-2367


OBJECTIVE

Seeking a position which includes responsibilities related to corrosion prevention duties. Including cathodic protection, internal corrosion control, atmospheric corrosion control, protective coating and linings, and materials selection and design/project support.

EDUCATION

Associate of Applied Science in Corrosion Technology, May 2005
Kilgore College, Department of Corrosion Technology, Kilgore, Texas

Bachelor of Business Administration, August 2002
Texas A&M University, Lowry Mays School of Business, College Station, Texas

EXPERIENCE

Corrpro Companies, Santa Fe Springs, CA
Corrosion Technician ($35,360/yr)
(Jan. 06 to present)


(1/06-7/06)
Contract position for BP included P/S annual surveys, rectifier bi-monthly surveys,
RMU installation, impressed anode installation, bonding and isolating issues, installing/ replacing test stations, any other issues relating to cathodic protection.

(7/06-present)
Contract position for Plains A.A. included P/S annual surveys, on/off surveys, rectifier bi-monthly surveys, groundbed installation, rectifier installation, stray current troubleshooting, Bass-Trigon Pipeline Compliance software, complying with CFR and DOT requirements.

Matcor, Houston, Tx
Corrosion Technician ($27,040/yr)
(July 05 to Dec. 05)

Conducted surveys of 26" and 30" natural gas pipelines for British Petroleum in Ulysses, Kansas. Surveys included Direct Assessment Methods. Rectifier maintenance and troubleshooting, CIS survey, GPS Trimble survey, DCVG survey, p/s readings.


SKILLS

NACE certified CP Level 1

3.3 GPA in corrosion related courses

Experienced use with PCM, CIS, DCVG, Trimble, BAC Pin Brazer

4 years corrosion related experience
(including 2 year technical degree experience)


Knowledgeable software applications (Word, Excel, Bass Trigon compliance, American Innovations RMU).

REFERENCES

Mike Schilling, Corrpro (562)944-1636

Josh Young, Shell (337)380-5559

Kelly Green, Shell (903)241-3758


::Oct 8, 2007::Jan 9, 2008::2454475::1221::0::0::0 2016::Clayton Adkins::1325 FM 253::Buna::TX::77612::479-430-8426::adkins_ca@yahoo.com::Certified or Licensed&&Inspection&&Field Work::::Position Desired: ::Kilgore Grad seeking Corr. Tech. Career::P.O. Box 143
Bryant, AR 70869
Cell: (479) 430-8426
Home: (409) 994-4505


Objective:

To obtain a career in the corrosion field with a progressive and growing company that can develop my skills to become a qualified Corrosion technician.


Education:

August 2004-August 2007
Kilgore College Kilgore, TX
*AAS Degree in Corrosion Technology

1998-2000
Lamar University
Beaumont, TX

1996
Sam Houston State University
Huntsville, TX

1996
Buna High School, Diploma
Buna, TX


Employment:

May 2006-Present
CenterPoint Energy - Pipeline Integrity
Direct Assessment Tech.
Little Rock, AR

December 2005-May 2006 / August 1998-June 2001
Brazos Cattle Company, Waitstaff
Beaumont, TX

May 2005-August 2005
CenterPoint Energy, Pipeline Survey Crew-Summer Intern
Shreveport, LA

August 2004-May 2005 / August 2005-November 2005
Wal-Mart Stores, Inc., Cashier
Kilgore, TX

July 2004-August 2004
Zaval-Tex Pipeline Construction Co., Repair Crew
Beaumont, TX

June 2004-July 2004
Triple S Industries, Inc., Welder’s Helper, Firewatch
Lumberton, TX

November 2001-January 2003 / January 1997-August 1998
Keeler Enterprises, Inc., Tire tech., equipment service, delivery
Buna, TX


Skills/Awards:

NACE Certified: Cathodic Protection Tester (CP1), Cert. No. 9265

Certificate: NACE Gas Capitol Rectifier School

1 year+ experience performing pipeline surveys for corrosion – Close Interval Surveys and DCVG Surveys using MCMiller Direct Assessment Meter, Pipeline Current Mapper Surveys using Radio Detection pipeline locators, downloading surveys into MCMiller ProActive software for analysis.

3 Months experience as an intern performing Close Interval Surveys and DCVG surveys while working with rectifiers, pipe locators, temporary groundbeds, soil resistivity instruments, and pneumatic drills.

3 Months experience working part-time as a data tech. analyzing field data from ECDA surveys, writing pre-assessments, and proof-reading and revising ECDA Final Reports, Word and Excel.

Dean’s List – Kilgore College - Fall 2004,Fall 2005
Employee of the Month – Cattle Company - Feb. 1999,April 2001,March 2006
Secret Shopper Perfect Score Award – Cattle Company-February 2006
NACE Corrosion Scholarship - Fall 2004,Spring 2005
Great Job: Wal-Mart Excellence Award - November 2004,September 2004
Cashier of the Week – Wal-Mart - November 2004


References:

Chris Adkins, Maintenance Planner
Shell Pipeline
Port Arthur, TX (225) 938-3278

Jerry Gates, District Welder
Kinder Morgan, Inc.
Beaumont, TX (409) 246-3037

Victor D. Moore, Cathodic Protection Tech
Citizens Gas & Coke Utility
Indianapolis, IN (317) 695-6360

Lisa Blake, General Manager
Brazos Cattle Company
Beaumont, TX (409) 895-0099

Frank Abalos, Maintenance Mgr.
Zaval-Tex Pipeline Const. Co.
Beaumont, TX (409) 794-2516

Mike Keeler, Owner
Keeler Enterprises, Inc.
Buna, TX (409) 994-3501

Bennie J. Brown, English Instructor
Kilgore College
Kilgore, TX (903) 983-8221

Tony Fuselier, Tennis Instructor
Kelly High School, Brentwood C.C.
Beaumont, TX (409) 466-4695::Sept 25, 2007::Dec 27, 2007::2454462::cassius::0::0::0 2015::Prentice Wink::569 Browning Dr::Kilgore::TX::75662::9039872131::pwink17@yahoo.com::Engineering::http://::corrosion tech ::corrosion tech::

Prentice B Wink

569 Browning Dr75662
(903) 984-1720home
(903) 987-2131 cell
Pwink17@yahoo.com

EDUCATION
Kilgore College 2004-2008
Corrosion certificate
Associate of arts

Trinity School of Texas 2003
High School Diploma

ACTIVITIES
• Kilgore College Football
• Boy Scouts Troop 259
• ACTS active communicating trinity students
• Varsity Baseball, Basketball, Football, Soccer, Track 2004-2006
1999-2002
2002-2003
AWARDS
• Eagle Scout
• Nace Cp level 1 license #14916 2002
2006
RELATED EXPERIENCE
MEAS Products
Did CSI work for many different companies in the southern United States.
Helped install many different Types of anodes in deep well ground beds May2007-August2007
ACQUIRED SKILLS
• Microsoft Word, Excel, PowerPoint, spread sheets, and general computer processes.
Other work experience
Circuit City
Position: May 2004 –
May 2007
Warehouse associate, Home delivery driver
Duties
Unload truck put product shelf, Carry out purchased products
Basic TV hook up. Complexes surround sound system hook ups. Programming
Remotes, teaching clients how to use the equipment they purchased.

Winks Auto Detailing May 2001
Owner Current
Search out clients and place bids to detail cars and trucks.
Duties
Wash, wax, dry, clean out the interior, and make sure that the clients are
happy with the job done.
References upon request
::Sept 18, 2007::Oct 19, 2007::2454393::kicker17::0::0::0 2014::charles allen::1701 121ST ST SE ::Everett::WA::98208::425-225-5185::alaina.allen@gmail.com::Certified or Licensed&&Field Work::http://::Position Desired: Testing or Consturction ::Motivated worker looking for a good company ::Charles Allen
1701 121 St. SE D103
Everett, WA 98208 Phone 425225-5185
E-mail alaina.allen@gmail.com


Education

Aug 04-May 05
Kilgore Community College Kilgore, TX
Corrosion Technology Certificate

Jan 02-Dec 02
Kilgore Community College Kilgore, TX
HVAC (Heating, Venting, Air Conditioning) License
EPA Certified

Gladewater High School
Graduated May 99

Work experience

Feb 06-Present Corrpro Company, Inc. Seattle, WA
Corrosion Technician
Surveying Puget Sound Energy distribution mains and services. Data processing all readings of impressed current, galvanic, and isolated systems using Microsoft Excel and Word. Communicate directly to PSE technicians. Drove company vehicle accident/ticket free.

Sept 05-Feb 06 Total Corrosion Houston, TX
Corrosion Technician
Completed annual surveys. Data processed using Microsoft Excel and Word. Supervised the drilling of holes for anode beds and installed anode beds. Supervised tie ends of rectifiers and anode beds. Trouble shot and installed oil and universal rectifiers. Completed OQ/safety training to gain access to oil refineries, pipeline right-of-ways, and international trade zones. Drove over 10,000 miles in company vehicle accident/ticket free.

May 05-Sept 05 Center Point Energy Shreveport, LA
Corrosion Technician
Aided in CIS, ACVG, and DCVG surveys with MC Miller equipment. Located pipelines by using both transmitter/receiver. Assisted in Pipeline Current Mapper. Trouble shot rectifiers. Installed interrupters. Drove company vehicles over 25,000 miles accident/ticket free.

::Sept 7, 2007::Dec 9, 2007::2454444::033080::0::0::0 2013::seema::51/19 patel nagar::sonipat india::hr::131001::09971176322::s_chowdhary1@rediffmail.com::Management&&Engineering&&Research::http://::Position Desired: ::Ph.D (Corrosion)::

CURRICULUM VITAE

Dr. Seema Chowdhary
Email: s_chowdhary1@rediffmail.com
18 DDA Flats New Ranjeet Nagar
New Delhi - 110008
9971176322 , 9312782411

Objective: To work for challenging and result oriented research/job where I can explore my technical as well as managerial skill with full potential.


References: Shishir Bhatnagar, Manager in S. Chand and Company Ltd.
Professor K. C. Singh, M.D.U Rohtak

Qualification: M. Sc, Ph. D( A study of temporary corrosion preventive for mild steel)

Discipline: Chemistry

Academic Profile:

1 PhD (A Study of Temporary Corrosion Preventives for Mild Steel)
(Degree awarded on April 2007 from M.DU, Rohtak University, Around 4.6 years Research Experience)
2 M.Sc .(Chemistry) from C.S.J.M Kanpur University, Kanpur, Uttar Pradesh
(63.5 %, Passed out in Year 1999)
3 B.Sc (Chemistry as one of the subject) from C.S.J.M Kanpur University, Kanpur, U.P
(63.1%, Passed out in Year 1997 )


Areas of Interest:

1 Corrosion Inhibitors and Rust Preventive Oil
2 Electrochemistry

Computer Proficiency:
• MS-WINDOWS, MS-WORD, PAGE MAKER, INTERNET, DOS.

Techniques Known: a) Weight Loss Technique.
b) Electrochemical polarization (Both Galvanostatic and Potentiostatic).
c) Salt Spray Technique.
d) Metallurgical Microscope/ Biological Microscope.
e) Impedance Techniques.


Experience:-
Working in S.Chand & company Ltd as a Subject Editor posted at New Delhi( From July 2006 to till date.

Job Profile:- Handling manuscript received from author and finally passing the manuscript for further action. Editing, Corrections, Revised edition, also handling refresher courses for students, handling books according to U.G.C, ICSE and CBSE Syllabus according to the concerned university/Board, Writing about the book and about the author, Front page designing

Projects Completed

1. Y. R. Sharma- Elementary Organic Spectroscopy.
2. Bahl & Tuli – Essentials of Physical Chemistry.
3. ISC Chemistry – for Class XII by R. D Madan.
4. Class 1st to 10th – English Grammar-Making it according to Nepal Board- P. C. Wren et al.
5.Handling of feedback received from the students of the concerned subjects
6. Conceptual Chemistry – S. K. Jain
7. ISC Chemistry (Guide) - R. L Madan & G.D Tuli.
8. English Grammar - 1 to 8 class - P.C Wren (INDIAN EDITION)
9. Bioinformatics - Dr. B. Annadurai (Project Report)
10. AEVS Series book - 1 to 5 classes- Mukul Sehgal.
11. Organic Chemistry Guide - R. C. Madan
12. Personality Development.
13. Awareness Science Book 0 to 5: Abha Sehgal
14. H.S Question Bank Chemistry: Class XII
15. Logistics Management: Dr. S.K.Bhatacharya
16. Hindi-English-Hindi Dictionary- Dwarka Prasad

Projects in Hand:

1. Dictionary of Biochemistry: Jain and Jain
2. Inquisitive Science Series: Kiran Ashok Kumar
3. G.K. for Class 8- S.K.Gupta
4. Cramster. Com- Project
5. Advanced Organic Chemistry: Bahl & Bahl

Personal Details:-
Personal Details
• Date of Birth: 04-May-1977
• Languages Known: Hindi and English
• Hobbies: keen interest in sports like Chess, Reading magazines.
• Over two years teaching experience.
• Approximately 4.6 year research exp.
• Published two research papers and one communicated for Conference.

Extra Curricular Activities:-

• Got 2nd prize in 4 100m relay races.
• Got 3rd prize in 4  200m relay races.
• Having NCC ‘C’- Certificate holder.
• Attended “All India Vayu Sainik Camp” at Karnataka, India.
• Attended Seminar on ‘Nuclear Weapons’ at Kanpur.

Research paper published:-

1) Corrosion characteristics of nitrogen containing steels.
R. S. Chaudhary, N. K. Handa, H. Kumar and S. Chowdhary
Bull. Electrochem. 18 (10), 461,2002

2) Inhibitors for controlling the corrosion of high nitrogen steels in hydrochloric
acid solution.
R.S. Chaudhary, N.K. Handa, H.Kumar and S. Chowdhary
J. Electrochem. Soc.

3) Oil based organic Coatings as Corrosion Inhibitors.


I hereby declare that all the above-mentioned information is true to the best of my knowledge.

Date: Seema Chowdhary
Place: New Delhi

::Sept 3, 2007::Dec 5, 2007::2454440::333333::1::0::0 2012::THENASSERIL SEBASTIAN JOY::THENASSERIL HOUSE,KURAVILANGAD P.O,KOTTAYAM,KERALA,INDIA, PIN 686633::KURAVILANGAD KERALA::I::686633::0091 4822 230695::joythenasseril@yahoo.com::Field Work::http://::CATHODIC PROTECTION TECHNICIAN ::THENASSERIL SEBASTIAN JOY:: THENASSERIL SEBASTIAN JOY
E - Mail: joythenasseril@yahoo.com
Mob. No: 0097150 3840676

Post applied for: Senior CP Technician

OBJECTIVE:

Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it¡¦s best, so as to bring out the best in me and thus to attain the highest degree of progress and satisfaction in CATHODIC PROTECTION works of my company.


DETAILS OF PROFESSIONAL EXPERIENCE:

Designation : Senior CP Technician
Period : April 2005 to TILL DATE

JOB RESPONSIBILITIES

„« Installation, testing and commissioning of MMO ANODE MESH, DISCRETE ANODES(CONCRETE CP)
„« DCVG survey, CIPS survey, Soil resistivity for cross country pipe lines
„« Installation, testing and commissioning of impressed current cathodic protection system with MMO tubular anodes (Deep well ) and installation testing and commissioning of solar rectifiers for cross country pipe lines
„« Installation, Testing and Commissioning of MMO ribbon anodes for Tank bottom protection

PROJECT A : Concrete Rehabilitation of Jetty at Marine Oil Terminal .ABUDHABI
REFINERY DIVISION. TAKREER UMM-AL-NAR
CONSULTANT: TEBODIN and CORRPRO

PROJECT B : Cross country pipe line survey ADCO.

PROJECT C : Cross country pipe line survey GASCO.

PROJECT D : Cross country pipe line survey MARGAM.

PROJECT E : Installation, Testing and Commissioning of CP system for cross country pipe
Line ADCO
PROJECT F : Tank Farm ADCO

Designation : Cathodic Protection Senior Technician
Period : Sep 2002 to Oct 2004

ABACORP a company in Saudi Arabia dedicated to CORROSION CONTROL and specializes in Cathodic Protection to combat corrosion of underground / under water pipeline, concrete structure & buried steel structures/tank bottoms, on turnkey basis and provide a total service from concept to commissioning, including maintenance services for Corrosion Protection, Monitoring & Control Systems.

JOB RESPONSIBILITIES

„« Involved in all types of cathodic protection installation activities (Oil & Gas P/ls, AGST Tank Bottom, concrete structure) viz Site Survey, Soil Resistivity, Inspection (Data Collection Generation) Installation, Testing, Commissioning and performance monitoring.

PROJECT A : United Olefins Petrochemical Complex Project, JUBAIL ¡VSaudi Arabia
(UNDER EXECUTION)

CONSULTANT: M/s FLUOR HOUSTON / ARABIA LTD.

„« Installation of MMO Ribbon Anodes, Conductor Bar, reference electrode
(Cu-CuSo4 Borin Stealth Type) Junction Boxes, TR Units, Spot welding, Thermit Welding for 20nos. Tank Bottom of various diameter 3.5M to 60M. For the following contractor¡¦s

„« M/s AGAP Arabia Ltd., K.S.A
„« M/s Arabian CBI Ltd. , K.S.A


PROJECTB : M/s Hadeed Iron and Steel Company, Jubail

„« Installation of High Silicon Anodes, Junction Boxes, Oil Cooled TR Units, Thermit welding, cable laying, Testing, commissioning & Monitoring for Fire Water Pipelines.

PROJECT C: M/s Gazhlan Power Plant Project

„« Installation, testing and commissioning of MMO ANODE [ MESH TYPE ] and RECTIFIERS FOR INTAKE AREA (CONCRETE CP)



Designation : Electrical Foreman
Period : September 2001 to March 2002



JOB RESPONSIBILITIES
Installation, Testing and commissioning of Impressed Current CP System, 2nos. Air Cooled TR Units, 23 nos. Test Stations and 80 nos. High Silicon Anodes.

PROJECT A : M/s Petrochemical Industries Company, (PIC) Kuwait

Designation : Contractor
Period : Dec 1996 to Jan 2001

Installation, Testing and Commissioning of ICCP anodes and sacrificial type cathodic protection system worked as a contractor

PROJECT A : RASHTRIYA CHEMICALS AND FERTILIZERS COMPANY LTD. (RCF)
ALIBAUG, INDIA
PROJECT B : GUJARATH NARMADA VALLEY FERTILIZER COMPANY (GNVFC)

PROJECT C : GAS AUTHORITY OF INDIA LTD (GAIL)

PROJECT D : OIL AND NATURAL GAS COMMISION (ONGC) OFF SHORE PILE BENTS.


Designation : Electrician
Period : 1995 To 1996

JOB RESPONSIBILITIES
„« Involved in all types of cathodic protection project activities viz site survey and
Installation Testing & Commissioning and performance monitoring.

PROJECT A : M/s Doha West Power Project, Kuwait

Designation : Cathodic Protection Supervisor
Period : 1989 to 1994

JOB RESPONSIBILITIES AND PROJECTS

PROJECT A : M/s Mumbai Port Trust, India

„« Involved in site survey, Installation. Testing & Commissioning of Impressed Current Cathodic Protection System for Sub-Marine Pipelines.

PROJECT B : M/s Indian Petrochemical Ltd., Baroda ¡V India

„« Monitoring and Maintenance of CP System entire Plant.

PROJECT C : M/s Gujarat Narmada Valley Fertilizer Company, Bharuch ¡V India

„« Two years Monitoring and Maintenance of CP System Sacrificial and Impressed Current, 34nos. Air Cooled TR Units, 820 nos. Test Stations for whole plant.

Designation : Cathodic Protection Technician
Period : 1984 to 1989

JOB RESPONSIBILITIES AND PROJECTS

PROJECT A : M/s Indian Oil Corporation Ltd., India

* Soil Resistivity, CPL and Pearson Survey for 14¡¨dia & 140KM Twin Oil Pipeline (KNK-KAPL project) Testing of TR Unit Efficiency.

PROJECT B : M/s Indian Oil Corporation Ltd., India

* Soil Resistivity, CPL and Pearson Survey for 12¡¨dia. & 120KM Oil Pipeline (HMR project).

PROJECT C : M/s Amul Corporation Anand Ltd., India

* 4¡¨ Dia. 60KM gas pipeline, Installation, Testing and commissioning of Impressed Current CP System.

PROJECT D : M/s Assam Gas Company Ltd., India
* 72KM gas pipeline, Installation, Testing and commissioning of Impressed Current CP System.

PERSONAL DETAILS

Name : JOY THENASSERIL SEBASTIAN
Nationality : Indian
Age & Date of Birth : 43,18-09-1964
Marital Status : Married
Passport No. : F-1073422
Date of Issue : 29-11-04
Date of Expiry : 28-11-14
Languages Known : English, Hindi and Malayalam
Permanent Address : Thenasseril House
Kuravilangad P.O.,
Kottayam (DT)
Kerala, India ¡V 686 633
Ph:0091- 482-2230695
00971-50 - 3840676
Educational Qualification

Academic : S.S.L.C., Pre-Degree (10+2)
Technical : I.T.C., Electrical (Two year course)


(JOY THENASSERI
::Sept 1, 2007::Dec 3, 2007::2454438::sssdri::0::0::0 2010::Joji Philip::jovilla::kerala, india::00::000::00914734282218::joji_181973@yahoo.com::Sales&&Management&&Office&&Computer&&Manufacturing&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://::Position Desired: ::CP Design Engineer, Technical Estimator, CAD Eng::Objective

Looking forward for a suitable opportunity to utilize and explore my educational and technical experience in the field of Cathodic Protection, CAD and System Administration with a professional organization and to reach a challenging professional environment, with significant growth opportunity.

Profile

A Mechanical Engineer with more than eight years Gulf experience in CAD and Cathodic Protection projects.

Experience

Sep. 1998 – till date Corrpro Companies M.E. LLC, UAE.

Corrpro Companies Middle East (CCME) based at Sharjah, is the headquarters for the companies operations in the Middle East, Africa and Indian subcontinent. CCME is in the field of cathodic protection, corrosion control, internal corrosion monitoring, remote monitoring, specialised corrosion surveys consultancy services, manufacturing, installation etc...

My duties and responsibilities includes but not limited to:

Technical Estimation/Tendering/Designing: Responsibilities included the tendering, engineering (design and execution) and surveys for Cathodic Protection related projects. Briefed as under:

Tendering: Preparation of proposals with design philosophy, estimation of project cost, specifications of equipment, sourcing, pricing bid follow up and negotiating contracts etc.

Engineering: Designing of complete cathodic protection system for various industrial and offshore projects, in accordance with client’s specification and international standards. Carry out site survey, design approval from clients, planning and execution of project. Procurement of the materials from different part of the world as per the approved design and further supervise the assembling of the same as per the specifications.

Attending Meetings at Customer’s Office: Meeting Clients for discussion during tendering and exsiccation of projects.

System Administration: In charge for around 30 PCs, two servers, and various networking peripherals of local area network. Installation, maintenance and troubleshooting of various Microsoft products such as Windows 98,Windows 2000,Windows XP, Office XP, Windows NT, Windows Server 2003. Handle break down calls on operating system, PC hardware, printers and networks. Configure server, work stations, LAN, email client, mail server, modems and printers. PC up gradation/assembly and OS installation etc.

Drafting of Engineering Drawings: Provide CAD drafting for different projects, prepare detailed technical drawings, incorporate client’s comments independently, site visit to prepare as built drawings, plotting from AutoCAD in different sizes, interact with client’s technical representative during their visit etc..
S
oftware used for different projects:
• AutoCAD 12 to 2007 and currently using 2008
• MS Office: Word, Excel and Power Point.
Preparing documents, spreadsheets and presentations.
• Adobe Acrobat:
Converting to pdf formats, indexing and linking files.

Education: Diploma in Mechanical Engineering from Department of Technical Education, India. Graduated in 1995.
• Certificate of Proficiency in Auto CAD.
• Certificate of Proficiency in Auto Lisp.

Professional Training and Affiliations
NACE Training – CP Level I & II
NACE Accredited Cathodic Protection (CP) Technician #8756
Member, National Association of Corrosion Engineer (NACE)

Personal Details:
Date of Birth : 01-08-1973
Sex & Marital Status : Male, Married
Languages Known : English, Malayalam and Hindi.
Visa Status : Employment
::Aug 25, 2007::Nov 26, 2007::2454431::jo482218::0::0::0 2009::Don Brandt::405 Phillips Dr.::Gladewater::tx::75647::9035767137::jake3364@suddenlink.net::Sales&&Management&&Office&&Computer&&Intern&&Manufacturing&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://:: ::Experienced Corrosion Tech::Don Brandt
405 Phillips Dr.
Gladewater, Tx 75647
Tel: 903-576-7137
Email: Jake3364@suddenlink.net

Objective: To progress my understanding and ability in corrosion with hands on activities, as well as further my education and experience with NACE and other related associations.

Employment:
Jan04-May05 Lowes Home Improvement Longview, TX
Customer Service Associate
Performed customer service
Conducted merchandise inventory control
Present public training classes on various subjects
Lowes Home Improvement Safety Committee Board

May05-June05 CenterPoint Energy ECDA Group Shreveport, LA
Corrosion Tech 1 (Intern)
Performed CIS, DCVG, ACVG, PCM
Conducted line locations
Maintained equipment

June05-Aug05 MESA Corrosion Control Inc. Tallahassee, FL
Corrosion Tech 1 (Intern)
Installed Anodes in numerous manhole locations
Performed surveys to ensure system operation
Maintained data records

Aug05-May05 Sherwin Williams (Industrial) Longview, TX
Customer Service Associate
Performed customer service
Blended coatings for are industrial companies
Present public training classes

May06-July07 Corrpro Companies Inc. Houston, TX
Corrosion Engineer 1
Majority of time spent in refineries conducting surveys
Conducted numerous anode installations below above grade storage tanks and below grade storage tanks
Participated in the City of Houston water works project

Education:
Aug00-May04 Gladewater High School Gladewater, TX
Diploma 04
National Honors Society 02-04
Spanish Honors Society 02-04
Texas Globe Scholar 03-04
Regional Qualifier PowerLifting 02,03,04
3rd in State PowerLifting 03
Male PowerLifter of the Year 03,04

June04-May06 Kilgore College Kilgore, TX
Associates in Corrosion Technology
As well as core curriculum, studies courses such as: DC Circuits, Cathodic Protection, Metallurgy, Chemistry 1&2,ITSC (computer programs such as MS Word, Excel, Explorer, and Powerpoint), Internal Corrosion, and Coatings
Graduated with 3.15 GPA
72 College hours in two years

Summary of Qualifications:
May06-July07 Corrpro Companies Inc. Houston, TX
Corrosion Engineer 1
In addition to the above mentioned, all of the following were performed:
Pipe location
Anode installation
Continuity testing on various systems, included concrete pipe
CIS
DCVG
ACVG
PCM
Process unit surveys
Plant-wide refinery surveys
Plant-wide system mapping
Impressed and Galvanic system design
Coating application
10 hour OSHA safety training course
Smith driving system seminar completion
Universal Rectifier training seminar completion
Upgraded and improved a device to aid in the installation of spiral anode for above ground storage tanks, aka "The Anode Slinger"

Professional Memberships:
NACE International Cathodic Protection Tester Cert No. 9266

References:

Rafael E. Rodriguez, MSE
Project Manager
Corrpro Companies, Inc.
7000B Hollister Rd.
Houston, Texas 77040
Tel: 713-460-6000
Fax: 713-460-6060

Timothy G. Harvey
NACE Certified Corrosion Technician
Corrpro Companies, Inc.
7000B Hollister Rd.
Houston, Texas 77040
Tel: 713-460-6000
Fax: 713-460-6060

John Tucker
NACE Certified Corrosion Technician II
CEM Resources Inc.
27493 Hanna Road, Suite #9
Conroe, TX 77385
Tel: 832-381-4633
Fax: 281-292-6807

Ted Saffer
CP Specialist
CORRPRO Companies, Inc. - Houston
713/460-6009 (Direct Line)
713/460-6060 (Fax)
713/419-3095 (Cell)
::Aug 21, 2007::Nov 22, 2007::2454427::310713::1::0::0 2008::Pravin::133,lilashahnagar, Gandhidham,kutch, india::gandhidham,::gu::370110::9825986030::pravin_mishra1@rediffmail.com::Engineering&&Certified or Licensed&&Inspection::http://::Position Desired: Inspector ::coating inspector::::Aug 21, 2007::Nov 22, 2007::2454427::9825986030::1::0::0 2007::Dilip Sankar::Amran Cathodic protection L.L.C::muscat::0::100::00968-92884410::dilipsiva@hotmail.com::Engineering&&Certified or Licensed::http://::Position Desired: ::Cathodic Protection Engineer:: DILIP SANKAR

Project Engineer (CP)
P.O Box 919,PC-113,
Muscat, Sultanate Of Oman

Amran Cathodic Protection Systems & Services L.L.C. Mobile: +968 92717057
mail: dilipsiva@hotmail.com

PROFESSIONAL SUMMARY


• Four years of industrial experience. Major experience includes design, installation and commissioning of ‘Cathodic Protection Systems’ with an additional role in providing sales & marketing Support. Earlier experience includes, working in a Metallurgical quality control department in Mil Controls Limited, India which produces pressure valves and pump accessories.
• B.Tech in ‘Mechanical Engineering’ from Mahatma Gandhi University and a member of ‘National Association of Corrosion Engineers (NACE).
• NACE Certified Corrosion Technologist

COMPUTER PROFICIENCY:


• AutoCAD 2000 and AutoCAD Rel-14.
• Working knowledge in MS Office-Word, Excel and PowerPoint.

CAREER ASPIRATIONS:


• To pursue a challenging career in the field of Mechanical Engineering, Corrosion Engineering and Project Management, where I can apply my knowledge and skills and sharpen the same.

EXPERIENCE


Project Engineer (Cathodic Protection)

Sept-2004 - Present
Amran Cathodic Protection Systems & Services L.L.C.
Muscat, Sultanate Of Oman.

Amran Cathodic Protection Systems & Services is an advanced applied technology ISO 9001-2000 certified company, that provides engineering services, products and complete cathodic protection project solutions to Oil and Gas Industry.

The services provided by CP Division include CP Design and Consultancy, Site investigations, Supply of complete range of CP materials and equipment, installations, supervision, testing, commissioning. Amran CPS also undertakes special surveys like DCVG, CIPS and Interference studies.

Job Profile:
• Responsible for Design, Drawing, Installation Supervision & Commissioning of Cathodic Protection Systems.
• Provide Sales & Marketing Support.
Skills Acquired:
• Design and Engineering for Cathodic Protection Systems.
• Work experience in the field of CP Survey, Installation, Testing & Commissioning
• Work experience in the field of Investigative assessment, Trouble shooting & Rehabilitation for CP systems for Pipeline, tanks & offshore structures.
• Commissioning of different types Transformer Rectifier for the working of ICCP System
• Commissioning of different types DC – DC Converter for the working of ICCP System, Muscat

(II) Assistant Engineer-(QA/QC)

March-2003 - Aug-2004
Mil Controls Limited, India.
Kerala, India.

Job Profile:

• Responsible for metallurgical quality control throughout the engineering and production of Pressure valves and pump accessories.
• Part of the team responsible for the accreditation of quality testing like Radiography Magnetic, Ultrasonic & Liquid penetrate test.

Major Projects completed in Amran Establishment:

1. Sohar Methanol Project

CP Engineer – Design, material supply, testing and commissioning of CP system for external bottom surfaces of 10 nos. of methanol and water tanks at Oman methanol company complex at Sohar for Proman, Oman.

2. Oman Steel Tanks for PDO

CP Engineer –Design, material supply, testing and commissioning of CP system for external bottom surfaces of 02 nos. of Crude Oil Tank at PDO Lekhwair & Rima in Oman.

3. Two nos. MTBE tanks for ORC, Muscat, Oman.

CP Engineer–Design, material supply, Installation Supervision , testing and commissioning of CP system for external bottom surfaces of 02 nos. of Isomarisation Tanks at Oman ORC company complex at Muscat.

4. Potable Water tanks at Dukhan, Qatar:

CP Engineer: Design, material supply, testing and commissioning of CP system for external bottom surfaces of 02 nos. of Crude oil tanks at QP refinery with Galfar & Al Misanad Company at Dukhan.

5. Crude Oil Tanks at GC’s at KOC Kuwait

CP Engineer – Design, material supply, testing and commissioning of CP system for external bottom surfaces of 2 nos. of crude oil tanks at GC-27 of Kuwait Oil Company for HIESCO.

6. Water supply to Bidbid, Fanja and small towns MHEW project

CP Engineer – Design, material supply, testing and commissioning of ICCP system for 60km of 44” and 40” water pipelines project with ERKO Al Matar and CES consultancy

7. IWWP – SOHAR Water Transmission Project.

CP Engineer – Design, material supply, testing and commissioning of ICCP system for 150km of 44” and 40” water pipelines project with Gammon India & Al Matar and Energoproject consultancy

8. PDO 48” LNG Export Capacity Increase

CP Engineer: Design, material supply, testing & commissioning of ICCP system for 260 km of 48” pipeline from Qarnalum to Sour pipeline under the engineering consultancy of Granon . The EPC contractor for the project is Punj Lloyd.

9. MAF Sohar Crude Oil Pipeline Project (MSCP)

CP Engineer: Design, material supply, testing & commissioning of ICCP system for 270 km of 24” pipeline from Mina-Al-Fahal to Sohar pipeline under the engineering consultancy of Mott Macdonald. The EPC contractor for the project is Saipem – CCC joint venture


10. Saih Nihayda GAS Plant (SNGP)

CP Engineer: Design, material supply, testing & commissioning of ICCP system for folwlines from Sainadah Gas plant station to the nearest wells under the engineering consultancy of Mott Macdonald. The EPC contractor for the project is Al- Hussan & SNCL joint venture

PERSONAL:


Male, Single, 24 Yrs., Valid Omani Driving License


REFERENCES:

Can be provided on request

::Aug 14, 2007::Sept 14, 2007::2454358::08081981::0::0::0 2005::Iwema Eslope Akpobeno::No 37 Umuedafe st ::Effurun ::23::453::2348037164850::eslopeiwema@yahoo.com::Inspection::http://::Position Desired:Coating Inspector ::NACE CIP 1-Certified & BGAS-CSWIP CERTIFIED SITE COATINGS INSPECTOR::Summary:

Objectives:
To meet quality requirements with less rework. This implies higher productivity , lower cost and increase stakeholder's satisfaction.

To complement the team to achieve project quality plan which act as an insurance aganist premature coating failure.

Over 18 years in supervision and inspection of coatings under diverse job title : Foreman, supervisor, inspector.

Project involved inculded : Coating of condensate storage tanks.
Helipad recoatings, Paint inspection and revalidation, Agbami FPSO, Erha North- subsea manifolds, Bonga FPSO , Piple line, Linkes bridges Crude oil storage tanks , water tanks , Pressure vessels , Oilfields , Concrete coating , barges , Pipes coating yard , Wall thickness survey , Waste management , Chemical treatment and Analysis of water and sewage, plant operator in Refinery, Reapplication of TSA over Exhaust Stacks.

Commonly used coatings: Zinc-rich(alkyd, Epoxies) Chloro - Rubber , Acrylics, other epoxies, Urethanes, Glassflake, Non-skids , phenolics, HSS-Canusa wraps, mastic and plastic coatings plus Aluminum wire( TSA).

Experince in the functioning of air compressors , Manlifts, conventional and Airless Equipment , Blast pots, Scaffoldings, WFT, DFT, UT Gages, Holiday detectors, adhesion testers, Surface Profile Gages, Soluble salt test kits.

Costumers: ChevronTexaco, ExxonMobil, SPDC, Shell Deep Waters, NNPC, B+B, Willbros Ofshores, DSC,
Amec, Cameron, Addax Petroleum, Bredero Price, Dorman Long.

Education:
Bsc (Hons) Industrial Chemistry from UNIBEN, Nigeria
NACE Coating Inspector Level 1-Certified, 2008
BGAS-CSWIP Certified Site Coating Inspector No 662 (Current till December 2010).
NACE Membership Certificate # 190787-00
Plan taking NACE CIP Levels 2 later in the year.
FBE-PE Coating Course.
Scaffolding Appreciation Course
Environmental Awareness Course
Basic Fire Fighting Course
ISO 9000 & 14001 Courses
PACER-Corrosion management
HSE Competence Development Course Level 3

Previous Employment:

Dorman Long Engineering Limited Lagos, Nigeria 2008:

Addax Logistics Base Helipad, Calabar, Nigeria. (2007)

Arco Pipeline Solutions Ltd, Port-Harcourt, Nigeria(2007)
Inspection and Recertifcation of Paints for EPC 4A.
To ascertain their useability.

IPES Ltd (PREZIOSO) Port-Harcourt. Nigeria (2007)
Reapplication of TSA over Exhaust Stack Frames from the Netherland.

Velosi Superintendend Nigeria Ltd, Lagos, Nigeria (2006)
Arco Pipeline Solutions Ltd, Port-Harcourt, Nigeria (2005-2006).

Dorman Long Eng. Ltd, Lagos, Nigeria (2005)

RTD Quality Srevices Ltd, Warri, Nigeria (2004)

Daewoo Nigeria Ltd, Effurun, Nigeria (2003-2004)

RTD Quality Services Ltd, Warri, Nigeria 2002-2003)

Overseas Technical Services, Effurun (2000-2001)

ENPOST Warri, Nigeria 1995-1996)

Emmurhua Nigeria Company, warri Nigeria (1993-1994)

Delta Steel Co Ltd, Aladja, Nigeria (1987)

NNPC Refinery, Warri, Nigeria (1983-1984)

Job Description:

Dorman Long Engineering Limited: Coating Inspector.
Blasting and coating of shell internal external plates of condensate tanks.Measured profiles, DFT, adhesion and holiday testings.

Addax Petroleum: Coating Inspector
Blasting and recoating of Calabar base helipad.

Agbami FPSO Topside Construction

Coating Inspector: Conduct substrate condition assessment, witnessed abrasive blasting, inspected blast cleaned and coated surfaces, performed quality control tasks in accordance with the project quality plan. Conduct inspection of coatings and reporting to the facility manager.

Erha North EPC 3-Subsea Manifolds:

Inspector: Conducting and inspecting of grit blasting and painting activities from fabrication shop to touch-up after complete assembly. Performed quality control tasks as well as daily inspection and reporting duties.

Odidi Gas Link Pipeline Construction:

Supervision and Inspection: Supervision and inspection of grit blasting and coatings operations in the shop , oversaw storage, transportation and field touch-up after complete assembly. Conduct quality control tasks, material evaluation, track work progress and reporting.

Bredero Price Coating Yard:

FBE-PE Coating Trainee:

Observed all the grit blast cleaning, coating processes before, during and after coating applications. Followed up the quality control tasks, inspection duties, documentations and stockpiling of coated pipes in the yard.

Field Coating Of Odidi Gas Link Pipeline Construction:

As a Coating Inspector: Supervised blasting , heating, HSS application of Canusa wraps and concrete coating, performed QC tasks on coated field joints. Inspection duties and reporting.

Rehabilitation of NNPC Crude Oil Storage Tanks:

As a painting supervisor and Inspector:Suprvised and inspected blasting and painting of the interior/exterior of crude oil tanks at Escravos, Nigeria. Performed necessary inspection duties, safety and reporting.

Bonga FPSO Topside Construction:

Inspector:Setting up and supervising of the painting department within Daewoo. Prepared painting procedure, carried out supervision and inspection of blasted and coated modules, flareboom, pipes. Performed QC tasks, inspection, material evaluations, audits and reporting.

Maintenance Painting SPDC Production Platforms:

As Inspector: Conduct assessment of old paintworks( corrrosion survey). Witnessed surface preparation, degrasing, fresh water washing, drying, feathering and patch priming of corroded spots, topcoating and application of full finish coat over the entire productioon pipes, structural members, pressure vessels, pumps, flarelines, mainfolds, etc Inspection duties and reporting to SPDC.

Rehabilitation Of Chevron Crude Oil Storage Tanks:

Inspector: Supervised and inspected abrasive blasting and painting of interior/exterior of tanks in Escravos Nigeria. Conduct QC tasks as required by the specification. Carried out material evaluations, and tracking of work progress. Prepared and submitted daily inspection report to Chevron.

Waste Segrgation Composting of SPDC Wastes:

Work Supervisor and Chemical Analyst: Supervision of waste segregation, pulverization, preparation of compost moulds, Develop production records. Performed chemical analysis on the matured and harvested compost at PTI Lab Effurun. prepared and submitted monthly report to SPDC.

Maintenance Painting Of Olomoro/Odidi II Flowstations:

Painting Supervisor: Supervised surface preparation( degreasing, abrading, fresh water washing, drying, feather edgeing) and patch priming of corroded areas, topcoating and full finish coat application over entire production facilities as scope of work. Managed the painting crew, material supplies.Reporting daily to SPDC site inspector.

Water Treatment:

Trainee Industrial Chemist:Observed chemical treatment of potable/sewage waters. Carried out analysis of water and sewage.Prepared and submitted IT report to the IT Coordinator at University of Benin, Benin city, Nigeria.

NNPC Refinery:

Plant Operator: Monitored parameters for the production of gaseous, liquid nitrogen, instrument, industrial oxgen. Developed production records. Prepared and submitted daily production report to the Chief Operator.


::Apr 5, 2008::Apr 18, 2008::2454575::akpoben::1::2::0 2004::Charles B. Emmons::4214 E. Maplewood Way::Centennial::CO::80121-3319::303-770-3106::cbemmons@msn.com::Sales::http://::Sales Manager: ::Qualifications for Territory Sales Management:: CHARLES EMMONS
4214 East Maplewood Way „n Centennial, CO 80121 „n 800.706.4138 primary „n 303.770.3106 alternate „n cbemmons@msn.com

Qualifications for SALES MANAGEMENT

Results-oriented and hands-on leader who offers sales experience, including account development and product specification. Establishes and maintains key, long-term relationships. Track record of generating new sales opportunities, leading to improved profits. Offers extensive experience within the energy industry, including oil, natural gas, product pipeline, refinery, and petrochemical segments. Exhibits honed leadership, interpersonal, presentation, and organizational abilities.

CAREER HIGHLIGHTS

„o Secured a first coatings project for a horizontal directional drilling operation for a US Naval missile base through a US-based engineering firm.
„o Guided a company in developing marketing materials and technical documentation pertinent to US marketing standards.
„o Introduced new corrosion products into the pipeline industry.
„o Achieved profitability through the sale of oil, gas, and water pipeline products manufactured for the industry, with commissions exceeding $100K.
„o Launched a sales program with a major manufacturer, resulting in a 150% boost in sales.

PROFESSIONAL TRACK

Buttonwood Associates/Pipeline Products, Owner/Sales Manager 1999¡XPresent
Strengthened area sales with approval from pipeline coating plant applicators and company end users. Expanded the customer user base and profits for a company specializing in microcrystalline wax pipeline casing fillers.

o Goldschmidt TIB GmbH, (DBA/Buttonwood)Western Regional Sales Manager 1999¡X2002
Headed sales efforts of polyurethane pipeline coatings in the western US in collaboration with offices across Germany, Texas, and Canada. Facilitated product testing programs with pipeline engineering firms, industry coatings applicators, and end-user pipeline operating companies. Collaborative efforts and discussions with this German manufacturer led to enhancement of interest and company directive to fund more globally accepted ASTM test methods for all pipeline coating products manufactured in Germany.

The Tapecoat Company, Western Regional Sales Manager 1996¡X1998
Developed the sales of pipeline corrosion coatings products manufactured in Illinois in a region extending from Alaska to Texas. Forged distributorship relations, resulting in immediate and future sales. Collaborated with engineering departments to fuel sales. Conducted field and classroom training sessions for gas distribution and oil and gas transmission companies throughout North America. Also conducted a training session for pipeline coatings sponsored by the Department of Transportation, Office of Pipeline Safety.

Texas Eastern Gas Transmission Company, Coatings Inspector 1992¡X1996
Directed all project coating inspection functions for mainline and station construction for ¡§big inch¡¨ pipeline initiatives. Honed knowledge of coatings sales by experiencing its application in real time, and working construction environments. Gained comprehensive hands-on experience in all mainline pipeline construction related activities, from right-of-way clearing to cleanup.

Prior to 1986,served as a Stockbroker/Registered Representative for First Eastern Securities and Tri Bradley.

ACADEMIC CREDENTIALS & AFFILIATION

University of Minnesota Bachelor of Arts, Psychology

National Association of Corrosion Engineers
::Aug 3, 2007::Nov 4, 2007::2454409::1413::0::0::0 2003::Joel Settles::12611 Gold Spaniard::San Antonio::TX::78253::2103198143::settles4@sbcglobal.net::Certified or Licensed&&Inspection&&Field Work::::Corrosion Technician ::NACE Certified Cathodic Protection::JOEL SETTLES

12611 Gold Spaniard
San Antonio , TX 78253
Mobile Phone (210) 319-8143

OBJECTIVE
To obtain a job in a field where I can utilize my skills to their fullest potential and gain more knowledge.


EDUCATION
Oliver Wendell Holmes High School – San Antonio, TX Graduation Date: May 1995
(NACE) National Association of Corrosion Engineers – Certified in Cathodic Protection Testing
Cathodic Protection Tester (CP1) – Certification Date: September 2002
Cathodic Protection Technician (CP2) – Certification Date: February 2005
(NACE) National Association of Corrosion Engineers – Rectifier Training Course (Instructed by Universal Rectifiers) Date: August 2005
Smith System Defensive Driving Course On-Road Format Completion Date: June 2003
Required Operator Qualification for Natural Gas Pipeline Systems


COMPUTER SKILLS
Microsoft Word
Microsoft Excel
Microsoft Access
Internet


SKILLS
Complete Knowledge of Natural Gas and Transmission Pipeline Systems (Dot 192)
Troubleshooting
CGI Testing
General Knowledge of LP Storage Tanks and Breakout Piping (Dot 195)
Machine Operating
Class A CDL – Driving
Mechanical Skills
Soil Resistivity Sampling
Manual Labor
Map Reading
Record Keeping
Carpentry
Job Sketch Skills
Pipeline Contruction Inspecting
Assist with Pipeline Integrity Issues


WORK HISTORY

July 1996 – May 2007 Corrosion Control Journeyman, CPS Energy, San Antonio, TX
Duties: Troubleshoot, read, install, design, and maintain cathodic protection systems on steel natural gas lines, steel liquid petroleum lines, and storage tanks;
write work orders, install anodes, locate test stations and valves, install valve insulating kits, locate shorts, review job sketches and make changes in regards to
cathodic protection, take soil resistivity samples, supervise the corrosion control helper, test with a CGI (Combustible Gas Indicator), pipe locating, locate
underground mechanical couplings, retest pipe to soil reads, keep records of findings and make changes to the database files; apply cathodic protection to gas pipelines, oil lines, above ground storage tanks, and dam gates.

::July 30, 2007::Sept 30, 2007::2454374::lauren::1::0::0 2001::Sundaresan Avudaiappan::516 Saint John, Apt 301::Ypsilanti::MI::48197::7342183827::a.sundaresan@yahoo.com::Manufacturing&&Engineering&&Research&&Inspection::http://::Chemist ::Chemist::Sundaresan Avudaiappan

516,Saint John, Apt 301,Ypsilanti, MI 48197
savudaia@emich.edu, Cell:(734)218-3827

OBJECTIVE:

To apply my key skills in a research and development team and build a career to lead a multidisciplinary research team.

EDUCATION:

• Eastern Michigan University, Ypsilanti, Michigan, USA
M.S. Polymers and Coatings Technology (degree sought August 2007)

• Madras University, Chennai, India
B.S. Polymer Technology (June 2001 – April 2004)

• Institute of Chemical Technology, Chennai, India
Diploma in Polymer Technology (June 1997 – April 2000)

PROFESSIONAL EXPERIENCE:

Graduate Research Assistant (August 2005 – Present)
Coatings Research Institute, Eastern Michigan University, Ypsilanti, Michigan, USA

• Currently working in Corrosion project funded by the US Army Research Lab and Tank-Automotive & Armaments Command
• Corrosion Analysis using Electrochemical Impedance Spectroscopy (EIS) Techniques focused on Military Vehicle coatings (Chemical Anti Resistant Coatings)
• Developed a new method to measure relative corrosion of Coatings by using DC EIS technique
• Used AC and DC Electrochemical techniques to measure the corrosion properties of coatings
• Researched on the analysis of individual raw materials/formulation in terms of corrosion potential
• Determined the effect of type and amount of Crosslinkers on Mechanical Properties of Latex
• Evaluated Mechanical properties of Latexes with time by conducting Temperature scans and Stress Strain Analysis of latexes using Dynamic Mechanical Analyzer

Graduate Engineer Trainee (June 2004 –May 2005)
Kanna Industries, Chennai, India

• Part of a team developing new PVC materials as per client’s requirement
• Testing of different grades of PVC compounds

Summer Internships:

SRF India Ltd, Chennai, India (November 2000 – April 2001)

• Tested Mechanical and Thermal properties of Nylon fibers using Universal Testing Machine
• Worked in Nylon 6 and Nylon 6,6 Synthesis and Nylon Tire Cord Manufacturing department

Akhash Enterprises, Chennai, India (May 2000 – October 2000)

• Developed and processed a wide range of compression molded rubber compounds
• Troubleshooting and process optimization in manufacturing of various rubber compounds

PAPERS PRESENTED/PUBLISHED:

• Using DC Electrochemical Techniques to Assess the Relative Corrosiveness of Water-based Coatings and Their Ingredients.”Floyd, F.L., Tatti, S., & Provder, T, Journals of Coating Technology Res, 4 (2)2007
• “Corrosiveness Assessment of Waterborne Coatings and Components by DC Electrochemical Methods”, Federation of Societies for coatings Technology annual meeting and International Coating Expo, October 2006 - Poster
• “Application of EIS to predict the corrosion resistance of coated metal panels”, Graduate Research Fair, Eastern Michigan University, March 2007 - Poster

AWARDS\HONORS:

• Secured University rank ninth position in the three years B.S program of Polymer Technology at Madras University, India.

PROFESSIONAL AFFILIATIONS:

• Member of the Federation of Societies for coatings Technology
• Member of the Detroit Society for Coatings Technology

TECHNICAL SKILLS:

• Hands-on research experience in Formulation of Coatings\Polymers
• Synthesis of Polymers\Resins
• Formulation in High Speed Disperser (HSD)
• Spraying and Applying Coatings on Panels using Spray gun, Drawdown bars and Block applicator
• Color Matching using Spectrophotometer
• Viscosity, Cure, Density, MEK rub test, Scrub test, and Hardness measurements
• Corrosion measurements using AC/ DC Electrochemical Impedance Spectroscopic technique
• Hands-on Continuous and Cyclic Salt Spray Exposure corrosion testing
• Testing & Characterization of Paints\Coatings using Dynamic Mechanical Analyzer, Dynamic Scanning Calorimeter, Dynamic Contact Angle Analyzer, & Scanning Electron Microscopy
• Practical working knowledge in Injection, Compression, Extrusion, and Blow Molding Machines
• General chemistry laboratory instrumentation and Analytical skills

COMPUTER SKILLS:

• Microsoft Office Suite: Data entry, Statistical Analysis, Interpretation of results, and Correlation
• Corrosion Analysis Software’s, ZView & CorrView: Data Analysis and Interpretation
• Design Software’s: UniGraphics, Pro-E, and AutoCAD

REFERENCES:

Available on request
::July 28, 2007::Oct 29, 2007::2454403::e00sundar::1::0::0 2000::Lakshminarasimha Murty Tata::Aravagaru St, Indupalli, Bandarlanka, E.G.Dist, AP::533221::AP::India::00918856233631::lnmurthytata@yahoo.com::Sales&&Management&&Office&&Computer&&Manufacturing&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://www.lnmurthytata.page.tl::Position Desired: Corrosion, Chemist, Lab ::Oil and Gas Corrosion Chemist Laboratory::Dear Sir,

I am having Master of Science in Applied Chemistry, Master of Business Administration in Operations Management, Diploma in Software Technology, Diploma in Industrial Safety Management & Post Graduate Diploma in Environment and Sustainable Development. I am also a Certified Corrosion Technologist from NACE International, USA .

I am having 6 years experience in oil and gas up stream laboratory. I am having exposure mainly to internal corrosion monitoring, chemical treatment, cathodic protection, effluent treatment plant operations, environment management & oil and gas laboratory management. My total experience in the field of chemistry is 10 years.

I have worked with ISO, NACE, ISRS, STOP, ASTM, API standards. At present I am working in Special Oilfield Services Co. (LLC), Sultanate of Oman With Nalco Team Working for Petroleum Development Oman.

I have taken care of internal corrosion management and chemical treatment of North Oman . I am having exposure to work in Desert conditions. I have submitted my resignation and getting relieved on 16-Aug-2007

See my web site : www.lnmurthytata.page.tl

With Regards,

T.L.N.Murthy::July 27, 2007::Oct 28, 2007::2454402::tssmurthy::1::0::0 1999::goutam ghosh::KNPC, SHUAIBA REFINERY, KUWAIT::KUWAIT::96::56629772::+9653721495::goutamkw@yahoo.com::Engineering::http://::CORROSION & MATERIALS SPECIALIST ::CORROSION SPECIALIST::CURRICULUM VITAE

„Z Graduated in METALLURGICAL ENGINEERING in 1982 from a reputed institute in India.
„Z In 1982,joined as Inspection engineer of static equipment in Haldia refinery of Indian Oil Corporation Ltd, India.
„Z In 1990 promoted to Sr.Inspection engineer and transferred to Gujarat refinery.
„Z In 1993,joined Shuaiba refinery of Kuwait National Petroleum Company in Kuwait as ENGINEER-CORROSION & METALLURGY.
„Z Certified ¡¥CORROSION SPECIALIST¡¦ & ¡¥MATERIALS SELECTION & DESIGN SPECIALIST¡¦ by NACE INTERNATIONAL, USA.
„Z Conversant with different forms of petroleum industry corrosion and corrosion control, material selection and joining techniques.
Conversant with Risk Based Inspection (RBI) analysis and Fitness For Service (FFS) analysis of equipment
::July 10, 2007::Oct 11, 2007::2454385::gggggg::0::0::0 1997::Greg Hodges::P.O. Box 85::Hamshire::Tx::77622::409-466-2198::hodgesgreg382@aol.com::Sales&&Management&&Office&&Computer&&Intern&&Manufacturing&&Engineering&&Certified or Licensed&&Research&&Inspection&&Field Work&&Miscellaneous::http://::Position Desired: ::NACE and SSPC certified:: Greg Hodges
PO BOX 85
Hamshire, Texas 77622
409.243.2797 Home
409.466.2198 Cell
E-mail : hodgesgreg382@aol.com


Summary:

Over twenty years experience in the coatings industry. I have extensive experience in supervision, project management and inspection of coatings.

Projects include: Pipelines, Oilfield Facilities, Marine facilities, refineries, chemical plants and their equipment. blast yards, ship yards, ships, barges, offshore platforms, offshore drilling rigs, bridges, water towers, rail cars, oil storage tanks, silos, clarifiers, heat exchangers, towers, boilers, heater stacks, flair stacks, vessels, knock out drums, pipe, pipe racks, secondary containments, tank and vessel liners. Assembly, dye penetrates mag particle and hydrostatic testing of blow out preventers for drilling rigs.

Coatings routinely used and inspections performed on: Zincs / (epoxy, organic and inorganic), various Epoxies, 100% Solids, Urethanes, Anti Foulants, Liquid CO2 Injection direct to earth application, various Non-skids, Flake Glass and Fiberglass / (chop and hand lay) and Thermal Spray applications .

Experience in the operation and repair of : 15 and 18 Ton Mobile Cranes, Bridge Cranes, Forklifts, Backhoes, Skid Steer Loaders, Air Compressors, Spiders and Staging, Airless Pumps 30:1,45:1,65:1,Plural Component and Conventional Spray Rigs. Blast Rigs; Wheelebrators 6 Bag pots, 6 Ton, 14 Ton.

Customers include: United States Oil Petroleum Reserve, Rescar, Dupont, Dupont Sabine River Works, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcore, Texaco, Motiva, Betz, Sun Oil, Independent Refining, Farmland Refining, Onyx, Midvalley Pipe Line, Cities of Beaumont and Port Arthur Water Districts, Diamond Offshore, Ensco, Noble, T.D.I., Signal, Sabine Offshore, Corpus Christi Oil and Gas, Sabine Towing, Vessel Repair and Calcaseau Marine, Hydril.

Disaster Relief Projects: Hurricanes - Charley, Frances, Jeanne, Ivan, Katrina, Rita.
Three years as Operations Manager for the FEMA blue roof program.
Duties included: Subcontract management, Tracking, Scheduling, Safety, Public Relations and Payroll of over 400 + employees in three states.
Working in close relations with L.J.C. Defense Contracting and the Corps of Engineers


Education:
Calhoun County High School
Associated Builders and Contractors Advanced Coatings Course - Beaumont, TX, 2001
NACE Certified Coatings Inspector. NACE No. 11855,Expires 2010
NACE Bridge Stamp
SSPC C-3 De-leading Certification
NCCER Pipeline Certification-Abnormal Operating Conditions-General Pipeline
Confined Space Trained Yearly Update, Industrial Safety Training Council
Competent Scaffold Inspector, Performance Blasting and Coatings
Spider and Staging Certification, Performance Blasting and Coatings
OSHA 500 10 Hour Safety Training Course
Lead Training, Protherm Services Group L.L.C.
Hydril Performance Group Member

Past Employment:

Charles N. Rayburn Enterprises, Port Lavaca, Texas (1978 - 1981)
Hydril - North Belt, Houston, Texas (1981 - 1984)
Candice & Lindsey Corporation, Houston, Texas (1984 - 1985)
H & H Painting and Remodeling, Beaumont, Texas (1985 - 1986)
A Way Tank Service, Beaumont, Texas (1986 - 1987)
Sabine Offshore, Sabine Pass, Texas (1986 - 1987)
Steel Painters, Beaumont, Texas (1987 - 1990)
Echo Construction, Port Arthur, Texas (1990-1997)
Performance Blasting & Coatings, Port Arthur, Texas (1997-2001)
Protherm Services Group L.L.C. Fannett, Texas (2001-2004)
Precision Disaster Services, L.L.C., Winnie, Texas (2004-2006)
Progressive Technical Services, Belle Chasse, La (2006)
Shaw Constructors, Prairieville, La (2006-2007)

Job Description:

Shaw Constructors:

Welding and coatings inspector/field coordinator
Duties included: Field coordinator tracking production and cost of the coatings contractor. Maintaining and conducting field quality oversight activities in accordance with the sight quality execution plan.
Conducting welding and coatings inspection of pipe and structural assemblies by use of drawings/P&ID’S. Witnessing mechanical installations including torque/tensioning of bolted connections, witnessing hydraulic/pneumatic testing and verification of MT/PT/VT and RT surveys.

Progressive Technical Service:

Project Manager and Inspector for Offshore sandblasting and painting operation.
Duties included: safety, sub contractor management, tracking, expediting supplies and man power, tracking cost, inspection of coatings, and reporting.

Precision Disaster Services, LP:

Operations Manager over Florida, Louisiana and Texas temporary FEMA blue roof projects.
Duties included public relations, sub-contract management, scheduling, expediting, tracking and payroll of approximately 400 personnel while working in close relationship with the Corp of Engineers.

Protherm Services Group L.L.C.

Site Superintendent at Dupont in Orange, Texas supervising 50 to 200 employees for the paint
maintenance program.
General foreman at Exxon Mobil in Beaumont, Texas in charge of all turnarounds and
maintenance painting and also in charge of numerous pipeline and oil storage tank projects involving various liners and coatings including extensive knowledge in Thermal Spray applications.

Performance Blasting and Coatings:

Supervisor and Inspection. Projects: Abrasive blasting and coating of interior / exterior of rail cars and oil storage tanks. Interior liners consisted of: thin film, hand lay, and chop fiberglass. Supervised
turnarounds and maintenance projects for Chevron, Motiva, Onyx, Sun Oil, Total, Fina, BASF, and
including numerous pipeline and marine projects such as barges, crew boats, ships and drilling rigs. Daily coating inspections and reporting.

Echo Construction:

Supervisor and Inspection. Setting up and supervising the painting department within company. Duties included coating pipe from fabrication to field touch-up after assembly in all local area refineries and chemical plants. Responsible for setting up and supervising a three year project in Kansas; Involving a specialized direct to earth thick film liner and periodically supervising pipe fitting and welding operations as needed by use of drawings/P&ID’S. Coating inspections and reporting performed daily.

Steel Life Incorporated

Supervisor. Projects: Abrasive blasting and coating of oil storage tanks, exterior and interior including
tank liners: thin film, hand lay, chop fiberglass. Turnarounds and maintenance projects,
within Texaco refinery, Savannah road bridge and Bridge components for U.S. steel. Various marine projects such as barges, crew boats and ships. Responsible for all daily inspections and reporting.

Sabine Offshore:

Projects: Mexico 3 Rig as a journeyman blaster/painter. Supervisor of operations in the blast yard.
Coating of shrimp boats. Inspections and reports carried out daily.

A Way Tank Service:

Supervise Coatings operations on interior and exterior of water towers in the Beaumont Texas Area.
Responsibilities included performing and reporting all necessary inspection duties.

H & H Painting and Remodeling:

Self Employed. Commercial painting of Apartment complexes and remodeling of homes

Candice & Lindsey Corporation:

Operations Manager. Supervise & Manage all operations involved with the After Dark clubs I and II and Dancers Night Club. Duties included employee relations, schedules, inventory, and all duties included in the day to day operations of the (3) night clubs.


::June 29, 2007::Sept 30, 2007::2454374::::1::0::0 1995::Richard K Sniffen Sr.::PO Box 5::Texhoma::OK::73949::580-651-2652::pontaweecamp@yahoo.com::Certified or Licensed::http://::Corrosion Technician ::NACE Certied Corrosion Technician::Education:

NACE International Corrosion Technician Certification March 2007

BASIC Cathodic Protection Course certification from NACE International 2006

Universal Rectifier School certified by Seward County Community College 2005

Oklahoma State University - Fire Service Training Center Stillwater, Oklahoma Certification Issued in
Fire Academy AB & C 1993
Arson Investigation 1993
Instructor Level I 1994
IFSTA Instructor Level I 1994

Business Management Lake Henry Trade School Littleton, Colorado certificate issued 1985

High School Diploma awarded in 1979


Employment :

2004 - Present
Western Gas Interstate / West Texas Gas Inc
PO Box 1079 West Hwy 54
Guymon, Oklahoma 73942 Supervisor Paul Moore
Position Corrosion Technician Distribution System
I take care of all aspects of cathodic protection in the distribution system of the company including but not limited to Pipe to Soil Survey, Soil Resistivity Testing Installation of Conventional Ground Beds, Rectifier Reading and repairs, Installation of Anodes by Cadweld.

1996 - 2004
West Texas Gas
PO Box 160 203 S. Second Street
Texhoma, Oklahoma 73949 supervisor Derrell Lansford
Position Servicemen
I take care of installation of all new gas utility services including residental, Commercial and rural customers, Leak Survey, Corrosion Control, Reading Rectifiers and Pipe to Soil Surveys.

1987 - 1996
Cimarron Oil & Gas
Industrial Park
Guymon, Oklahoma 73942 Supervisor Danny Pearson
Position UL & ASME Code Inspector, Draftsman and Inventory Control, Shipping and Receiving
I inspected all code vessels through construction phases, Inspected Coatings and Painting of vessels
Also did some Auto Cad 14 Drafting, Shipped out and received all daily inventory and vessels logged for shipment. Code Instections included stamping the "U" Stamp on all code tags of passed vessels after State verification of units.


::June 26, 2007::Sept 27, 2007::2454371::hitchman::1::0::0 1993::Brett Lease::5312 Corteen Place #7::Valley Village::CA::91607::818-392-8566::brettlease@roadrunner.com::Sales&&Research&&Field Work::http://::Position Desired: Any ::Chemical Account Manager with corrosion treatment experience:: BRETT WILLIAM LEASE

5312 Corteen Place #7
Valley Village, California
91607
Telephone: (818) 392-8566
Email address: brettlease@roadrunner.com
Objective
To obtain employment in the oil and gas producing industry. I am willing to re-locate my family at this time and would consider multiple areas.

Education
California State University, Bakersfield, California
Bachelor of Science, Chemistry
Junior Status with intention of completion at later date.

Summary
Highly motivated, creative and versatile individual with experience in the oil field chemical treatment service industry. Highly skilled at problem solving, and meeting and exceeding the customers needs.

Selected Skills & Accomplishments

• Optimized existing surface treating chemical program resulting in greater than $100,000 in chemical cost per year while lowering the operating cost by $500,000 per year.
• Identified, and implemented chemical treatment program changes that severely reduced bacteria and corrosion related issues in a large offshore oil separation and water handling complex.
• Identified, and implemented chemical inhibition treatment program changes of deep, hot, and highly deviated onshore wells. The improved performance resulted in a 50 % reduction in well failures due to corrosion, scale and paraffin.

Computer and Other Skills
Proficient in CAD, AutoCAD, MathCAD, C++, Word, Access, and Excel.
Basic training and understanding of Lean Sigma and Six Sigma process.
Experience
District Account Manager, BJ Chemicals, Long Beach, California 2006-2007

Served as an account manager for the Occidental THUMS Long Beach account. The THUMS project is a series near shore oil producing islands located in the Long Beach Harbor. The main areas of chemical treatment were downhole scale, and corrosion control in electric submersible pumped wells, and water clarification suitable for sub-surface injection.

Account Manager, BJ Chemical Services, Cymric, California 2005-2006

Served as an account manager for the Chevron Cymric account. The Cymric Field is located in the San Joaquin Valley in central California. It produces light paraffinic crude oil, and natural gas. The main areas of chemical treatment were wet gas internal corrosion inhibition and gas hydrate control, downhole scale, corrosion and paraffin control in deep rod pumped wells, and water clarification suitable for surface percolation pond discharge.

Laboratory Technician, Clariant Oil Services, Taft, California 2003-2005

Co-managed the Clariant regional laboratory. Improved and standardized written testing procedures. As lead technician, I was responsible for Clariant’s local blending facilities quality control (QC) for raw materials and finished products. Job duties involved conducting geochemical water analysis, pH, alkalinity, iron counts, scale and corrosion inhibitor residuals, corrosion coupon analysis and general laboratory procedures for quality control for oil field chemical blending operations. Responsible for creating computer tracking reports for laboratory data storage.

Laboratory Technician, Midway Lab, Taft, California 2002-2003

Performed various oil and water tests including geochemical water analysis, pH, alkalinity, iron counts, API gravity and viscosity, and other general laboratory procedures.


::June 11, 2007::Sept 12, 2007::2454356::sulu00::0::0::0 1992::JOSEPH N. OFUASE::Suite 12, Abali Plaza, 57A Emekuku Street, D/Line,::Port Harcourt, Rivers State::RV::500003::+234-803-3105584::joeofuase@yaoo.com::Inspection::http://::Position Desired: ::CORROSION INSPECTION::B.Sc. CIP 1 & CIP 2 (2006)
Over 15years of Corrosion Inspecting Experience.
- Corrosion Control/Inspection.
- Painting Project Management.
- Painting Inspection.


Contact me for further information on Resume. ::June 8, 2007::Sept 9, 2007::2454353::maamaa::1::0::0 1985::Javed Bashir::Dodsal Engineering & Construction Pte.Ltd.::Abu-Dhabi::UAE::39378::+971505217586 ::javed_saudi@hotmail.com::Engineering::http://::CP Project , Project Lead Engieer ::CORROSION / CATHODIC PROTECTION ENGINEER, ::Please ask for detailed CV.
Highlight

Comprehensive practical and commercial experience since 1997 in every aspect of cathodic protection systems on all types of structures, comprising detailed design preparation / engineering calculations and Preparation of proposals with design philosophy, estimation of project cost, specifications of equipment, sourcing, pricing bid follow up and negotiating contracts etc. for various projects. Review & comments & recommendation on various design and materials as per specification of clients, Various site surveys, installation, installation training, supervision of installation, pre-commissioning, commissioning report writing, CP remote monitoring, site various investigative surveys including current requirement survey, stay current and interference surveys, AC mitigation study and mitigation, recommendations for up-gradation, trouble-shooting of transformer rectifiers & various systems, manufacturing, assembling and testing of CP equipments.
1.0 This project is one of the biggest Concrete Cathodic Protection projects of the Middle East, Where each and every piece of concrete is cathodically protected by means of MMO Ribbon Mesh Anodes, a huge quantities of Eltech200 mesh anode, Titanium Conductor Bar, MMO tubular canister anodes, MMO wire canister anodes, Ag/Ag Cl for water & concrete application, Prepackage Cu/Cuso4 Reference Electrodes, Huge quantities of different size with different colour code of cables, million of plastic rebar’s clips and different types sizes of junction boxes etc. 100% Remote monitoring & control system, huge numbers of Digital SMPS multi channels power supplies modules & Oil cooled Transformer Rectifiers for
Protection of Piles of pipe supports.
2.0 (Cathodic Protection Specialist Company)
• SADAF/SABIC, Styrene plant, Jubail for Daelim Arabia: Bid preparation & detail design engineering under supervision of engineering manager. Installation supervision, testing and commissioning for M.M.O. grid anode system and VIP / auto potential controlled type TR 10 nos. for under tank bottoms and sacrificial CP system for utility pipelines.
• The Various projects includes, trouble shooting and maintenance for transformer rectifiers, AC mitigation & stray current studies, remedial action plan and recommendations, integrity of CP system with various method like interruption of power supply and measuring of instantaneous off and ON potential, potential decay tests, Fault rectification of impressed and sacrificial CP system for tank internal, under tank bottoms, pipelines, pilings, vessels etc for various industries and facilities like Rastanura refinery, Rabigh refinery, Yanbu refinery, Luberef Jeddah and Yanbu, Sab-tank, Sipchem, JUPC, Sadaf, Saline Water Conversion Corporation and in many more industries, almost in each and every refinery of Saudi Aramco and petrochemical facilities of Sabic in my tenure.

• The project consist the Installation supervision, testing and commissioning of CP system for the RTDB-1(Saudi Aramco) pipeline at Rastanura to Dhahran about 60 Km long pipeline. There are remote deep anode ground bed and surface ground beds.
• Temporary Sacrificial CP system installation for NGDC pipeline at Second Industrial City, Riyadh.
• The project with Khodari & Sons Co. for Saudi Aramco: Installation supervision, testing and commissioning of MMO ribbon anode grid CP system for five under tank bottoms at Duba bulk plant.
• AGOC / KGOC. Khafji-Joint Operations Co. 2 under tank bottoms of protected by Zinc Sheet anodes for ACMC. Sacrificial CP system for sea water intake pipeline and up-gradation of fire water equipments. CP up-gradation for the tank bottoms, replacement of TR and commissioning the system.
• Saudi Petrochemical Co. Jubail (Sipchem) for Nippon Corrosion Japan, The system design by Nippon corrosion Japan and they hire us for the installation supervision, testing and commissioning, CP system for the protection of cooling incoming and outgoing pipelines by MMO wire, protection of cupper ground rods and fire equipments by Magnesium anodes, under tanks bottoms by MMO wire/ piggy-pack system, I was commissioned the system under supervision of Nippon Corrosion’ CP specialist.
• Soil resistivity survey and data collection for design of permanent cathodic protection system for multiple oil production well casings of 34 drilling site of Qatif GOSP-1 and GOSP-2 producing facility of Saudi Aramco. System consists of 34 Nos. of CP Stations including 80 deep anode ground beds for Zate.
• Installation supervision, testing and commissioning of cathodic protection system for buried piles 700 Nos (approx.) at Khuff condensate fractionation plant at Ras Tanura Refinery of Saudi Aramco. The work also includes cathodic protection system for Earthing network, tanks and fire hydrant. The system consists of 13 CP stations including 140 distributed silicon iron anodes.
• Installation supervision of MMO ribbon anode grid system of two 38 m dia. tanks and Zinc ribbon anode for other two 8 meters dia. tanks of DHT plant in Yanbu refinery, Yanbu.
• Soil resistivity survey and data collection for designing of on shore well casing in the eastern province of Saudi Aramco for Zate.
• The project with Sabic for Assessment survey for up-gradation of CP system in Petrokemya (Sabic), the survey including following tests, potential measurement, anode output current, actual current requirement test by means of feeding temporary power to existing Galvanic anode or temporary anode and measure the potential shift and TR output, system designing on the bases of recommendations for up-gradation.


3.0 “OFF SHORE”.

• The project includes: Installation, installation supervision, testing and commissioning, commissioning report of platform columns and well casings. The platform # Qatif 96/101 & Qatif 20,29/95 each of consisting 6 and 5 well casings, the system consists of one each CP station. The TR rating of 50 V/ 300 ampere and two pyramid type anodes installed in remote
location in the sea bed.
• Installation supervision, testing commissioning, commissioning of unloading berth at Duba bulk plant. The system consisting of two Pyramid anodes and one transformer rectifier.
• Project with Saudi Aramco for Yanbu Refinery Marine facility, CP UPGRADATION PROJECT: Work as Project Coordinator & Project Engineer. There are 4 loading berths for hydrocarbons. The job includes the supply of materials, installation, testing commissioning including the installation of anchor blocks, Pyramid anodes, MMO strings, Retro buoy anodes, fixing of cables on the cable trays and installation of transformer rectifiers. There are 4 loading berths for hydro carbons products, Two berths each of consisting 2 Pyramid anodes, one each Retro-buoy anode and 14 each MMO strings and for other two berths consisting of One each Pyramid anode and 11 each MMO strings and feeding by 19 transformers rectifiers.
::Sept 1, 2007::Sept 20, 2007::2454364::7064::0::1::0 1984::Khaleel Rehman::3100 McCann # 903::Longview::TX::75605::903-399-0095::ksrehman@hotmail.com::Office&&Intern&&Certified or Licensed&&Inspection&&Field Work::http://::Position Desired: Corrosion Tech ::Nace Certified CP 1:: KHALEEL REHMAN
3100 McCann Rd#1108 ♦ Longview, Texas 75605 ♦ (903)3990095
ksrehman@hotmail.com


OBJECTIVE:
To obtain acceptance as a Corrosion Technician/Pipeline Integrity Management


SUMMARY:
NACE Certified CP Level I
Practical Knowledge of ECDA Procedures
Good management experience
Energetic multi task performer and willing to travel in and outside the U.S.


EDUCATION:
Kilgore College (Kilgore, Texas)
Corrosion Technician Certification
Spring 2007
Cumulative GPA: 3.08


Kilgore College (Kilgore, Texas)
Associate of Arts
Fall 2005


COMPUTER SKILLS:
Technical Tool Boxes
ProActive
Geo Express
MS Office (Access, Excel, Word, Publisher, Outlook)
Adobe Illustrator 8.0
QuickBooks

EXPERIENCE:
TechCorr USA (www.Techcorr.com) (Pasadena, Texas)
Field Crew Lead/Corrosion Technician
May 2007 - Current
Performing GPS, PCM, ACVG, DCVG and CIS Surveys, pH tests, Soil Resistivity tests and ground bed installation
Performing Eddy Current and RFT Tests on Boilers and Heat Exchange.
Assisting API 653 Inspector in performing Above Ground External Tank Inspections.
Assisting API 570 Inspector in performing Process Pipping Inspections.
Performing NDT Inspections in refineries and chemical plants.

O'Yeah Incorporation (Longview, Texas)
Store Manager
May 2006 - April 2007
Managing day to day store operation
Implementing new ideas to increase store sales
Accounts payables / Accounts receivables
Payroll / Taxes
Inventory Management


Global Vehicles Inc. (Longview, Texas)
Auto Dealership Manager
June 2005 - May 2006
Among duties performed was troubleshooting and repairing auto electric system

Sheikh Incorporation (Longview, Texas)
Cashier, Assistant Manager, Manager
Jan. 2002 - June 2005

REFERENCES:
Tanveer Ali, Pipeline Project Manager , TechCorr, Pasadena TX (832) 818-5157

Ms. Brenda Thornhill, International Student Adviser, Kilgore College, (903) 983-8204

Mr. Jerome Edinger, Corrosion department Instructor , Kilgore College, (903) 983-8165
::Mar 21, 2008::May 22, 2008::2454609::rubina95::1::3::0 1982::Hemal J Bhatt::305/A-1, Mangalmurti Park, Sector-8::Gandhinagar::GU::382008::00966-50-3892851::hemaljbhatt@yahoo.com::Engineering::http://::CATHODIC PROTECTION SUPERVISOR / ENGINEER ::NACE CP-2 CERTIFIED::Education Qualification: Diploma in Electrical Engineering, April 1994

Professional Qualification: NACE Cathodic Protection Level-2 Certified # 8789
- Approved candidate for NACE Cathodic Protection Level-3.

Professional Affiliation: Member of National Association of Corrosion Engineers (NACE)-USA, Since 2001.

Professional Training

• Undergone company training of Corrtech International Pvt. Ltd. Ahmedabad – India for two weeks including classroom lectures and practical training of site activities like survey, construction and monitoring.
• Undergone drill steam resistance measurement training of CORRPRO CO. INC. (USA) – Abu Dhabi, UAE.
• Undergone ISO 9000 awareness training of Abdulla Fouad Impalloy Ltd.Co.

Summary of experience:

Comprehensive experience in all the aspects of Cathodic Protection including pre-design survey, design & engineering, construction, testing, commissioning, monitoring & maintenance and trouble shooting of ICCP and Sacrificial Cathodic Protection systems for pipelines, tanks and well casings (oil/water/gas) on various projects initially in India and subsequently in the Middle East. Worked in the capacity of Cathodic Protection Engineer / Supervisor / Technician on various projects.

Also involved in installation of SCADA system software for remote monitoring and mitigation of interference effect caused by HVDC railway.

ABDULLA FOUAD - IMPALLOY LTD. CO. (AFIC) - SAUDI ARABIA.
(August 2005 to Date)
Position: Cathodic Protection Engineer.
Work Assignments:
• Preparation of quotations based on enquiry specifications.
• Carrying out various site surveys to form the basis for detail design and engineering.
• Preparation & submission of detail design and engineering package for approval of clients.
• Execution and supervision of installation of the CP equipments.
• Testing and commissioning of the CP system.
• Preparation and submission of as built documentations.

Major Project involvement at AFIC, Saudi Arabia, (Year 2005,2006 and 2007)
Position: Survey & Design Engineer
• Survey and design of Cathodic Protection system for well casings (single/multiple) at various oil fields for Saudi Armco, Saudi Arabia. (Involved in survey and design for more then 600 well casings.)
• Survey and design of Cathodic Protection system for multiple well casings for Sabkah-21,54 & 63 at Shaybah for Saudi Armco, Saudi Arabia.
• Survey and design of Cathodic Protection system for multiple well casing for Saudi Aramco Sabkah-15,83 & 40 at Shaybah, for Saudi Aramco Saudi Arabia.
• Survey and design of Cathodic Protection system for onshore and cause way multiple well sites (45 Nos.) and under ground pipelines at Manifa for Saudi Aramco, Saudi Arabia.
• Survey and design of Cathodic Protection system for newly laid FW pipeline for Ar-Razi (SABIC) at Jubil, Saudi Arabia.
• Survey and design for 30” WFH pipeline at Aindar WIP-1 for Saudi Aramco, Saudi Arabia.
• Survey and design of 28” high temperature crude oil pipeline from Qatif GOSP-1 to GOSP-2 for Saudi Aramco, Saudi Arabia.

Position: Installation Engineer
• Installation of SCADA system software for multiple well sites at Abu Hadariya, Fadheli and Khursaniya for Saudi Aramco, Saudi Arabia.
• Installation of internal and external Cathodic Protection systems for FW tank at Madina Bulk Plant for Saudi Aramco, Saudi Arabia.
• Installation of tank external Cathodic Protection system using Zinc Sheet anode at Al-Khafji for Kuwait Joint Operation (KJO), Saudi Arabia.
• Installation of tank external Cathodic Protection system for Ibn-Rushed plant (SABIC) at Yanbu, Saudi Arabia.
• Installation and testing of tank external Cathodic Protection system for SWCC at Shuqaiq, Saudi Arabia.
• Installation of tank external Sacrificial CP system using Zinc Ribbon anode at Al-Khafji for Kuwait Joint Operation (KJO), Saudi Arabia.

Position: Testing & Commissioning Engineer
• Commissioning of tank internal Cathodic Protection system for SWCC at Al-Khobar, Saudi Arabia.
• Commissioning of Tank external Cathodic Protection system for Saudi Electricity Co. at Rafha, Saudi Arabia.
• Commissioning of Cathodic Protection for Methanol pipeline at Ar-Razi (SABIC) at Jubil, Saudi Arabia.
• Commissioning of Road crossing pipelines at Jizan, Abha & Najran Bulk Plants for Saudi Aramco, Saudi Arabia.

CORRPRO CO. INC (USA) – ABU DHABI, UAE.
(March 2004 to November 2004)
Position: Cathodic Protection Field Technician / Supervisor
Work Assignments:
• Soil resistivity survey.
• Verification of anode bed location.
• Supervision of Installation of CP equipments.
• Measurement of drill stream resistance to decide the actual depth of deep anode bed.
• Measurement of anode bed resistance.
• Commissioning of CP system powered by Transformer rectifier and Solar system.
• Preparation and submission of commissioning report.

Project involvement at CORRPRO CO. INC.(USA) – Abu Dhabi, U.A.E (Year- 2004)
• EPC project for Cathodic Protection of 1350 Nos. well casing for Abu Dhabi Company for Oil Operation-ADCO. (The largest project ever in the history of Cathodic Protection).

AL-MEER TECHNICIAL SERVICES CO. W.L.L. (ATSCO) – KUWAIT
(January 2001 to November 2003)
Position: Cathodic Protection Technician
Work Assignments
• Monitoring and preventive maintenance of sacrificial and impressed current CP systems.
• Carrying out various surveys for route cause analysis of low potential readings.
• Trouble shooting.
• Interference survey.
• Supervision of CP system installation for newly installed structure.
• Preparation of as-built drawings.
• Preparation and submission of monitoring reports.
• Preparation of quarterly presentation of CP maintenance activities.

Project involvement at AL-MEER TECHNICAL SERVICES CO. – KUWAIT
• Monitoring and maintenance of Cathodic Protection system for various plants of EQUATE PETROCHEMICAL CO. (KUWAIT).

CORRTECH INTERNATIONAL PVT. LTD. – AHMEDABAD, INDIA
(October 1996 to December 2000)
Position: Cathodic Protection Site In-charge
Work Assignments
• Carrying out various site surveys to form the basis for detail design and engineering.
• Execution and supervision of installation of the CP equipments.
• Testing and commissioning of CP system.
• Monitoring and maintenance of existing CP system.
• Preparation and submission of as-built documentations.
• Mitigation of interference effect caused by HVDC railway.

Major Project involvement at CORRTECH INTL. PVT. LTD. (Year- 1996 to 2000)
Position: Project Engineer
• Design, supply, installation and commissioning of Impressed Current Cathodic Protection system for Mahanagar Gas Ltd. Mumbai- India for their existing gas pipeline in the city of Mumbai.
• Design, supply, installation and commissioning of Sacrificial Cathodic Protection system for Mahanagar Gas Ltd. Mumbai- India for their gas pipeline being laid in the city of Mumbai.
• Design, supply, installation and commissioning of Impressed Current Cathodic Protection system for underground pipeline of Rastriya Chemical and Fertilizers, Thal – Maharastra, India.

Position: Site In-charge
• Monitoring and maintenance of Cathodic Protection system for underground pipeline of Indian Petrochemical Corporation Ltd. (IPCL), Maharastra Gas Cracker Complex, Nagothane– Maharastra, India.
• Monitoring and maintenance of Cathodic Protection system for underground pipeline of Gas authority of India Ltd. (GAIL), Mumbai-India.

Other Experience:

ENERCON INDIA LTD.-DAMAN, INDIA
(May 1996 to September 1996)
Position Supervisor (Generator Shop)
Work Assignments:
• Supervision of manufacturing and testing of gearless wind turbine generator.
Jyoti Ltd.-Vadodara, India
(October 1994 to April 1996)
Position: Jr.Engineer (QC & Inspection)
Work Assignments:
• Inspection and testing of various types of electrical machines.::Jan 14, 2008::May 21, 2008::2454608::9101974::0::3::0